I wrote this to "Greg KH": > Hi, > I have Mustek DV5200 and it have 30MB build in memmory and I can put inside it > a SD card. The problem is that when I connect it to my computer only build in > memmory is detected as sda1 but no SD card (Windows detects two removable > devices). Is it problem with my configuration or it just would not work under > Linux? and he advised me:
> Try setting the kernel config option: > CONFIG_SCSI_MULTI_LUN=y > and then it should work just fine. > If not, please let the people on the linux-usb-devel mailing list know, > they are the best ones to help you out. so i recompile my kernel and it dosen't worked: Aspire3002LC linux # dmesg usb 3-2: new full speed USB device using ohci_hcd and address 2 usb 3-2: new full speed USB device using ohci_hcd and address 3 scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning Vendor: DV Model: USB Device Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sda: 57856 512-byte hdwr sectors (30 MB) sda: Write Protect is off sda: Mode Sense: 20 00 00 00 sda: assuming drive cache: write through SCSI device sda: 57856 512-byte hdwr sectors (30 MB) sda: Write Protect is off sda: Mode Sense: 20 00 00 00 sda: assuming drive cache: write through sda: sda1 sd 0:0:0:0: Attached scsi removable disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 usb-storage: device scan complete ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
