elmar gerdes wrote:
> hi folks,
>   
Hi
> I'm running a 2.6.16.16 kernel on a small Via Epia Nano N 10000E board
> with a "Luke" processor.
>
> Running a bridge over one on-board ethernet interface (via-rhine) and a
> USB-to-ethernet adaptor D-Link DUB-E100 (with asix AX88772 chip, drivers:
> usbnet + asix), I occasionally get an oops like the one I append to this
> mail.
>   
I've been trying to get that DUB-E100 with the asix AX8872 chip to work,
and didn't succeed.
Could you please share with this list how did you get it to work?
I've tried adding a new ProductID and VendorID to drivers/usb/net/asix.c
and use the ax88772_info driver_info struct. The kernel recognizes it as
the correct network card but when I perform a ethtool eth0 the only
output I get is:

Settings for eth0:
    Current message level: 0x00000007 (7)
    Link detected: yes

Can you give me a hint on this
 
> the adaptor is running in high-speed mode under high load (about 65..75
> Mbps, full-duplex).  the last occurrence of this error was when the board
> had been running all night long, and then I logged in.
>
> since the first messages in the Oops are about ehci_hcd (scan_periodic
> and ehci_work), I chose this mailing list to present the error to.  any
> help would be warmly welcome.
>
> greetings from
>               elmar
>   
Thank you
Rui Santos

> PS: I'll give you more info about the system, just as you need it.
>
>
>
>
> Unable to handle kernel NULL pointer dereference at virtual address 00000216
>  printing eip:
> cc86fde0
> *pde = 00000000
> Oops: 0002 [ #1 ]
> Modules linked in: bridge padlock blowfish twofish cdc_subset asix usbnet 
> sis190
>  tg3 bnx2 r8169 sky2 e1000 8139too eepro100 3c59x via_rhine mii pcmcia 
> pcmcia_co
> re vfat fat mct_u232 pl2303 usbserial usblp ehci_hcd uhci_hcd ohci_hcd sd_mod 
> us
> b_storage scsi_mod usbcore
> CPU:    0
> EIP:    0060:[<cc86fde0>]      Not tainted VLI
> EFLAGS: 00010202   (2.6.16.16 #1)
> EIP is at scan_periodic+0x120/0x2f0 [ehci_hcd]
> eax: 00000216   ebx: 00000000   ecx: c13af108   edx: cb95d0d0
> esi: 00000000   edi: cb95d0d0   ebp: cb983108   esp: cb45be6c
> ds: 007b   es: 007b   ss: 0068
> Process sh (pid: 1192, threadinfo=cb45a000 task=cbfdd050)
> Stack: <0>00000006 c13af108 cb95d000 00000000 00000800 00000216 00000216 
> 0000004
> 2
>        cb95d0d0 cb45bfbc cb95d0d0 00000001 cc8700fc cb95d0d0 cb45bfbc 00000000
>        00000000 cc870569 cb95d0d0 cb45bfbc cbd4ca00 cbbaa080 0807864a cbdfac3c
> Call Trace:
>  [<cc8700fc>] ehci_work+0x4c/0xd0 [ehci_hcd]
>  [<cc870569>] ehci_irq+0xc9/0x160 [ehci_hcd]
>  [<c012ed63>] find_get_page+0x13/0x30
>  [<c012fb4b>] filemap_nopage+0x8b/0x320
>  [<c013abf8>] do_no_page+0x58/0x1d0
>  [<c013accd>] do_no_page+0x12d/0x1d0
>  [<c013ae98>] __handle_mm_fault+0xb8/0x190
>  [<c01cc7e1>] copy_to_user+0x31/0x40
>  [<cc835958>] usb_hcd_irq+0x28/0x70 [usbcore]
>  [<c012db08>] handle_IRQ_event+0x28/0x70
>  [<c012db9f>] __do_IRQ+0x4f/0xa0
>  [<c010475a>] do_IRQ+0x1a/0x30
>  [<c0102ffa>] common_interrupt+0x1a/0x20
> Code: f7 74 24 10 89 54 24 14 e9 4e ff ff ff 8b 54 24 08 f6 82 cc 00 00 00 01 
> 74
>  25 8b 54 24 34 8b 44 24 14 89 42 30 8b 42 04 8b 40 0c <00> 00 00 00 00 00 00 
> 00
>  24 14 89 54 24 18 0f 85 1c ff ff ff 83
>  <0>Kernel panic - not syncing: Fatal exception in interrupt
>
>
>
> -------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> linux-usb-devel@lists.sourceforge.net
> To unsubscribe, use the last form field at:
> https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
>
>
>   


_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to