No further issues were pointed out with this driver so I'd like to get
it included in the kernel.
Summary: Driver for ATI/Philips USB RF remotes
This is a new input driver for ATI/Philips USB RF remotes (eg. ATI
Remote Wonder II).
Signed-off-by: Ville Syrjälä <[EMAIL PROTECTED]>
---
Kconfig | 14 +
Makefile | 1
ati_remote2.c | 478 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 493 insertions(+)
diff -urpN linux-0/drivers/usb/input/ati_remote2.c
linux-1/drivers/usb/input/ati_remote2.c
--- linux-0/drivers/usb/input/ati_remote2.c 1970-01-01 02:00:00.000000000
+0200
+++ linux-1/drivers/usb/input/ati_remote2.c 2005-11-27 22:14:35.000000000
+0200
@@ -0,0 +1,478 @@
+/*
+ * ati_remote2 - ATI/Philips USB RF remote driver
+ *
+ * Copyright (C) 2005 Ville Syrjala <[EMAIL PROTECTED]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/usb_input.h>
+
+#define DRIVER_DESC "ATI/Philips USB RF remote driver"
+#define DRIVER_VERSION "0.1"
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_AUTHOR("Ville Syrjala <[EMAIL PROTECTED]>");
+MODULE_LICENSE("GPL");
+
+static unsigned int mode_mask = 0x1F;
+module_param(mode_mask, uint, 0644);
+MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept
<4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>");
+
+static struct usb_device_id ati_remote2_id_table[] = {
+ { USB_DEVICE(0x0471, 0x0602) }, /* ATI Remote Wonder II */
+ { }
+};
+MODULE_DEVICE_TABLE(usb, ati_remote2_id_table);
+
+static struct {
+ int hw_code;
+ int key_code;
+} ati_remote2_key_table[] = {
+ { 0x00, KEY_0 },
+ { 0x01, KEY_1 },
+ { 0x02, KEY_2 },
+ { 0x03, KEY_3 },
+ { 0x04, KEY_4 },
+ { 0x05, KEY_5 },
+ { 0x06, KEY_6 },
+ { 0x07, KEY_7 },
+ { 0x08, KEY_8 },
+ { 0x09, KEY_9 },
+ { 0x0c, KEY_POWER },
+ { 0x0d, KEY_MUTE },
+ { 0x10, KEY_VOLUMEUP },
+ { 0x11, KEY_VOLUMEDOWN },
+ { 0x20, KEY_CHANNELUP },
+ { 0x21, KEY_CHANNELDOWN },
+ { 0x28, KEY_FORWARD },
+ { 0x29, KEY_REWIND },
+ { 0x2c, KEY_PLAY },
+ { 0x30, KEY_PAUSE },
+ { 0x31, KEY_STOP },
+ { 0x37, KEY_RECORD },
+ { 0x38, KEY_DVD },
+ { 0x39, KEY_TV },
+ { 0x54, KEY_MENU },
+ { 0x58, KEY_UP },
+ { 0x59, KEY_DOWN },
+ { 0x5a, KEY_LEFT },
+ { 0x5b, KEY_RIGHT },
+ { 0x5c, KEY_OK },
+ { 0x78, KEY_A },
+ { 0x79, KEY_B },
+ { 0x7a, KEY_C },
+ { 0x7b, KEY_D },
+ { 0x7c, KEY_E },
+ { 0x7d, KEY_F },
+ { 0x82, KEY_ENTER },
+ { 0x8e, KEY_VENDOR },
+ { 0x96, KEY_COFFEE },
+ { 0xa9, BTN_LEFT },
+ { 0xaa, BTN_RIGHT },
+ { 0xbe, KEY_QUESTION },
+ { 0xd5, KEY_FRONT },
+ { 0xd0, KEY_EDIT },
+ { 0xf9, KEY_INFO },
+ { (0x00 << 8) | 0x3f, KEY_PROG1 },
+ { (0x01 << 8) | 0x3f, KEY_PROG2 },
+ { (0x02 << 8) | 0x3f, KEY_PROG3 },
+ { (0x03 << 8) | 0x3f, KEY_PROG4 },
+ { (0x04 << 8) | 0x3f, KEY_PC },
+ { 0, KEY_RESERVED }
+};
+
+struct ati_remote2 {
+ struct input_dev *idev;
