From: Alan Stern <[EMAIL PROTECTED]>
My recent patch converting usb-storage to use
usb_reset_composite_device() added a bug, a race between reset and
disconnect. It was necessary to drop the private lock while executing a
reset, and if a disconnect occurs at that time it will cause a crash.
This patch (as722) fixes the problem by explicitly checking for an early
termination after executing each command.
Signed-off-by: Alan Stern <[EMAIL PROTECTED]>
Signed-off-by: Greg Kroah-Hartman <[EMAIL PROTECTED]>
---
drivers/usb/storage/usb.c | 22 ++++++++++++++--------
1 files changed, 14 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 1185aca..04c3bec 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -373,8 +373,12 @@ static int usb_stor_control_thread(void
/* lock access to the state */
scsi_lock(host);
+ /* did the command already complete because of a disconnect? */
+ if (!us->srb)
+ ; /* nothing to do */
+
/* indicate that the command is done */
- if (us->srb->result != DID_ABORT << 16) {
+ else if (us->srb->result != DID_ABORT << 16) {
US_DEBUGP("scsi cmd done, result=0x%x\n",
us->srb->result);
us->srb->scsi_done(us->srb);
@@ -836,32 +840,34 @@ static void dissociate_dev(struct us_dat
* the host */
static void quiesce_and_remove_host(struct us_data *us)
{
+ struct Scsi_Host *host = us_to_host(us);
+
/* Prevent new USB transfers, stop the current command, and
* interrupt a SCSI-scan or device-reset delay */
+ scsi_lock(host);
set_bit(US_FLIDX_DISCONNECTING, &us->flags);
+ scsi_unlock(host);
usb_stor_stop_transport(us);
wake_up(&us->delay_wait);
/* It doesn't matter if the SCSI-scanning thread is still running.
* The thread will exit when it sees the DISCONNECTING flag. */
- /* Wait for the current command to finish, then remove the host */
- mutex_lock(&us->dev_mutex);
- mutex_unlock(&us->dev_mutex);
-
/* queuecommand won't accept any new commands and the control
* thread won't execute a previously-queued command. If there
* is such a command pending, complete it with an error. */
+ mutex_lock(&us->dev_mutex);
if (us->srb) {
us->srb->result = DID_NO_CONNECT << 16;
- scsi_lock(us_to_host(us));
+ scsi_lock(host);
us->srb->scsi_done(us->srb);
us->srb = NULL;
- scsi_unlock(us_to_host(us));
+ scsi_unlock(host);
}
+ mutex_unlock(&us->dev_mutex);
/* Now we own no commands so it's safe to remove the SCSI host */
- scsi_remove_host(us_to_host(us));
+ scsi_remove_host(host);
}
/* Second stage of disconnect processing: deallocate all resources */
--
1.4.1
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
