[PATCH] USB: drivers/usb/storage/libusual
This patch adds a shim driver libusual, which routes devices between
usb-storage and ub according to the common table, based on unusual_devs.h.
The help and example syntax is in Kconfig.
Signed-off-by: Pete Zaitcev <[EMAIL PROTECTED]>
Signed-off-by: Greg Kroah-Hartman <[EMAIL PROTECTED]>
---
commit a00828e9ac62caed7b830d631914d7748817ccd1
tree 2fed4c66762fa4f54945413b4027ff5837ad0633
parent 1c50c317e2e7f15427149cbc216a63366468710e
author Pete Zaitcev <[EMAIL PROTECTED]> Sat, 22 Oct 2005 20:15:09 -0700
committer Greg Kroah-Hartman <[EMAIL PROTECTED]> Wed, 04 Jan 2006 13:48:31 -0800
drivers/block/Kconfig | 3
drivers/block/ub.c | 23 ++-
drivers/usb/Makefile | 1
drivers/usb/storage/Kconfig | 14 ++
drivers/usb/storage/Makefile | 4 +
drivers/usb/storage/libusual.c | 266 ++++++++++++++++++++++++++++++++++++
drivers/usb/storage/protocol.h | 14 --
drivers/usb/storage/transport.h | 31 ----
drivers/usb/storage/unusual_devs.h | 24 +++
drivers/usb/storage/usb.c | 119 +++++-----------
drivers/usb/storage/usb.h | 31 ----
include/linux/usb_usual.h | 123 +++++++++++++++++
12 files changed, 486 insertions(+), 167 deletions(-)
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 7b1cd93..c4b9d2a 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -358,7 +358,8 @@ config BLK_DEV_UB
This driver supports certain USB attached storage devices
such as flash keys.
- Warning: Enabling this cripples the usb-storage driver.
+ If you enable this driver, it is recommended to avoid conflicts
+ with usb-storage by enabling USB_LIBUSUAL.
If unsure, say N.
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index bfb23d5..06d741d 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -29,6 +29,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/usb.h>
+#include <linux/usb_usual.h>
#include <linux/blkdev.h>
#include <linux/devfs_fs_kernel.h>
#include <linux/timer.h>
@@ -107,16 +108,6 @@
*/
/*
- * Definitions which have to be scattered once we understand the layout better.
- */
-
-/* Transport (despite PR in the name) */
-#define US_PR_BULK 0x50 /* bulk only */
-
-/* Protocol */
-#define US_SC_SCSI 0x06 /* Transparent */
-
-/*
* This many LUNs per USB device.
* Every one of them takes a host, see UB_MAX_HOSTS.
*/
@@ -422,13 +413,18 @@ static int ub_probe_lun(struct ub_dev *s
/*
*/
+#ifdef CONFIG_USB_LIBUSUAL
+
+#define ub_usb_ids storage_usb_ids
+#else
+
static struct usb_device_id ub_usb_ids[] = {
- // { USB_DEVICE_VER(0x0781, 0x0002, 0x0009, 0x0009) }, /* SDDR-31 */
{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_BULK) },
{ }
};
MODULE_DEVICE_TABLE(usb, ub_usb_ids);
+#endif /* CONFIG_USB_LIBUSUAL */
/*
* Find me a way to identify "next free minor" for add_disk(),
@@ -2172,6 +2168,9 @@ static int ub_probe(struct usb_interface
int rc;
int i;
+ if (usb_usual_check_type(dev_id, USB_US_TYPE_UB))
+ return -ENXIO;
+
rc = -ENOMEM;
if ((sc = kmalloc(sizeof(struct ub_dev), GFP_KERNEL)) == NULL)
goto err_core;
@@ -2479,6 +2478,7 @@ static int __init ub_init(void)
if ((rc = usb_register(&ub_driver)) != 0)
goto err_register;
+ usb_usual_set_present(USB_US_TYPE_UB);
return 0;
err_register:
@@ -2494,6 +2494,7 @@ static void __exit ub_exit(void)
devfs_remove(DEVFS_NAME);
unregister_blkdev(UB_MAJOR, DRV_NAME);
+ usb_usual_clear_present(USB_US_TYPE_UB);
}
module_init(ub_init);
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index a50c2bc..3639c3f 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_USB_MIDI) += class/
obj-$(CONFIG_USB_PRINTER) += class/
obj-$(CONFIG_USB_STORAGE) += storage/
+obj-$(CONFIG_USB) += storage/
obj-$(CONFIG_USB_AIPTEK) += input/
obj-$(CONFIG_USB_ATI_REMOTE) += input/
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index c41d64d..bdfcb95 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -124,3 +124,17 @@ config USB_STORAGE_ONETOUCH
hard drive's as an input device. An action can be associated with
this input in any keybinding software. (e.g. gnome's keyboard short-
cuts)
+
+config USB_LIBUSUAL
+ bool "The shared table of common (or usual) storage devices"
+ depends on USB
+ help
+ This module contains a table of common (or usual) devices
+ for usb-storage and ub drivers, and allows to switch binding
+ of these devices without rebuilding modules.
