[PATCH] USB Storage: sddr09 cleanups
This is the second of three patches to prepare the sddr09 subdriver for
conversion to the Sim-SCSI framework. This patch (as595) updates the
code to use standard error values for return codes instead of our
special-purpose USB_STOR_TRANSPORT_... codes. The reverse update is
then needed in the transport routine, but with the Sim-SCSI framework
that routine will go away.
Signed-off-by: Alan Stern <[EMAIL PROTECTED]>
Acked-by: Andries Brouwer <[EMAIL PROTECTED]>
Signed-off-by: Matthew Dharm <[EMAIL PROTECTED]>
Signed-off-by: Greg Kroah-Hartman <[EMAIL PROTECTED]>
---
commit 0dc08a357538de3d93305fbf99348663abdbf2cd
tree d794f54e4ba52ef19e9817562f284736de216b14
parent f5b8cb9c91f2f7d54dc3f066db8d4e0f041de79b
author Matthew Dharm <[EMAIL PROTECTED]> Sun, 04 Dec 2005 21:58:52 -0800
committer Greg Kroah-Hartman <[EMAIL PROTECTED]> Wed, 04 Jan 2006 13:51:41 -0800
drivers/usb/storage/sddr09.c | 103 ++++++++++++++++++++----------------------
1 files changed, 50 insertions(+), 53 deletions(-)
diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
index 6c379b6..760fe93 100644
--- a/drivers/usb/storage/sddr09.c
+++ b/drivers/usb/storage/sddr09.c
@@ -274,8 +274,11 @@ sddr09_send_command(struct us_data *us,
rc = usb_stor_ctrl_transfer(us, pipe, request, requesttype,
0, 0, xfer_data, xfer_len);
- return (rc == USB_STOR_XFER_GOOD ? USB_STOR_TRANSPORT_GOOD :
- USB_STOR_TRANSPORT_ERROR);
+ switch (rc) {
+ case USB_STOR_XFER_GOOD: return 0;
+ case USB_STOR_XFER_STALLED: return -EPIPE;
+ default: return -EIO;
+ }
}
static int
@@ -322,20 +325,12 @@ sddr09_request_sense(struct us_data *us,
command[4] = buflen;
result = sddr09_send_scsi_command(us, command, 12);
- if (result != USB_STOR_TRANSPORT_GOOD) {
- US_DEBUGP("request sense failed\n");
+ if (result)
return result;
- }
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
sensebuf, buflen, NULL);
- if (result != USB_STOR_XFER_GOOD) {
- US_DEBUGP("request sense bulk in failed\n");
- return USB_STOR_TRANSPORT_ERROR;
- } else {
- US_DEBUGP("request sense worked\n");
- return USB_STOR_TRANSPORT_GOOD;
- }
+ return (result == USB_STOR_XFER_GOOD ? 0 : -EIO);
}
/*
@@ -383,7 +378,7 @@ sddr09_readX(struct us_data *us, int x,
result = sddr09_send_scsi_command(us, command, 12);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("Result for send_control in sddr09_read2%d %d\n",
x, result);
return result;
@@ -395,9 +390,9 @@ sddr09_readX(struct us_data *us, int x,
if (result != USB_STOR_XFER_GOOD) {
US_DEBUGP("Result for bulk_transfer in sddr09_read2%d %d\n",
x, result);
- return USB_STOR_TRANSPORT_ERROR;
+ return -EIO;
}
- return USB_STOR_TRANSPORT_GOOD;
+ return 0;
}
/*
@@ -511,7 +506,7 @@ sddr09_erase(struct us_data *us, unsigne
result = sddr09_send_scsi_command(us, command, 12);
- if (result != USB_STOR_TRANSPORT_GOOD)
+ if (result)
US_DEBUGP("Result for send_control in sddr09_erase %d\n",
result);
@@ -569,7 +564,7 @@ sddr09_writeX(struct us_data *us,
result = sddr09_send_scsi_command(us, command, 12);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("Result for send_control in sddr09_writeX %d\n",
result);
return result;
@@ -581,9 +576,9 @@ sddr09_writeX(struct us_data *us,
if (result != USB_STOR_XFER_GOOD) {
US_DEBUGP("Result for bulk_transfer in sddr09_writeX %d\n",
result);
- return USB_STOR_TRANSPORT_ERROR;
+ return -EIO;
}
- return USB_STOR_TRANSPORT_GOOD;
+ return 0;
}
/* erase address, write same address */
@@ -647,7 +642,7 @@ sddr09_read_sg_test_only(struct us_data
result = sddr09_send_scsi_command(us, command, 4*nsg+3);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("Result for send_control in sddr09_read_sg %d\n",
result);
return result;
@@ -655,7 +650,7 @@ sddr09_read_sg_test_only(struct us_data
buf = (unsigned char *) kmalloc(bulklen, GFP_NOIO);
if (!buf)
- return USB_STOR_TRANSPORT_ERROR;
+ return -ENOMEM;
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
buf, bulklen, NULL);
@@ -663,10 +658,10 @@ sddr09_read_sg_test_only(struct us_data
if (result != USB_STOR_XFER_GOOD) {
US_DEBUGP("Result for bulk_transfer in sddr09_read_sg %d\n",
result);
- return USB_STOR_TRANSPORT_ERROR;
+ return -EIO;
}
- return USB_STOR_TRANSPORT_GOOD;
+ return 0;
}
#endif
@@ -695,14 +690,13 @@ sddr09_read_status(struct us_data *us, u
command[1] = LUNBITS;
result = sddr09_send_scsi_command(us, command, 12);
- if (result != USB_STOR_TRANSPORT_GOOD)
+ if (result)
return result;
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
data, 64, NULL);
*status = data[0];
- return (result == USB_STOR_XFER_GOOD ?
- USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR);
+ return (result == USB_STOR_XFER_GOOD ? 0 : -EIO);
}
static int
@@ -725,7 +719,7 @@ sddr09_read_data(struct us_data *us,
buffer = kmalloc(len, GFP_NOIO);
if (buffer == NULL) {
printk("sddr09_read_data: Out of memory\n");
- return USB_STOR_TRANSPORT_ERROR;
+ return -ENOMEM;
}
// Figure out the initial LBA and page
@@ -736,7 +730,7 @@ sddr09_read_data(struct us_data *us,
// This could be made much more efficient by checking for
// contiguous LBA's. Another exercise left to the student.
- result = USB_STOR_TRANSPORT_GOOD;
+ result = 0;
index = offset = 0;
while (sectors > 0) {
@@ -749,7 +743,7 @@ sddr09_read_data(struct us_data *us,
if (lba >= maxlba) {
US_DEBUGP("Error: Requested lba %u exceeds "
"maximum %u\n", lba, maxlba);
- result = USB_STOR_TRANSPORT_ERROR;
+ result = -EIO;
break;
}
@@ -763,7 +757,7 @@ sddr09_read_data(struct us_data *us,
/* This is not really an error. It just means
that the block has never been written.
- Instead of returning USB_STOR_TRANSPORT_ERROR
+ Instead of returning an error
it is better to return all zero data. */
memset(buffer, 0, len);
@@ -778,7 +772,7 @@ sddr09_read_data(struct us_data *us,
result = sddr09_read20(us, address>>1,
pages, info->pageshift, buffer, 0);
- if (result != USB_STOR_TRANSPORT_GOOD)
+ if (result)
break;
}
@@ -844,7 +838,7 @@ sddr09_write_lba(struct us_data *us, uns
pba = sddr09_find_unused_pba(info, lba);
if (!pba) {
printk("sddr09_write_lba: Out of unused blocks\n");
- return USB_STOR_TRANSPORT_ERROR;
+ return -ENOSPC;
}
info->pba_to_lba[pba] = lba;
info->lba_to_pba[lba] = pba;
@@ -855,7 +849,7 @@ sddr09_write_lba(struct us_data *us, uns
/* Maybe it is impossible to write to PBA 1.
Fake success, but don't do anything. */
printk("sddr09: avoid writing to pba 1\n");
- return USB_STOR_TRANSPORT_GOOD;
+ return 0;
}
pagelen = (1 << info->pageshift) + (1 << CONTROL_SHIFT);
@@ -864,7 +858,7 @@ sddr09_write_lba(struct us_data *us, uns
address = (pba << (info->pageshift + info->blockshift));
result = sddr09_read22(us, address>>1, info->blocksize,
info->pageshift, blockbuffer, 0);
- if (result != USB_STOR_TRANSPORT_GOOD)
+ if (result)
return result;
/* check old contents and fill lba */
@@ -911,7 +905,7 @@ sddr09_write_lba(struct us_data *us, uns
{
unsigned char status = 0;
int result2 = sddr09_read_status(us, &status);
- if (result2 != USB_STOR_TRANSPORT_GOOD)
+ if (result2)
US_DEBUGP("sddr09_write_inplace: cannot read status\n");
else if (status != 0xc0)
US_DEBUGP("sddr09_write_inplace: status after write:
0x%x\n",
@@ -952,7 +946,7 @@ sddr09_write_data(struct us_data *us,
blockbuffer = kmalloc(blocklen, GFP_NOIO);
if (!blockbuffer) {
printk("sddr09_write_data: Out of memory\n");
- return USB_STOR_TRANSPORT_ERROR;
+ return -ENOMEM;
}
// Since we don't write the user data directly to the device,
@@ -964,14 +958,14 @@ sddr09_write_data(struct us_data *us,
if (buffer == NULL) {
printk("sddr09_write_data: Out of memory\n");
kfree(blockbuffer);
- return USB_STOR_TRANSPORT_ERROR;
+ return -ENOMEM;
}
// Figure out the initial LBA and page
lba = address >> info->blockshift;
page = (address & info->blockmask);
- result = USB_STOR_TRANSPORT_GOOD;
+ result = 0;
index = offset = 0;
while (sectors > 0) {
@@ -987,7 +981,7 @@ sddr09_write_data(struct us_data *us,
result = sddr09_write_lba(us, lba, page, pages,
buffer, blockbuffer);
- if (result != USB_STOR_TRANSPORT_GOOD)
+ if (result)
break;
page = 0;
@@ -1036,7 +1030,7 @@ sddr09_read_deviceID(struct us_data *us,
command[1] = LUNBITS;
result = sddr09_send_scsi_command(us, command, 12);
- if (result != USB_STOR_TRANSPORT_GOOD)
+ if (result)
return result;
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
@@ -1045,8 +1039,7 @@ sddr09_read_deviceID(struct us_data *us,
for (i = 0; i < 4; i++)
deviceID[i] = content[i];
- return (result == USB_STOR_XFER_GOOD ?
- USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR);
+ return (result == USB_STOR_XFER_GOOD ? 0 : -EIO);
}
static int
@@ -1055,7 +1048,7 @@ sddr09_get_wp(struct us_data *us, struct
unsigned char status;
result = sddr09_read_status(us, &status);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("sddr09_get_wp: read_status fails\n");
return result;
}
@@ -1071,7 +1064,7 @@ sddr09_get_wp(struct us_data *us, struct
if (status & 0x1)
US_DEBUGP(" Error");
US_DEBUGP("\n");
- return USB_STOR_TRANSPORT_GOOD;
+ return 0;
}
#if 0
@@ -1103,7 +1096,7 @@ sddr09_get_cardinfo(struct us_data *us,
result = sddr09_read_deviceID(us, deviceID);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("Result of read_deviceID is %d\n", result);
printk("sddr09: could not read card info\n");
return NULL;
@@ -1214,7 +1207,7 @@ sddr09_read_map(struct us_data *us) {
us, address>>1,
min(alloc_blocks, numblocks - i),
buffer, 0);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
result = -1;
goto done;
}
@@ -1402,7 +1395,7 @@ usb_stor_sddr09_dpcm_init(struct us_data
return result;
result = sddr09_send_command(us, 0x01, USB_DIR_IN, data, 2);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("sddr09_init: send_command fails\n");
return result;
}
@@ -1411,7 +1404,7 @@ usb_stor_sddr09_dpcm_init(struct us_data
// get 07 02
result = sddr09_send_command(us, 0x08, USB_DIR_IN, data, 2);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("sddr09_init: 2nd send_command fails\n");
return result;
}
@@ -1420,7 +1413,7 @@ usb_stor_sddr09_dpcm_init(struct us_data
// get 07 00
result = sddr09_request_sense(us, data, 18);
- if (result == USB_STOR_TRANSPORT_GOOD && data[2] != 0) {
+ if (result == 0 && data[2] != 0) {
int j;
for (j=0; j<18; j++)
printk(" %02X", data[j]);
@@ -1567,7 +1560,9 @@ int sddr09_transport(struct scsi_cmnd *s
US_DEBUGP("READ_10: read page %d pagect %d\n",
page, pages);
- return sddr09_read_data(us, page, pages);
+ result = sddr09_read_data(us, page, pages);
+ return (result == 0 ? USB_STOR_TRANSPORT_GOOD :
+ USB_STOR_TRANSPORT_ERROR);
}
if (srb->cmnd[0] == WRITE_10) {
@@ -1580,7 +1575,9 @@ int sddr09_transport(struct scsi_cmnd *s
US_DEBUGP("WRITE_10: write page %d pagect %d\n",
page, pages);
- return sddr09_write_data(us, page, pages);
+ result = sddr09_write_data(us, page, pages);
+ return (result == 0 ? USB_STOR_TRANSPORT_GOOD :
+ USB_STOR_TRANSPORT_ERROR);
}
/* catch-all for all other commands, except
@@ -1606,10 +1603,10 @@ int sddr09_transport(struct scsi_cmnd *s
US_DEBUGP("SDDR09: Send control for command %s\n", ptr);
result = sddr09_send_scsi_command(us, srb->cmnd, 12);
- if (result != USB_STOR_TRANSPORT_GOOD) {
+ if (result) {
US_DEBUGP("sddr09_transport: sddr09_send_scsi_command "
"returns %d\n", result);
- return result;
+ return USB_STOR_TRANSPORT_ERROR;
}
if (srb->request_bufflen == 0)
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_idv37&alloc_id865&op=click
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
