One "industrial pda" works again after this patch; when
the usbnet minidrivers got split out, it didn't get put
into the cdc ethernet blacklist.
- Dave
Earlier work splitting the "usbnet" driver out into a core plus driver modules
was missing a blacklist entry for the Olympus R-1000; it must not use the
CDC Ethernet driver, only the "zaurus" support works with it.
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
Index: g26/drivers/usb/net/cdc_ether.c
===================================================================
--- g26.orig/drivers/usb/net/cdc_ether.c 2006-05-24 21:07:06.000000000 -0700
+++ g26/drivers/usb/net/cdc_ether.c 2006-05-26 10:27:38.000000000 -0700
@@ -455,6 +455,18 @@ static const struct usb_device_id produc
.driver_info = 0,
},
+/* Olympus has some models with a Zaurus-compatible option.
+ * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
+ */
+{
+ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+ | USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x07B4,
+ .idProduct = 0x0F02, /* R-1000 */
+ ZAURUS_MASTER_INTERFACE,
+ .driver_info = 0,
+},
+
/*
* WHITELIST!!!
*