+
+ Typical syntax of /etc/modprobe.conf is:
+
+ options libusual bias="ub"
+
+ If unsure, say N.
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index 44ab8f9..2d416e9 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -22,3 +22,7 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_ONE
usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \
initializers.o $(usb-storage-obj-y)
+
+ifneq ($(CONFIG_USB_LIBUSUAL),)
+ obj-$(CONFIG_USB) += libusual.o
+endif
diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c
new file mode 100644
index 0000000..61f73d8
--- /dev/null
+++ b/drivers/usb/storage/libusual.c
@@ -0,0 +1,266 @@
+/*
+ * libusual
+ *
+ * The libusual contains the table of devices common for ub and usb-storage.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb_usual.h>
+#include <linux/vmalloc.h>
+
+/*
+ */
+#define USU_MOD_FL_THREAD 1 /* Thread is running */
+#define USU_MOD_FL_PRESENT 2 /* The module is loaded */
+
+struct mod_status {
+ unsigned long fls;
+};
+
+static struct mod_status stat[3];
+static DEFINE_SPINLOCK(usu_lock);
+
+/*
+ */
+#define USB_US_DEFAULT_BIAS USB_US_TYPE_STOR
+
+#define BIAS_NAME_SIZE (sizeof("usb-storage"))
+static char bias[BIAS_NAME_SIZE];
+static int usb_usual_bias;
+static const char *bias_names[3] = { "none", "usb-storage", "ub" };
+
+static DECLARE_MUTEX_LOCKED(usu_init_notify);
+static DECLARE_COMPLETION(usu_end_notify);
+static atomic_t total_threads = ATOMIC_INIT(0);
+
+static int usu_probe_thread(void *arg);
+static int parse_bias(const char *bias_s);
+
+/*
+ * The table.
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+ vendorName, productName,useProtocol, useTransport, \
+ initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \
+ .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+#define USUAL_DEV(useProto, useTrans, useType) \
+{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
+ .driver_info = ((useType)<<24) }
+
+struct usb_device_id storage_usb_ids [] = {
+# include "unusual_devs.h"
+ { } /* Terminating entry */
+};
+
+#undef USUAL_DEV
+#undef UNUSUAL_DEV
+
+MODULE_DEVICE_TABLE(usb, storage_usb_ids);
+EXPORT_SYMBOL_GPL(storage_usb_ids);
+
+/*
+ * @type: the module type as an integer
+ */
+void usb_usual_set_present(int type)
+{
+ struct mod_status *st;
+ unsigned long flags;
+
+ if (type <= 0 || type >= 3)
+ return;
+ st = &stat[type];
+ spin_lock_irqsave(&usu_lock, flags);
+ st->fls |= USU_MOD_FL_PRESENT;
+ spin_unlock_irqrestore(&usu_lock, flags);
+}
+EXPORT_SYMBOL_GPL(usb_usual_set_present);
+
+void usb_usual_clear_present(int type)
+{
+ struct mod_status *st;
+ unsigned long flags;
+
+ if (type <= 0 || type >= 3)
+ return;
+ st = &stat[type];
+ spin_lock_irqsave(&usu_lock, flags);
+ st->fls &= ~USU_MOD_FL_PRESENT;
+ spin_unlock_irqrestore(&usu_lock, flags);
+}
+EXPORT_SYMBOL_GPL(usb_usual_clear_present);
+
+/*
+ * Match the calling driver type against the table.