+ struct usb_device *udev;
+
+ struct usb_interface *intf[2];
+ struct usb_endpoint_descriptor *ep[2];
+ struct urb *urb[2];
+ void *buf[2];
+ dma_addr_t buf_dma[2];
+
+ unsigned long jiffies;
+ int mode;
+
+ char name[64];
+ char phys[64];
+};
+
+static int ati_remote2_probe(struct usb_interface *interface, const struct
usb_device_id *id);
+static void ati_remote2_disconnect(struct usb_interface *interface);
+
+static struct usb_driver ati_remote2_driver = {
+ .owner = THIS_MODULE,
+ .name = "ati_remote2",
+ .probe = ati_remote2_probe,
+ .disconnect = ati_remote2_disconnect,
+ .id_table = ati_remote2_id_table,
+};
+
+static int ati_remote2_open(struct input_dev *idev)
+{
+ struct ati_remote2 *ar2 = idev->private;
+ int r;
+
+ r = usb_submit_urb(ar2->urb[0], GFP_KERNEL);
+ if (r) {
+ dev_err(&ar2->intf[0]->dev,
+ "%s: usb_submit_urb() = %d\n", __FUNCTION__, r);
+ return r;
+ }
+ r = usb_submit_urb(ar2->urb[1], GFP_KERNEL);
+ if (r) {
+ usb_kill_urb(ar2->urb[0]);
+ dev_err(&ar2->intf[1]->dev,
+ "%s: usb_submit_urb() = %d\n", __FUNCTION__, r);
+ return r;
+ }
+
+ return 0;
+}
+
+static void ati_remote2_close(struct input_dev *idev)
+{
+ struct ati_remote2 *ar2 = idev->private;
+
+ usb_kill_urb(ar2->urb[0]);
+ usb_kill_urb(ar2->urb[1]);
+}
+
+static void ati_remote2_input_mouse(struct ati_remote2 *ar2, struct pt_regs
*regs)
+{
+ struct input_dev *idev = ar2->idev;
+ u8 *data = ar2->buf[0];
+
+ if (data[0] > 4) {
+ dev_err(&ar2->intf[0]->dev,
+ "Unknown mode byte (%02x %02x %02x %02x)\n",
+ data[3], data[2], data[1], data[0]);
+ return;
+ }
+
+ if (!((1 << data[0]) & mode_mask))
+ return;
+
+ input_regs(idev, regs);
+ input_event(idev, EV_REL, REL_X, (s8) data[1]);
+ input_event(idev, EV_REL, REL_Y, (s8) data[2]);
+ input_sync(idev);
+}
+
+static int ati_remote2_lookup(unsigned int hw_code)
+{
+ int i;
+
+ for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++)
+ if (ati_remote2_key_table[i].hw_code == hw_code)
+ return i;
+
+ return -1;
+}
+
+static void ati_remote2_input_key(struct ati_remote2 *ar2, struct pt_regs
*regs)
+{
+ struct input_dev *idev = ar2->idev;
+ u8 *data = ar2->buf[1];
+ int hw_code, index;
+
+ if (data[0] > 4) {
+ dev_err(&ar2->intf[1]->dev,
+ "Unknown mode byte (%02x %02x %02x %02x)\n",
+ data[3], data[2], data[1], data[0]);
+ return;
+ }
+
+ hw_code = data[2];
+ /*
+ * Mode keys (AUX1-AUX4, PC) all generate the same code byte.
+ * Use the mode byte to figure out which one was pressed.
+ */
+ if (hw_code == 0x3f) {
+ /*
+ * For some incomprehensible reason the mouse pad generates
+ * events which look identical to the events from the last
+ * pressed mode key. Naturally we don't want to generate key
+ * events for the mouse pad so we filter out any subsequent
+ * events from the same mode key.
