Hi all, i am getting the following messages on the shell when i insert a USb pen drive, i want to remove these debug messages.
hub 1-0:1.0: over-current change on port 1 usb 1-1: new high speed USB device using ehci_hcd and address 2 usb 1-1: Product: USB DISK usb 1-1: Manufacturer: usb 1-1: SerialNumber: 073C1A1A009F scsi0 : SCSI emulation for USB Mass Storage devices Vendor: Model: USB DISK Pro Rev: 1.1b Type: Direct-Access ANSI SCSI revision: 00 SCSI device sda: 1012736 512-byte hdwr sectors (519 MB) sda: assuming Write Enabled sda: assuming drive cache: write through SCSI device sda: 1012736 512-byte hdwr sectors (519 MB) sda: assuming Write Enabled sda: assuming drive cache: write through sda:<7>usb-storage: queuecommand called sda1 On 1/10/06, Conio sandiago <[EMAIL PROTECTED]> wrote: > Hi All, > I have developed a USB host controller driver, > and at the time of development, > i had enables the USB and EHCI debug ,mesages. > Now i have removed them from the kernel configuration. > > But when i insert a pendrive in the Host port, i see the Debug mesages > on the shell. > > > Does anybody have some idea about how to stop > these debug messages coming on shell. > > Regards > conio > ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_idv37&alloc_id865&op=click _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