+ * Returns: 0 if the device matches.
+ */
+int usb_usual_check_type(const struct usb_device_id *id, int caller_type)
+{
+ int id_type = USB_US_TYPE(id->driver_info);
+
+ if (caller_type <= 0 || caller_type >= 3)
+ return -EINVAL;
+
+ /* Drivers grab fixed assignment devices */
+ if (id_type == caller_type)
+ return 0;
+ /* Drivers grab devices biased to them */
+ if (id_type == USB_US_TYPE_NONE && caller_type == usb_usual_bias)
+ return 0;
+ return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(usb_usual_check_type);
+
+/*
+ */
+static int usu_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ int type;
+ int rc;
+ unsigned long flags;
+
+ type = USB_US_TYPE(id->driver_info);
+ if (type == 0)
+ type = usb_usual_bias;
+
+ spin_lock_irqsave(&usu_lock, flags);
+ if ((stat[type].fls & (USU_MOD_FL_THREAD|USU_MOD_FL_PRESENT)) != 0) {
+ spin_unlock_irqrestore(&usu_lock, flags);
+ return -ENXIO;
+ }
+ stat[type].fls |= USU_MOD_FL_THREAD;
+ spin_unlock_irqrestore(&usu_lock, flags);
+
+ rc = kernel_thread(usu_probe_thread, (void*)type, CLONE_VM);
+ if (rc < 0) {
+ printk(KERN_WARNING "libusual: "
+ "Unable to start the thread for %s: %d\n",
+ bias_names[type], rc);
+ spin_lock_irqsave(&usu_lock, flags);
+ stat[type].fls &= ~USU_MOD_FL_THREAD;
+ spin_unlock_irqrestore(&usu_lock, flags);
+ return rc; /* Not being -ENXIO causes a message printed */
+ }
+ atomic_inc(&total_threads);
+
+ return -ENXIO;
+}
+
+static void usu_disconnect(struct usb_interface *intf)
+{
+ ; /* We should not be here. */
+}
+
+static struct usb_driver usu_driver = {
+ .owner = THIS_MODULE,
+ .name = "libusual",
+ .probe = usu_probe,
+ .disconnect = usu_disconnect,
+ .id_table = storage_usb_ids,
+};
+
+/*
+ * A whole new thread for a purpose of request_module seems quite stupid.
+ * The request_module forks once inside again. However, if we attempt
+ * to load a storage module from our own modprobe thread, that module
+ * references our symbols, which cannot be resolved until our module is
+ * initialized. I wish there was a way to wait for the end of initialization.
+ * The module notifier reports MODULE_STATE_COMING only.
+ * So, we wait until module->init ends as the next best thing.
+ */
+static int usu_probe_thread(void *arg)
+{
+ int type = (unsigned long) arg;
+ struct mod_status *st = &stat[type];
+ int rc;
+ unsigned long flags;
+
+ daemonize("libusual_%d", type); /* "usb-storage" is kinda too long */
+
+ /* A completion does not work here because it's counted. */
+ down(&usu_init_notify);
+ up(&usu_init_notify);
+
+ rc = request_module(bias_names[type]);
+ spin_lock_irqsave(&usu_lock, flags);
+ if (rc == 0 && (st->fls & USU_MOD_FL_PRESENT) == 0) {
+ /*
+ * This should not happen, but let us keep tabs on it.
+ */
+ printk(KERN_NOTICE "libusual: "
+ "modprobe for %s succeeded, but module is not present\n",
+ bias_names[type]);
+ }
+ st->fls &= ~USU_MOD_FL_THREAD;
+ spin_unlock_irqrestore(&usu_lock, flags);
+
+ complete_and_exit(&usu_end_notify, 0);
+}
+
+/*
+ */
+static int __init usb_usual_init(void)
+{
+ int rc;
+
+ bias[BIAS_NAME_SIZE-1] = 0;
+ usb_usual_bias = parse_bias(bias);
+
+ rc = usb_register(&usu_driver);
+ up(&usu_init_notify);
+ return rc;
+}
+
+static void __exit usb_usual_exit(void)
+{
+ /*
+ * We do not check for any drivers present, because
+ * they keep us pinned with symbol references.
