On Tue, Dec 06, 2005 at 07:54:31PM +0100, Carl-Daniel Hailfinger wrote:
> Hi,
Hi Carl-Daniel,
> since I switched to 2.6.15-rc2-git6, my machine is not able to suspend
> anymore if my USB printer is plugged in. The problem is reproducible.
>
> usb 1-2: new full speed USB device using uhci_hcd and address 3
> drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt
> 0 proto 2 vid 0x04E8 pid 0x3242
> usbcore: registered new driver usblp
> drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
> PM: Preparing system for mem sleep
> Stopping tasks: ==================================================|
> usblp 1-2:1.0: no suspend?
> Could not suspend device 1-2: error -16
> Some devices failed to suspend
> Restarting tasks... done
>
>
> Earlier kernels (2.6.14.2 and before) worked just fine.
>
> A first search suggests this problem was introduced between
> 2.6.14 and 2.6.15-rc2-git6. Should I try to narrow it down further?
yes, that would be good.
In this case, it would also help if you'd open a bug at
bugzilla.kernel.org.
> Regards,
> Carl-Daniel
TIA
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
