Hello,
This patch adds support for the Nokia ca42 version 2 cable to the
cypress_m8 driver. The device was tested by others with this patch and
found to be compatible with the cypress_m8 driver. A special note
should be taken that this cable seems to vary in the type of chipset
used. This patch supports the cable with product id 0x4101. Please
find the patch attached.
Thank you,
Lonnie Mendez
-----
Add support for the Nokia ca42 version 2 cable to the cypress_m8 driver.
Signed-off-by: Lonnie Mendez <[EMAIL PROTECTED]>
--- a/drivers/usb/serial/cypress_m8.c 2006-03-01 10:17:31.000000000 -0600
+++ b/drivers/usb/serial/cypress_m8.c 2006-03-01 10:13:43.000000000 -0600
@@ -98,10 +98,16 @@
{ } /* Terminating entry */
};
+static struct usb_device_id id_table_nokiaca42v2 [] = {
+ { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
+ { } /* Terminating entry */
+};
+
static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
+ { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
{ } /* Terminating entry */
};
@@ -148,6 +154,7 @@
/* function prototypes for the Cypress USB to serial device */
static int cypress_earthmate_startup (struct usb_serial *serial);
static int cypress_hidcom_startup (struct usb_serial *serial);
+static int cypress_ca42v2_startup (struct usb_serial *serial);
static void cypress_shutdown (struct usb_serial *serial);
static int cypress_open (struct usb_serial_port *port, struct
file *filp);
static void cypress_close (struct usb_serial_port *port, struct
file *filp);
@@ -234,6 +241,34 @@
.write_int_callback = cypress_write_int_callback,
};
+static struct usb_serial_driver cypress_ca42v2_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "nokiaca42v2",
+ },
+ .description = "Nokia CA-42 V2 Adapter",
+ .id_table = id_table_nokiaca42v2,
+ .num_interrupt_in = 1,
+ .num_interrupt_out = 1,
+ .num_bulk_in = NUM_DONT_CARE,
+ .num_bulk_out = NUM_DONT_CARE,
+ .num_ports = 1,
+ .attach = cypress_ca42v2_startup,
+ .shutdown = cypress_shutdown,
+ .open = cypress_open,
+ .close = cypress_close,
+ .write = cypress_write,
+ .write_room = cypress_write_room,
+ .ioctl = cypress_ioctl,
+ .set_termios = cypress_set_termios,
+ .tiocmget = cypress_tiocmget,
+ .tiocmset = cypress_tiocmset,
+ .chars_in_buffer = cypress_chars_in_buffer,
+ .throttle = cypress_throttle,
+ .unthrottle = cypress_unthrottle,
+ .read_int_callback = cypress_read_int_callback,
+ .write_int_callback = cypress_write_int_callback,
+};
/*****************************************************************************
* Cypress serial helper functions
@@ -285,6 +320,12 @@
__FUNCTION__);
new_baudrate = priv->baud_rate;
}
+ } else if (priv->chiptype == CT_CA42V2) {
+ if ( (new_baudrate =
mask_to_rate(baud_mask)) == -1) {
+ err("%s - failed setting baud
rate, unsupported speed",
+ __FUNCTION__);
+ new_baudrate = priv->baud_rate;
+ }
} else if (priv->chiptype == CT_GENERIC) {
if ( (new_baudrate =
mask_to_rate(baud_mask)) == -1) {
err("%s - failed setting baud
rate, unsupported speed",
@@ -499,6 +540,25 @@
} /* cypress_hidcom_startup */
+static int cypress_ca42v2_startup (struct usb_serial *serial)
+{
+ struct cypress_private *priv;
+
+ dbg("%s", __FUNCTION__);
+
+ if (generic_startup(serial)) {
+ dbg("%s - Failed setting up port %d", __FUNCTION__,
+ serial->port[0]->number);
+ return 1;
+ }
+
+ priv = usb_get_serial_port_data(serial->port[0]);
+ priv->chiptype = CT_CA42V2;
+
+ return 0;
+} /* cypress_ca42v2_startup */
+
+
static void cypress_shutdown (struct usb_serial *serial)
{
struct cypress_private *priv;
@@ -943,6 +1003,10 @@
*(tty->termios) = tty_std_termios;
tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
CLOCAL;
+ } else if (priv->chiptype == CT_CA42V2) {
+ *(tty->termios) = tty_std_termios;
+ tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
+ CLOCAL;
}
priv->termios_initialized = 1;
}
@@ -1543,6 +1607,9 @@
retval = usb_serial_register(&cypress_hidcom_device);
if (retval)
goto failed_hidcom_register;
+ retval = usb_serial_register(&cypress_ca42v2_device);
+ if (retval)
+ goto failed_ca42v2_register;
retval = usb_register(&cypress_driver);
if (retval)
goto failed_usb_register;
@@ -1551,6 +1618,8 @@
return 0;
failed_usb_register:
usb_deregister(&cypress_driver);
+failed_ca42v2_register:
+ usb_serial_deregister(&cypress_ca42v2_device);
failed_hidcom_register:
usb_serial_deregister(&cypress_hidcom_device);
failed_em_register:
@@ -1567,6 +1636,7 @@
usb_deregister (&cypress_driver);
usb_serial_deregister (&cypress_earthmate_device);
usb_serial_deregister (&cypress_hidcom_device);
+ usb_serial_deregister (&cypress_ca42v2_device);
}
--- a/drivers/usb/serial/cypress_m8.h 2006-03-01 10:14:34.000000000 -0600
+++ b/drivers/usb/serial/cypress_m8.h 2006-03-01 10:05:19.000000000 -0600
@@ -18,6 +18,10 @@
/* Cypress HID->COM RS232 Adapter */
#define VENDOR_ID_CYPRESS 0x04b4
#define PRODUCT_ID_CYPHIDCOM 0x5500
+
+/* Nokia CA-42 USB to serial cable */
+#define VENDOR_ID_DAZZLE 0x07d0
+#define PRODUCT_ID_CA42 0x4101
/* End of device listing */
/* Used for setting / requesting serial line settings */
@@ -34,6 +38,7 @@
#define CT_EARTHMATE 0x01
#define CT_CYPHIDCOM 0x02
+#define CT_CA42V2 0x03
#define CT_GENERIC 0x0F
/* End of chiptype definitions */