+ */
+
+ usb_deregister(&usu_driver);
+
+ while (atomic_read(&total_threads) > 0) {
+ wait_for_completion(&usu_end_notify);
+ atomic_dec(&total_threads);
+ }
+}
+
+/*
+ * Validate and accept the bias parameter.
+ * Maybe make an sysfs method later. XXX
+ */
+static int parse_bias(const char *bias_s)
+{
+ int i;
+ int bias_n = 0;
+
+ if (bias_s[0] == 0 || bias_s[0] == ' ') {
+ bias_n = USB_US_DEFAULT_BIAS;
+ } else {
+ for (i = 1; i < 3; i++) {
+ if (strcmp(bias_s, bias_names[i]) == 0) {
+ bias_n = i;
+ break;
+ }
+ }
+ if (bias_n == 0) {
+ bias_n = USB_US_DEFAULT_BIAS;
+ printk(KERN_INFO
+ "libusual: unknown bias \"%s\", using \"%s\"\n",
+ bias_s, bias_names[bias_n]);
+ }
+ }
+ return bias_n;
+}
+
+module_init(usb_usual_init);
+module_exit(usb_usual_exit);
+
+module_param_string(bias, bias, BIAS_NAME_SIZE, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(bias, "Bias to usb-storage or ub");
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/storage/protocol.h b/drivers/usb/storage/protocol.h
index 02bff01..845bed4 100644
--- a/drivers/usb/storage/protocol.h
+++ b/drivers/usb/storage/protocol.h
@@ -41,20 +41,6 @@
#ifndef _PROTOCOL_H_
#define _PROTOCOL_H_
-/* Sub Classes */
-
-#define US_SC_RBC 0x01 /* Typically, flash devices */
-#define US_SC_8020 0x02 /* CD-ROM */
-#define US_SC_QIC 0x03 /* QIC-157 Tapes */
-#define US_SC_UFI 0x04 /* Floppy */
-#define US_SC_8070 0x05 /* Removable media */
-#define US_SC_SCSI 0x06 /* Transparent */
-#define US_SC_ISD200 0x07 /* ISD200 ATA */
-#define US_SC_MIN US_SC_RBC
-#define US_SC_MAX US_SC_ISD200
-
-#define US_SC_DEVICE 0xff /* Use device's value */
-
/* Protocol handling routines */
extern void usb_stor_ATAPI_command(struct scsi_cmnd*, struct us_data*);
extern void usb_stor_qic157_command(struct scsi_cmnd*, struct us_data*);
diff --git a/drivers/usb/storage/transport.h b/drivers/usb/storage/transport.h
index 0a362cc..633a715 100644
--- a/drivers/usb/storage/transport.h
+++ b/drivers/usb/storage/transport.h
@@ -41,39 +41,8 @@
#ifndef _TRANSPORT_H_
#define _TRANSPORT_H_
-#include <linux/config.h>
#include <linux/blkdev.h>
-/* Protocols */
-
-#define US_PR_CBI 0x00 /* Control/Bulk/Interrupt */
-#define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */
-#define US_PR_BULK 0x50 /* bulk only */
-#ifdef CONFIG_USB_STORAGE_USBAT
-#define US_PR_USBAT 0x80 /* SCM-ATAPI bridge */
-#endif
-#ifdef CONFIG_USB_STORAGE_SDDR09
-#define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */
-#endif
-#ifdef CONFIG_USB_STORAGE_SDDR55
-#define US_PR_SDDR55 0x82 /* SDDR-55 (made up) */
-#endif
-#define US_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */
-
-#ifdef CONFIG_USB_STORAGE_FREECOM
-#define US_PR_FREECOM 0xf1 /* Freecom */
-#endif
-
-#ifdef CONFIG_USB_STORAGE_DATAFAB
-#define US_PR_DATAFAB 0xf2 /* Datafab chipsets */
-#endif
-
-#ifdef CONFIG_USB_STORAGE_JUMPSHOT
-#define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */
-#endif
-
-#define US_PR_DEVICE 0xff /* Use device's value */
-
/*
* Bulk only data structures
*/
diff --git a/drivers/usb/storage/unusual_devs.h
b/drivers/usb/storage/unusual_devs.h
index f5f47a3..76904ad 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1134,3 +1134,27 @@ UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x
US_SC_SCSI, US_PR_SDDR55, NULL,
US_FL_SINGLE_LUN),
#endif
+
+/* Control/Bulk transport for all SubClass values */
+USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_QIC, US_PR_CB, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_UFI, US_PR_CB, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_8070, US_PR_CB, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_SCSI, US_PR_CB, USB_US_TYPE_STOR),
