hello,
I bought a lacie disk (LaCie d2 Hard Drive Extreme with Triple Interface
-> http://www.lacie.com/fr/products/product.htm?pid=10511) two years ago
and i used it with firewire 400 without problems until now.
But it doesn't work on linux with usb. The dmesg log is :
usb 1-1: new full speed USB device using ohci_hcd and address 6
usb 1-1: device descriptor read/64, error -110
usb 1-1: device descriptor read/64, error -110
usb 1-1: new full speed USB device using ohci_hcd and address 8
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 8
usb-storage: waiting for device to settle before scanning
Vendor: WDC WD16 Model: 00BB-00FTA0 Rev: 15.0
Type: Direct-Access ANSI SCSI revision: 04
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: assuming drive cache: write through
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: assuming drive cache: write through
/dev/scsi/host2/bus0/target0/lun0: p1
Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
usb 1-1: reset full speed USB device using ohci_hcd and address 8
usb 1-1: scsi_eh_2 timed out on ep0in
usb 1-1: device descriptor read/64, error -110
usb 1-1: scsi_eh_2 timed out on ep0in
usb 1-1: device descriptor read/64, error -110
usb 1-1: reset full speed USB device using ohci_hcd and address 8
usb 1-1: scsi_eh_2 timed out on ep0in
usb 1-1: device descriptor read/64, error -110
usb 1-1: scsi_eh_2 timed out on ep0in
usb 1-1: device descriptor read/64, error -110
scsi: Device offlined - not ready after error recovery: host 2 channel 0
id 0 lun 0
scsi2 (0:0): rejecting I/O to offline device
Buffer I/O error on device sda, logical block 0
Buffer I/O error on device sda, logical block 1
Buffer I/O error on device sda, logical block 2
Buffer I/O error on device sda, logical block 3
Buffer I/O error on device sda, logical block 4
Buffer I/O error on device sda, logical block 5
Buffer I/O error on device sda, logical block 6
Buffer I/O error on device sda, logical block 7
usb 1-1: USB disconnect, address 8
scsi2 (0:0): rejecting I/O to offline device
Buffer I/O error on device sda, logical block 0
scsi2 (0:0): rejecting I/O to offline device
Buffer I/O error on device sda, logical block 64
scsi2 (0:0): rejecting I/O to offline device
Buffer I/O error on device sda, logical block 64
usb-storage: device scan complete
usb 1-1: new full speed USB device using ohci_hcd and address 9
usb 1-1: khubd timed out on ep0in
usb 1-1: device descriptor read/64, error -110
usb 1-1: khubd timed out on ep0in
usb 1-1: device descriptor read/64, error -110
usb 1-1: new full speed USB device using ohci_hcd and address 10
usb 1-1: khubd timed out on ep0in
usb 1-1: device descriptor read/64, error -110
usb 1-1: khubd timed out on ep0in
usb 1-1: device descriptor read/64, error -110
To fix it I upgraded the firmware (under windows XP
http://www.lacie.com/fr/support/drivers/ ). But now, nothing work under
linux, even the firewire.
and now I can't use it on linux.
fabien M.
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
