Hi, Not sure if the problem is the ueagle-atm driver, or the usbatm one (hence the cross post).
I have a Sagem Fast 800 and when I plug it in, the kernel recognises it and loads the firmware. The modem itself never seems to become operational (nothing after [ueagle-atm]: (re)booting started) but I get usbatm_complete failures. I am running 2.6.17 from kernel.org and attached is dmesg output. Any pointers or help appreciated. Please CC me as I'm on neither of these mailing lists. Thanks, Anand usb 2-1: new full speed USB device using uhci_hcd and address 4 usb 2-1: configuration #1 chosen from 1 choice usb 2-1: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9032) : Eagle III usb 2-1: reset full speed USB device using uhci_hcd and address 4 usb 2-1: [ueagle-atm] pre-firmware device, uploading firmware usb 2-1: [ueagle-atm] loading firmware ueagle-atm/eagleIII.fw usb 2-1: [ueagle-atm] firmware uploaded usb 2-1: USB disconnect, address 4 usb 2-1: new full speed USB device using uhci_hcd and address 5 usb 2-1: configuration #1 chosen from 1 choice usb 2-1: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9031) : Eagle III usb 2-1: reset full speed USB device using uhci_hcd and address 5 usb 2-1: [ueagle-atm] using iso mode usb 2-1: [ueagle-atm] (re)booting started ATM dev 0: usbatm_complete: urb 0xedafef00 failed (-18)! ATM dev 0: usbatm_complete: urb 0xeb31fc00 failed (-18)! ATM dev 0: usbatm_complete: urb 0xb5d20740 failed (-18)! ATM dev 0: usbatm_complete: urb 0xb5d20800 failed (-18)! ATM dev 0: usbatm_complete: urb 0xedafef00 failed (-18)! ATM dev 0: usbatm_complete: urb 0xeb31fc00 failed (-18)! ATM dev 0: usbatm_complete: urb 0xeb31fc00 failed (-18)! printk: 24 messages suppressed. ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