+
+/* Control/Bulk/Interrupt transport for all SubClass values */
+USUAL_DEV(US_SC_RBC, US_PR_CBI, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_8020, US_PR_CBI, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_QIC, US_PR_CBI, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_UFI, US_PR_CBI, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_8070, US_PR_CBI, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_SCSI, US_PR_CBI, USB_US_TYPE_STOR),
+
+/* Bulk-only transport for all SubClass values */
+USUAL_DEV(US_SC_RBC, US_PR_BULK, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_8020, US_PR_BULK, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_QIC, US_PR_BULK, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_UFI, US_PR_BULK, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_8070, US_PR_BULK, USB_US_TYPE_STOR),
+USUAL_DEV(US_SC_SCSI, US_PR_BULK, 0),
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 3847ebe..c8375aa 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -112,49 +112,33 @@ static atomic_t total_threads = ATOMIC_I
static DECLARE_COMPLETION(threads_gone);
-/* The entries in this table, except for final ones here
- * (USB_MASS_STORAGE_CLASS and the empty entry), correspond,
- * line for line with the entries of us_unsuaul_dev_list[].
+/*
+ * The entries in this table correspond, line for line,
+ * with the entries of us_unusual_dev_list[].
*/
+#ifndef CONFIG_USB_LIBUSUAL
#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
vendorName, productName,useProtocol, useTransport, \
initFunction, flags) \
-{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax) }
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \
+ .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+#define USUAL_DEV(useProto, useTrans, useType) \
+{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \
+ .driver_info = (USB_US_TYPE_STOR<<24) }
static struct usb_device_id storage_usb_ids [] = {
# include "unusual_devs.h"
#undef UNUSUAL_DEV
- /* Control/Bulk transport for all SubClass values */
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_CB) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_CB) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_CB) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_CB) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_CB) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_CB) },
-
- /* Control/Bulk/Interrupt transport for all SubClass values */
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_CBI) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_CBI) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_CBI) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_CBI) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_CBI) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_CBI) },
-
- /* Bulk-only transport for all SubClass values */
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_RBC, US_PR_BULK) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8020, US_PR_BULK) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_QIC, US_PR_BULK) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_UFI, US_PR_BULK) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_8070, US_PR_BULK) },
- { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_BULK) },
-
+#undef USUAL_DEV
/* Terminating entry */
{ }
};
MODULE_DEVICE_TABLE (usb, storage_usb_ids);
+#endif /* CONFIG_USB_LIBUSUAL */
/* This is the list of devices we recognize, along with their flag data */
@@ -167,7 +151,6 @@ MODULE_DEVICE_TABLE (usb, storage_usb_id
* are free to use as many characters as you like.