+ */
+ if (ar2->mode == data[0])
+ return;
+
+ if (data[1] == 0)
+ ar2->mode = data[0];
+
+ hw_code |= data[0] << 8;
+ }
+
+ if (!((1 << data[0]) & mode_mask))
+ return;
+
+ index = ati_remote2_lookup(hw_code);
+ if (index < 0) {
+ dev_err(&ar2->intf[1]->dev,
+ "Unknown code byte (%02x %02x %02x %02x)\n",
+ data[3], data[2], data[1], data[0]);
+ return;
+ }
+
+ switch (data[1]) {
+ case 0: /* release */
+ break;
+ case 1: /* press */
+ ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]);
+ break;
+ case 2: /* repeat */
+
+ /* No repeat for mouse buttons. */
+ if (ati_remote2_key_table[index].key_code == BTN_LEFT ||
+ ati_remote2_key_table[index].key_code == BTN_RIGHT)
+ return;
+
+ if (!time_after_eq(jiffies, ar2->jiffies))
+ return;
+
+ ar2->jiffies = jiffies +
msecs_to_jiffies(idev->rep[REP_PERIOD]);
+ break;
+ default:
+ dev_err(&ar2->intf[1]->dev,
+ "Unknown state byte (%02x %02x %02x %02x)\n",
+ data[3], data[2], data[1], data[0]);
+ return;
+ }
+
+ input_regs(idev, regs);
+ input_event(idev, EV_KEY, ati_remote2_key_table[index].key_code,
data[1]);
+ input_sync(idev);
+}
+
+static void ati_remote2_complete_mouse(struct urb *urb, struct pt_regs *regs)
+{
+ struct ati_remote2 *ar2 = urb->context;
+ int r;
+
+ switch (urb->status) {
+ case 0:
+ ati_remote2_input_mouse(ar2, regs);
+ break;
+ case -ENOENT:
+ case -EILSEQ:
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ dev_dbg(&ar2->intf[0]->dev,
+ "%s(): urb status = %d\n", __FUNCTION__, urb->status);
+ return;
+ default:
+ dev_err(&ar2->intf[0]->dev,
+ "%s(): urb status = %d\n", __FUNCTION__, urb->status);
+ }
+
+ r = usb_submit_urb(urb, GFP_ATOMIC);
+ if (r)
+ dev_err(&ar2->intf[0]->dev,
+ "%s(): usb_submit_urb() = %d\n", __FUNCTION__, r);
+}
+
+static void ati_remote2_complete_key(struct urb *urb, struct pt_regs *regs)
+{
+ struct ati_remote2 *ar2 = urb->context;
+ int r;
+
+ switch (urb->status) {
+ case 0:
+ ati_remote2_input_key(ar2, regs);
+ break;
+ case -ENOENT:
+ case -EILSEQ:
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ dev_dbg(&ar2->intf[1]->dev,
+ "%s(): urb status = %d\n", __FUNCTION__, urb->status);
+ return;
+ default:
+ dev_err(&ar2->intf[1]->dev,
+ "%s(): urb status = %d\n", __FUNCTION__, urb->status);
+ }
+
+ r = usb_submit_urb(urb, GFP_ATOMIC);
+ if (r)
+ dev_err(&ar2->intf[1]->dev,
+ "%s(): usb_submit_urb() = %d\n", __FUNCTION__, r);
+}
+
+static int ati_remote2_input_init(struct ati_remote2 *ar2)
+{
+ struct input_dev *idev;
+ int i;
+
+ idev = input_allocate_device();
+ if (!idev)
+ return -ENOMEM;
+
+ ar2->idev = idev;
+ idev->private = ar2;
+
+ idev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP) | BIT(EV_REL);
+ idev->keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT);
+ idev->relbit[0] = BIT(REL_X) | BIT(REL_Y);
+ for (i = 0; ati_remote2_key_table[i].key_code != KEY_RESERVED; i++)
+ set_bit(ati_remote2_key_table[i].key_code, idev->keybit);
+
+ idev->rep[REP_DELAY] = 250;
+ idev->rep[REP_PERIOD] = 33;
+
+ idev->open = ati_remote2_open;
+ idev->close = ati_remote2_close;
+
+ idev->name = ar2->name;
+ idev->phys = ar2->phys;
+
+ usb_to_input_id(ar2->udev, &idev->id);
+ idev->cdev.dev = &ar2->udev->dev;
+
+ i = input_register_device(idev);
+ if (i)
+ input_free_device(idev);
+
+ return i;
+}
+
+static int ati_remote2_urb_init(struct ati_remote2 *ar2)
+{
+ struct usb_device *udev = ar2->udev;
+ int i, pipe, maxp;
+
+ for (i = 0; i < 2; i++) {
+ ar2->buf[i] = usb_buffer_alloc(udev, 4, GFP_KERNEL,
&ar2->buf_dma[i]);
+ if (!ar2->buf[i])
+ return -ENOMEM;
+
+ ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL);
+ if (!ar2->urb[i])
+ return -ENOMEM;
+
+ pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress);
+ maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
+ maxp = maxp > 4 ? 4 : maxp;
+
+ usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp,
+ i ? ati_remote2_complete_key :
ati_remote2_complete_mouse,
+ ar2, ar2->ep[i]->bInterval);
+ ar2->urb[i]->transfer_dma = ar2->buf_dma[i];
+ ar2->urb[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ }
