On Fri, 4 Aug 2006, Jesper Juhl wrote: > On 03/08/06, Alan Stern <[EMAIL PROTECTED]> wrote: > > > > Has this happened more than once? > > Seems to happen consistently after ~100000 interrupts. > > > In case it happens again, here's how > > you can get more information. Turn on CONFIG_USB_DEBUG and > > CONFIG_DEBUG_FS, and mount a debugfs filesystem somewhere (say > > /sys/kernel/debug). Then after the problem occurs, save a copy of > > > > /sys/kernel/debug/uhci/0000:00:1d.1 > > > > # cat /sys/kernel/debug/uhci/0000:00:1d.1 > Root-hub state: auto-stopped FSBR: 0 > HC status > usbcmd = 0048 Maxp32 CF EGSM > usbstat = 0020 HCHalted > usbint = 0002 > usbfrnum = (1)160 > flbaseadd = 37428160 > sof = 40 > stat1 = 0080 > stat2 = 0080 > Most recent frame: 458 (88) Last ISO frame: 458 (88) > > > > That will indicate whether the UHCI controller thinks it is sending an > > interrupt request.
And it shows that the controller is idle. No IRQ should be pending. > And just for completenes, here's the backtrace I got just before > saving the above info : > > irq 217: nobody cared (try booting with the "irqpoll" option) > [<c0103a3c>] show_trace_log_lvl+0x152/0x165 > [<c0103a5e>] show_trace+0xf/0x13 > [<c0103b59>] dump_stack+0x15/0x19 > [<c013846e>] __report_bad_irq+0x24/0x7f > [<c0138552>] note_interrupt+0x6b/0xd5 > [<c0137ca8>] __do_IRQ+0xf4/0x100 > [<c01050a1>] do_IRQ+0x95/0xbc > [<c0103502>] common_interrupt+0x1a/0x20 > [<c0137b7e>] handle_IRQ_event+0x20/0x56 > [<c0137c4c>] __do_IRQ+0x98/0x100 > [<c01050a1>] do_IRQ+0x95/0xbc > [<c0103502>] common_interrupt+0x1a/0x20 > [<c0100e64>] mwait_idle+0x30/0x35 > [<c0100d45>] cpu_idle+0x78/0x81 > [<c04cc7fb>] start_kernel+0x173/0x19d > [<c0100210>] 0xc0100210 > DWARF2 unwinder stuck at 0xc0100210 > Leftover inexact backtrace: > ======================= > handlers: > [<c02c5c22>] (usb_hcd_irq+0x0/0x53) > Disabling IRQ #217 Just as before. I can't tell you what's causing this to happen, except that it appears to be some sort of hardware problem. Since it doesn't seem to cause any harm you could just live with it. Or, if you're not using any full-speed or low-speed USB devices, you could simply prevent uhci-hcd from loading at all. Then IRQ 217 wouldn't get enabled in the first place. Alan Stern ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