*/
-#undef UNUSUAL_DEV
#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
vendor_name, product_name, use_protocol, use_transport, \
init_function, Flags) \
@@ -177,53 +160,18 @@ MODULE_DEVICE_TABLE (usb, storage_usb_id
.useProtocol = use_protocol, \
.useTransport = use_transport, \
.initFunction = init_function, \
- .flags = Flags, \
+}
+
+#define USUAL_DEV(use_protocol, use_transport, use_type) \
+{ \
+ .useProtocol = use_protocol, \
+ .useTransport = use_transport, \
}
static struct us_unusual_dev us_unusual_dev_list[] = {
# include "unusual_devs.h"
# undef UNUSUAL_DEV
- /* Control/Bulk transport for all SubClass values */
- { .useProtocol = US_SC_RBC,
- .useTransport = US_PR_CB},
- { .useProtocol = US_SC_8020,
- .useTransport = US_PR_CB},
- { .useProtocol = US_SC_QIC,
- .useTransport = US_PR_CB},
- { .useProtocol = US_SC_UFI,
- .useTransport = US_PR_CB},
- { .useProtocol = US_SC_8070,
- .useTransport = US_PR_CB},
- { .useProtocol = US_SC_SCSI,
- .useTransport = US_PR_CB},
-
- /* Control/Bulk/Interrupt transport for all SubClass values */
- { .useProtocol = US_SC_RBC,
- .useTransport = US_PR_CBI},
- { .useProtocol = US_SC_8020,
- .useTransport = US_PR_CBI},
- { .useProtocol = US_SC_QIC,
- .useTransport = US_PR_CBI},
- { .useProtocol = US_SC_UFI,
- .useTransport = US_PR_CBI},
- { .useProtocol = US_SC_8070,
- .useTransport = US_PR_CBI},
- { .useProtocol = US_SC_SCSI,
- .useTransport = US_PR_CBI},
-
- /* Bulk-only transport for all SubClass values */
- { .useProtocol = US_SC_RBC,
- .useTransport = US_PR_BULK},
- { .useProtocol = US_SC_8020,
- .useTransport = US_PR_BULK},
- { .useProtocol = US_SC_QIC,
- .useTransport = US_PR_BULK},
- { .useProtocol = US_SC_UFI,
- .useTransport = US_PR_BULK},
- { .useProtocol = US_SC_8070,
- .useTransport = US_PR_BULK},
- { .useProtocol = US_SC_SCSI,
- .useTransport = US_PR_BULK},
+# undef USUAL_DEV
/* Terminating entry */
{ NULL }
@@ -484,14 +432,20 @@ static int associate_dev(struct us_data
return 0;
}
+/* Find an unusual_dev descriptor (always succeeds in the current code) */
+static struct us_unusual_dev *find_unusual(const struct usb_device_id *id)
+{
+ const int id_index = id - storage_usb_ids;
+ return &us_unusual_dev_list[id_index];
+}
+
/* Get the unusual_devs entries and the string descriptors */
-static void get_device_info(struct us_data *us, int id_index)
+static void get_device_info(struct us_data *us, const struct usb_device_id *id)
{
struct usb_device *dev = us->pusb_dev;
struct usb_interface_descriptor *idesc =
&us->pusb_intf->cur_altsetting->desc;
- struct us_unusual_dev *unusual_dev = &us_unusual_dev_list[id_index];
- struct usb_device_id *id = &storage_usb_ids[id_index];
+ struct us_unusual_dev *unusual_dev = find_unusual(id);
/* Store the entries */
us->unusual_dev = unusual_dev;
@@ -501,7 +455,7 @@ static void get_device_info(struct us_da
us->protocol = (unusual_dev->useTransport == US_PR_DEVICE) ?
idesc->bInterfaceProtocol :
unusual_dev->useTransport;
- us->flags = unusual_dev->flags;
+ us->flags = USB_US_ORIG_FLAGS(id->driver_info);
/*
* This flag is only needed when we're in high-speed, so let's
@@ -529,7 +483,7 @@ static void get_device_info(struct us_da
if (unusual_dev->useTransport != US_PR_DEVICE &&
us->protocol == idesc->bInterfaceProtocol)
msg += 2;
- if (msg >= 0 && !(unusual_dev->flags & US_FL_NEED_OVERRIDE))
+ if (msg >= 0 && !(us->flags & US_FL_NEED_OVERRIDE))
printk(KERN_NOTICE USB_STORAGE "This device "
"(%04x,%04x,%04x S %02x P %02x)"
" has %s in unusual_devs.h\n"
@@ -921,10 +875,12 @@ static int storage_probe(struct usb_inte
{
struct Scsi_Host *host;
struct us_data *us;
- const int id_index = id - storage_usb_ids;
int result;
struct task_struct *th;
+ if (usb_usual_check_type(id, USB_US_TYPE_STOR))
+ return -ENXIO;
+
US_DEBUGP("USB Mass Storage device detected\n");
/*
@@ -957,7 +913,7 @@ static int storage_probe(struct usb_inte
* of the match from the usb_device_id table, so we can find the
* corresponding entry in the private table.
