From: Ian Abbott <[EMAIL PROTECTED]>
Hi Greg,
This patch adds two new devices to the ftdi_sio driver's device ID
table. The device IDs were supplied by Cory Lee to support two POS
printers made by Westrex International (Model 777 and Model 8900F).
Please apply, thanks!
Signed-off-by: Ian Abbott <[EMAIL PROTECTED]>
diff -ur a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
--- a/drivers/usb/serial/ftdi_sio.c 2006-01-09 16:50:04.000000000 +0000
+++ b/drivers/usb/serial/ftdi_sio.c 2006-01-09 17:00:17.000000000 +0000
@@ -480,6 +480,8 @@
{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_B1_PID) },
{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) },
{ USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff -ur a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
--- a/drivers/usb/serial/ftdi_sio.h 2006-01-09 16:50:04.000000000 +0000
+++ b/drivers/usb/serial/ftdi_sio.h 2006-01-09 16:59:27.000000000 +0000
@@ -365,6 +365,12 @@
#define POSIFLEX_VID 0x0d3a /* Vendor ID */
#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */
+/*
+ * Westrex International devices submitted by Cory Lee
+ */
+#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */
+#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */
+
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