+
+ return 0;
+}
+
+static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2)
+{
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ if (ar2->urb[i])
+ usb_free_urb(ar2->urb[i]);
+
+ if (ar2->buf[i])
+ usb_buffer_free(ar2->udev, 4, ar2->buf[i],
ar2->buf_dma[i]);
+ }
+}
+
+static int ati_remote2_probe(struct usb_interface *interface, const struct
usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(interface);
+ struct usb_host_interface *alt = interface->cur_altsetting;
+ struct ati_remote2 *ar2;
+ int r;
+
+ if (alt->desc.bInterfaceNumber)
+ return -ENODEV;
+
+ ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL);
+ if (!ar2)
+ return -ENOMEM;
+
+ ar2->udev = udev;
+
+ ar2->intf[0] = interface;
+ ar2->ep[0] = &alt->endpoint[0].desc;
+
+ ar2->intf[1] = usb_ifnum_to_if(udev, 1);
+ r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2);
+ if (r)
+ goto fail1;
+ alt = ar2->intf[1]->cur_altsetting;
+ ar2->ep[1] = &alt->endpoint[0].desc;
+
+ r = ati_remote2_urb_init(ar2);
+ if (r)
+ goto fail2;
+
+ usb_make_path(udev, ar2->phys, sizeof(ar2->phys));
+ strlcat(ar2->phys, "/input0", sizeof(ar2->phys));
+
+ strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name));
+
+ r = ati_remote2_input_init(ar2);
+ if (r)
+ goto fail2;
+
+ usb_set_intfdata(interface, ar2);
+
+ return 0;
+
+ fail2:
+ ati_remote2_urb_cleanup(ar2);
+
+ usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
+ fail1:
+ kfree(ar2);
+
+ return r;
+}
+
+static void ati_remote2_disconnect(struct usb_interface *interface)
+{
+ struct ati_remote2 *ar2;
+ struct usb_host_interface *alt = interface->cur_altsetting;
+
+ if (alt->desc.bInterfaceNumber)
+ return;
+
+ ar2 = usb_get_intfdata(interface);
+ usb_set_intfdata(interface, NULL);
+
+ input_unregister_device(ar2->idev);
+
+ ati_remote2_urb_cleanup(ar2);
+
+ usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
+
+ kfree(ar2);
+}
+
+static int __init ati_remote2_init(void)
+{
+ int r;
+
+ r = usb_register(&ati_remote2_driver);
+ if (r)
+ printk(KERN_ERR "ati_remote2: usb_register() = %d\n", r);
+ else
+ printk(KERN_INFO "ati_remote2: " DRIVER_DESC " " DRIVER_VERSION
"\n");
+
+ return r;
+}
+
+static void __exit ati_remote2_exit(void)
+{
+ usb_deregister(&ati_remote2_driver);
+}
+
+module_init(ati_remote2_init);
+module_exit(ati_remote2_exit);
diff -urpN linux-0/drivers/usb/input/Kconfig linux-1/drivers/usb/input/Kconfig
--- linux-0/drivers/usb/input/Kconfig 2005-11-26 16:44:24.000000000 +0200
+++ linux-1/drivers/usb/input/Kconfig 2005-11-26 16:49:26.000000000 +0200
@@ -273,6 +273,20 @@ config USB_ATI_REMOTE
To compile this driver as a module, choose M here: the module will be
called ati_remote.
+config USB_ATI_REMOTE2
+ tristate "ATI / Philips USB RF remote control"
+ depends on USB && INPUT
+ ---help---
+ Say Y here if you want to use an ATI or Philips USB RF remote control.
+ These are RF remotes with USB receivers.
+ ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards
+ and is also available as a separate product.
+ This driver provides mouse pointer, left and right mouse buttons,
+ and maps all the other remote buttons to keypress events.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ati_remote2.
+
config USB_KEYSPAN_REMOTE
tristate "Keyspan DMR USB remote control (EXPERIMENTAL)"
depends on USB && INPUT && EXPERIMENTAL
diff -urpN linux-0/drivers/usb/input/Makefile linux-1/drivers/usb/input/Makefile
--- linux-0/drivers/usb/input/Makefile 2005-11-26 16:44:30.000000000 +0200
+++ linux-1/drivers/usb/input/Makefile 2005-11-26 17:09:27.000000000 +0200
@@ -28,6 +28,7 @@ endif
obj-$(CONFIG_USB_AIPTEK) += aiptek.o
obj-$(CONFIG_USB_ATI_REMOTE) += ati_remote.o
+obj-$(CONFIG_USB_ATI_REMOTE2) += ati_remote2.o
obj-$(CONFIG_USB_HID) += usbhid.o
obj-$(CONFIG_USB_KBD) += usbkbd.o
obj-$(CONFIG_USB_KBTAB) += kbtab.o
--
Ville Syrjälä
[EMAIL PROTECTED]
http://www.sci.fi/~syrjala/
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_idv37&alloc_id865&op=click
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