*/
- get_device_info(us, id_index);
+ get_device_info(us, id);
#ifdef CONFIG_USB_STORAGE_SDDR09
if (us->protocol == US_PR_EUSB_SDDR09 ||
@@ -1062,9 +1018,10 @@ static int __init usb_stor_init(void)
/* register the driver, return usb_register return code if error */
retval = usb_register(&usb_storage_driver);
- if (retval == 0)
+ if (retval == 0) {
printk(KERN_INFO "USB Mass Storage support registered.\n");
-
+ usb_usual_set_present(USB_US_TYPE_STOR);
+ }
return retval;
}
@@ -1088,6 +1045,8 @@ static void __exit usb_stor_exit(void)
wait_for_completion(&threads_gone);
atomic_dec(&total_threads);
}
+
+ usb_usual_clear_present(USB_US_TYPE_STOR);
}
module_init(usb_stor_init);
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 98b0971..0cd1eeb 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -45,6 +45,7 @@
#define _USB_H_
#include <linux/usb.h>
+#include <linux/usb_usual.h>
#include <linux/blkdev.h>
#include <linux/smp_lock.h>
#include <linux/completion.h>
@@ -63,38 +64,8 @@ struct us_unusual_dev {
__u8 useProtocol;
__u8 useTransport;
int (*initFunction)(struct us_data *);
- unsigned int flags;
};
-/*
- * Static flag definitions. We use this roundabout technique so that the
- * proc_info() routine can automatically display a message for each flag.
- */
-#define US_DO_ALL_FLAGS \
- US_FLAG(SINGLE_LUN, 0x00000001) \
- /* allow access to only LUN 0 */ \
- US_FLAG(NEED_OVERRIDE, 0x00000002) \
- /* unusual_devs entry is necessary */ \
- US_FLAG(SCM_MULT_TARG, 0x00000004) \
- /* supports multiple targets */ \
- US_FLAG(FIX_INQUIRY, 0x00000008) \
- /* INQUIRY response needs faking */ \
- US_FLAG(FIX_CAPACITY, 0x00000010) \
- /* READ CAPACITY response too big */ \
- US_FLAG(IGNORE_RESIDUE, 0x00000020) \
- /* reported residue is wrong */ \
- US_FLAG(BULK32, 0x00000040) \
- /* Uses 32-byte CBW length */ \
- US_FLAG(NOT_LOCKABLE, 0x00000080) \
- /* PREVENT/ALLOW not supported */ \
- US_FLAG(GO_SLOW, 0x00000100) \
- /* Need delay after Command phase */ \
- US_FLAG(NO_WP_DETECT, 0x00000200) \
- /* Don't check for write-protect */ \
-
-#define US_FLAG(name, value) US_FL_##name = value ,
-enum { US_DO_ALL_FLAGS };
-#undef US_FLAG
/* Dynamic flag definitions: used in set_bit() etc. */
#define US_FLIDX_URB_ACTIVE 18 /* 0x00040000 current_urb is in use */
diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h
new file mode 100644
index 0000000..f9c058f
--- /dev/null
+++ b/include/linux/usb_usual.h
@@ -0,0 +1,123 @@
+/*
+ * Interface to the libusual.
+ *
+ * Copyright (c) 2005 Pete Zaitcev <[EMAIL PROTECTED]>
+ * Copyright (c) 1999-2002 Matthew Dharm ([EMAIL PROTECTED])
+ * Copyright (c) 1999 Michael Gee ([EMAIL PROTECTED])
+ */
+
+#ifndef __LINUX_USB_USUAL_H
+#define __LINUX_USB_USUAL_H
+
+#include <linux/config.h>
+
+/* We should do this for cleanliness... But other usb_foo.h do not do this. */
+/* #include <linux/usb.h> */
+
+/*
+ * The flags field, which we store in usb_device_id.driver_info.
+ * It is compatible with the old usb-storage flags in lower 24 bits.
+ */
+
+/*
+ * Static flag definitions. We use this roundabout technique so that the
+ * proc_info() routine can automatically display a message for each flag.
