On Thu, 16 Mar 2006, Vishal Oliyil Kunnil wrote:
> Hi, > I am trying to get the isp1362-hcd driver running on a custom PXA board . Got > lots of info from the list archives, had to pull the H_WAKE pin low to get > the clock trigger ready (Thanks to the list archives :) ) > > IRQ 27 is assinged to ISP1362 INT1, but i am getting the error irq 25 :nobody > cared ...... then i enabled the CHIP_BUFFER_TEST to realise it fails . > Could some one tell me why the buffer test would fail ? I seem to have no version of isp1362 driver here, which could print out messages that you showed (below). Could you please post your driver or put it up on the web. Also, what kernel version are you using? Olav > isp1362_chip_test: memory check with 2 byte offset 0 failed > isp1362_chip_test: memory check with 3 byte offset 0 failed > isp1362_chip_test: memory check with 4 byte offset 0 failed > isp1362_chip_test: memory check with 5 byte offset 0 failed > isp1362_chip_test: memory check with 6 byte offset 0 failed > isp1362_chip_test: memory check with 7 byte offset 0 failed > isp1362_chip_test: memory check failed > isp1362_chip_test: memory check with offset 00 failed ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
