> experiencing the same problem after all. I feel so alone again... However, at least temperatur goes slightly up (2K) wenn i load ehci-hcd and I can confirm the ASYNC problem:
bus pci, device 0000:00:10.3 (driver 10 Dec 2004) EHCI Host Controller EHCI 1.00, hcd state 1 ownership 01000001 linux SMI sts/enable 0xe0080000 structural params 0x00003206 capability params 0x00006872 status 0008 FLR command 010009 (park)=0 ithresh=1 period=256 RUN intrenable 37 IAA FATAL PCD ERR INT uframe 0bb4 port 1 status 001000 POWER sig=se0 port 2 status 001000 POWER sig=se0 port 3 status 001000 POWER sig=se0 port 4 status 001005 POWER sig=se0 PE CONNECT port 5 status 001000 POWER sig=se0 port 6 status 001000 POWER sig=se0 irq normal 963 err 0 reclaim 452 (lost 17) complete 964 unlink 0 bus pci, device 0000:00:10.3 (driver 10 Dec 2004) EHCI Host Controller EHCI 1.00, hcd state 1 ownership 01000001 linux SMI sts/enable 0xe0080000 structural params 0x00003206 capability params 0x00006872 status a008 Async Recl FLR command 010009 (park)=0 ithresh=1 period=256 RUN intrenable 37 IAA FATAL PCD ERR INT uframe 3851 port 1 status 001000 POWER sig=se0 port 2 status 001000 POWER sig=se0 port 3 status 001000 POWER sig=se0 port 4 status 001005 POWER sig=se0 PE CONNECT port 5 status 001000 POWER sig=se0 port 6 status 001000 POWER sig=se0 irq normal 963 err 0 reclaim 452 (lost 17) complete 964 unlink 0 So there at least some similarities. Helmut -- My GNUpg fingerprint http://www.gnupg.org 4563 F4FB 0B7E 8698 53CD 00E9 E319 35BD 6A91 1656 ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642 _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