+ */
+#define US_DO_ALL_FLAGS \
+ US_FLAG(SINGLE_LUN, 0x00000001) \
+ /* allow access to only LUN 0 */ \
+ US_FLAG(NEED_OVERRIDE, 0x00000002) \
+ /* unusual_devs entry is necessary */ \
+ US_FLAG(SCM_MULT_TARG, 0x00000004) \
+ /* supports multiple targets */ \
+ US_FLAG(FIX_INQUIRY, 0x00000008) \
+ /* INQUIRY response needs faking */ \
+ US_FLAG(FIX_CAPACITY, 0x00000010) \
+ /* READ CAPACITY response too big */ \
+ US_FLAG(IGNORE_RESIDUE, 0x00000020) \
+ /* reported residue is wrong */ \
+ US_FLAG(BULK32, 0x00000040) \
+ /* Uses 32-byte CBW length */ \
+ US_FLAG(NOT_LOCKABLE, 0x00000080) \
+ /* PREVENT/ALLOW not supported */ \
+ US_FLAG(GO_SLOW, 0x00000100) \
+ /* Need delay after Command phase */ \
+ US_FLAG(NO_WP_DETECT, 0x00000200) \
+ /* Don't check for write-protect */ \
+
+#define US_FLAG(name, value) US_FL_##name = value ,
+enum { US_DO_ALL_FLAGS };
+#undef US_FLAG
+
+/*
+ * The bias field for libusual and friends.
+ */
+#define USB_US_TYPE_NONE 0
+#define USB_US_TYPE_STOR 1 /* usb-storage */
+#define USB_US_TYPE_UB 2 /* ub */
+
+#define USB_US_TYPE(flags) (((flags) >> 24) & 0xFF)
+#define USB_US_ORIG_FLAGS(flags) ((flags) & 0x00FFFFFF)
+
+/*
+ * This is probably not the best place to keep these constants, conceptually.
+ * But it's the only header included into all places which need them.
+ */
+
+/* Sub Classes */
+
+#define US_SC_RBC 0x01 /* Typically, flash devices */
+#define US_SC_8020 0x02 /* CD-ROM */
+#define US_SC_QIC 0x03 /* QIC-157 Tapes */
+#define US_SC_UFI 0x04 /* Floppy */
+#define US_SC_8070 0x05 /* Removable media */
+#define US_SC_SCSI 0x06 /* Transparent */
+#define US_SC_ISD200 0x07 /* ISD200 ATA */
+#define US_SC_MIN US_SC_RBC
+#define US_SC_MAX US_SC_ISD200
+
+#define US_SC_DEVICE 0xff /* Use device's value */
+
+/* Protocols */
+
+#define US_PR_CBI 0x00 /* Control/Bulk/Interrupt */
+#define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */
+#define US_PR_BULK 0x50 /* bulk only */
+#ifdef CONFIG_USB_STORAGE_USBAT
+#define US_PR_USBAT 0x80 /* SCM-ATAPI bridge */
+#endif
+#ifdef CONFIG_USB_STORAGE_SDDR09
+#define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */
+#endif
+#ifdef CONFIG_USB_STORAGE_SDDR55
+#define US_PR_SDDR55 0x82 /* SDDR-55 (made up) */
+#endif
+#define US_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */
+#ifdef CONFIG_USB_STORAGE_FREECOM
+#define US_PR_FREECOM 0xf1 /* Freecom */
+#endif
+#ifdef CONFIG_USB_STORAGE_DATAFAB
+#define US_PR_DATAFAB 0xf2 /* Datafab chipsets */
+#endif
+#ifdef CONFIG_USB_STORAGE_JUMPSHOT
+#define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */
+#endif
+
+#define US_PR_DEVICE 0xff /* Use device's value */
+
+/*
+ */
+#ifdef CONFIG_USB_LIBUSUAL
+
+extern struct usb_device_id storage_usb_ids[];
+extern void usb_usual_set_present(int type);
+extern void usb_usual_clear_present(int type);
+extern int usb_usual_check_type(const struct usb_device_id *, int type);
+#else
+
+#define usb_usual_set_present(t) do { } while(0)
+#define usb_usual_clear_present(t) do { } while(0)
+#define usb_usual_check_type(id, t) (0)
+#endif /* CONFIG_USB_LIBUSUAL */
+
+#endif /* __LINUX_USB_USUAL_H */
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_idv37&alloc_id865&op=click
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
