Hi guys,
got a log for you. This is kernel 2.6.15, with Phil's patch. The section
in unusual_devs looks like this:
UNUSUAL_DEV( 0x054c, 0x0010, 0x0000, 0x9999,
"Sony",
"Sony DSC",
US_SC_SCSI, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN | US_FL_NOT_LOCKABLE |
US_FL_NO_WP_DETECT ),
So here's dmesg with verbose debug turned on. Hope you can make
something out of this.
Boris
usb 4-3: new high speed USB device using ehci_hcd and address 5
usb-storage: USB Mass Storage device detected
usb-storage: -- associate_dev
usb-storage: Vendor: 0x054c, Product: 0x0010, Revision: 0x0600
usb-storage: Interface Subclass: 0xff, Protocol: 0x01
usb-storage: Transport: Control/Bulk
usb-storage: Protocol: Transparent SCSI
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: *** thread sleeping.
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 24 00
usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00
len=6
usb-storage: command_abort called
usb-storage: usb_stor_stop_transport called
usb-storage: -- cancelling URB
usb-storage: Status code -104; transferred 0/6
usb-storage: -- transfer cancelled
usb-storage: Call to usb_stor_ctrl_transfer() returned 4
usb-storage: -- command was aborted
usb 4-3: reset high speed USB device using ehci_hcd and address 5
usb-storage: usb_reset_device returns 0
usb-storage: scsi command aborted
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00
usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00
len=6
usb-storage: command_abort called
usb-storage: usb_stor_stop_transport called
usb-storage: -- cancelling URB
usb-storage: Status code -104; transferred 0/6
usb-storage: -- transfer cancelled
usb-storage: Call to usb_stor_ctrl_transfer() returned 4
usb-storage: -- command was aborted
usb 4-3: reset high speed USB device using ehci_hcd and address 5
usb-storage: usb_reset_device returns 0
usb-storage: scsi command aborted
usb-storage: *** thread sleeping.
usb-storage: device_reset called
usb-storage: usb_stor_CB_reset called
usb-storage: usb_stor_control_msg: rq=00 rqtype=21 value=0000 index=00
len=12
usb-storage: Soft reset failed: -32
usb-storage: bus_reset called
usb 4-3: reset high speed USB device using ehci_hcd and address 5
usb-storage: usb_reset_device returns 0
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00
usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00
len=6
usb-storage: command_abort called
usb-storage: usb_stor_stop_transport called
usb-storage: -- cancelling URB
usb-storage: Status code -104; transferred 0/6
usb-storage: -- transfer cancelled
usb-storage: Call to usb_stor_ctrl_transfer() returned 4
usb-storage: -- command was aborted
usb 4-3: reset high speed USB device using ehci_hcd and address 5
usb-storage: usb_reset_device returns 0
usb-storage: scsi command aborted
usb-storage: *** thread sleeping.
1:0:0:0: scsi: Device offlined - not ready after error recovery
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: device scan complete
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
