Yesterday i wrote i got all my suspend problems fixed in -rc3. i tried -rc4-git1 and got another problem after suspend.
on resume, i can use no more che ehci device (pci usb card). on -rc3, after resume hotplug could reload device driver, while with rc4 device is no more found, neither after unplug/replug. infact lsusb shows: Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 i have to reboot (usb are built-in) and i can get: Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 004: ID 0915:8000 GlobeSpan, Inc. Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 this is a rc4 regression, i saw Greg posted some patches... this is the dmesg: Stopping tasks: ===================| Freeing memory... done (4076 pages freed) ACPI: PCI interrupt for device 0000:00:0d.0 disabled ACPI: PCI interrupt for device 0000:00:0a.2 disabled ACPI: PCI interrupt for device 0000:00:0a.1 disabled ACPI: PCI interrupt for device 0000:00:0a.0 disabled ACPI: PCI interrupt for device 0000:00:09.0 disabled ACPI: PCI interrupt for device 0000:00:04.2 disabled swsusp: Need to copy 7852 pages ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 eth0: Setting promiscuous mode. ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt 0000:00:0a.2[C] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:00:0a.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004 ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9 eth1: Setting promiscuous mode. Restarting tasks... done usb 2-2: new full speed USB device using uhci_hcd and address 3 usb 2-2: device descriptor read/64, error -71 usb 2-2: device descriptor read/64, error -71 usb 2-2: new full speed USB device using uhci_hcd and address 4 usb 2-2: device descriptor read/64, error -71 usb 2-2: device descriptor read/64, error -71 usb 2-2: new full speed USB device using uhci_hcd and address 5 usb 2-2: device not accepting address 5, error -71 usb 2-2: new full speed USB device using uhci_hcd and address 6 usb 2-2: device not accepting address 6, error -71 usb 2-2: new full speed USB device using uhci_hcd and address 7 usb 2-2: device descriptor read/64, error -71 usb 2-2: device descriptor read/64, error -71 usb 2-2: new full speed USB device using uhci_hcd and address 8 usb 2-2: device descriptor read/64, error -71 usb 2-2: device descriptor read/64, error -71 usb 2-2: new full speed USB device using uhci_hcd and address 9 usb 2-2: device not accepting address 9, error -71 usb 2-2: new full speed USB device using uhci_hcd and address 10 usb 2-2: device not accepting address 10, error -71 lspci 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) 00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) 00:04.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) 00:04.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) 00:04.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) 00:04.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02) 00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30) 00:0a.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) 00:0a.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50) 00:0a.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) 00:0b.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01) 00:0d.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) 01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 RF/SG AGP -- www.patriziobassi.it ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
