Hello! I used usb host's storage function on my LPD7A404 board, and used sharp's linux-2.6.12 BSP. when i inserted usb disk in the board, the log show some error message about bulk-in transfer:
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x7 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x80000007 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x80000007 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x5, ASC: 0x20, ASCQ: 0x0 usb-storage: (Unknown Key): (unknown ASC/ASCQ) usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x8 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x8 R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_CAPACITY (10 bytes) usb-storage: 25 00 00 00 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x9 L 8 F 128 Trg 0 LUN 0 CL 10 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes usb-storage: Status code 0; transferred 8/8 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x9 R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. SCSI device sda: 130816 512-byte hdwr sectors (67 MB) usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command MODE_SENSE (6 bytes) usb-storage: 1a 00 3f 00 c0 00 usb-storage: Bulk Command S 0x43425355 T 0xa L 192 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_buf: xfer 192 bytes usb-storage: Status code 0; transferred 44/192 usb-storage: -- short transfer usb-storage: Bulk data transfer result 0x1 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0xa R 148 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. sda: Write Protect is off sda: Mode Sense: 0b 00 00 08 sda: assuming drive cache: write through sda:<7>usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 00 00 00 00 08 00 usb-storage: Bulk Command S 0x43425355 T 0xb L 4096 F 128 Trg 0 LUN 0 CL 10 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 /********************has some errors******************************/ usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries lh7a404-ohci lh7a404-ohci.0: urb c17245c0 path 2 ep1in 1f120000 cc 1 --> status -84 usb-storage: Status code -84; transferred 512/4096 usb-storage: -- unknown error usb-storage: Bulk data transfer result 0x4 /***************************************************************************/ usb-storage: -- transport indicates error, resetting usb-storage: usb_stor_Bulk_reset called usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 usb-storage: Soft reset: clearing bulk-in endpoint halt usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Soft reset: clearing bulk-out endpoint halt usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=02 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Soft reset done usb-storage: scsi cmd done, result=0x70000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 00 00 00 00 08 00 usb-storage: Bulk Command S 0x43425355 T 0xc L 4096 F 128 Trg 0 LUN 0 CL 10 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries lh7a404-ohci lh7a404-ohci.0: urb c17245c0 path 2 ep1in 1e120000 cc 1 --> status -84 usb-storage: Status code -84; transferred 512/4096 usb-storage: -- unknown error usb-storage: Bulk data transfer result 0x4 usb-storage: -- transport indicates error, resetting usb-storage: usb_stor_Bulk_reset called usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 usb-storage: Soft reset: clearing bulk-in endpoint halt usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Soft reset: clearing bulk-out endpoint halt usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=02 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Soft reset done usb-storage: scsi cmd done, result=0x70000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 00 00 00 00 08 00 usb-storage: Bulk Command S 0x43425355 T 0xd L 4096 F 128 Trg 0 LUN 0 CL 10 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries lh7a404-ohci lh7a404-ohci.0: urb c1724e00 path 2 ep1in 1e120000 cc 1 --> status -84 usb-storage: Status code -84; transferred 512/4096 usb-storage: -- unknown error usb-storage: Bulk data transfer result 0x4 usb-storage: -- transport indicates error, resetting usb-storage: usb_stor_Bulk_reset called usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 maybe because usblp didn't use bulk-in transfer, i found usb printer had worked normally on board. now i don't know how to debug, and i don't know whethe it is the bug of LH7A404 or usb-storage driver. if you used it normally, please give me some suggestion, Thank you! ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
