Begin forwarded message:
Date: Fri, 18 Aug 2006 18:12:31 -0700 From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: [Bugme-new] [Bug 7026] New: CD/DVD burning with USB writer doesn't work http://bugzilla.kernel.org/show_bug.cgi?id=7026 Summary: CD/DVD burning with USB writer doesn't work Kernel Version: 2.6.17.8 Status: NEW Severity: normal Owner: [EMAIL PROTECTED] Submitter: [EMAIL PROTECTED] Most recent kernel where this bug did not occur: 2.6.13.2, perhaps 2.6.14/ 2.6.15 (I found it broken since 2.6.16) Distribution: Debian Unstable Hardware Environment: i686, USB Mass Storage Device Genesyslogic 001600016303 Software Environment: cdrecord (newest released version), Nero Linux Problem Description: cdrecord cannot burn, error message: Cannot allocate memory. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1B 00 status: 0x0 (GOOD STATUS) cmd finished after 0.000s timeout 200s cdrecord: A write error occured. Nero simply complains about an unknown burn error without details. # lsusb Bus 005 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 006: ID 05e3:0701 Genesys Logic, Inc. USB 2.0 IDE Adapter Bus 001 Device 001: ID 0000:0000 # dmesg | grep usb usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.17.8 ehci_hcd usb usb1: SerialNumber: 0000:00:10.4 usb usb1: uevent usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: no power switching (usb 1.0) drivers/usb/core/inode.c: creating file '001' drivers/usb/core/inode.c: creating file '002' usb usb2: default language 0x0409 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.17.8 uhci_hcd usb usb2: SerialNumber: 0000:00:10.0 usb usb2: uevent usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: uevent hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: no power switching (usb 1.0) drivers/usb/core/inode.c: creating file '001' drivers/usb/core/inode.c: creating file '003' usb usb3: default language 0x0409 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.17.8 uhci_hcd usb usb3: SerialNumber: 0000:00:10.1 usb usb3: uevent usb usb3: configuration #1 chosen from 1 choice usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: uevent hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: no power switching (usb 1.0) drivers/usb/core/inode.c: creating file '001' drivers/usb/core/inode.c: creating file '004' usb usb4: default language 0x0409 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.17.8 uhci_hcd usb usb4: SerialNumber: 0000:00:10.2 usb usb4: uevent usb usb4: configuration #1 chosen from 1 choice usb usb4: adding 4-0:1.0 (config #1, interface 0) usb 4-0:1.0: uevent hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: no power switching (usb 1.0) usb 1-5: new high speed USB device using ehci_hcd and address 2 drivers/usb/core/inode.c: creating file '001' drivers/usb/core/inode.c: creating file '005' usb usb5: default language 0x0409 usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.17.8 uhci_hcd usb usb5: SerialNumber: 0000:00:10.3 usb usb5: uevent usb usb5: configuration #1 chosen from 1 choice usb usb5: adding 5-0:1.0 (config #1, interface 0) usb 5-0:1.0: uevent hub 5-0:1.0: usb_probe_interface hub 5-0:1.0: usb_probe_interface - got id hub 5-0:1.0: no power switching (usb 1.0) usb 1-5: device descriptor read/64, error -32 drivers/usb/core/inode.c: creating file '001' usb 1-5: device descriptor read/64, error -32 usb 1-5: new high speed USB device using ehci_hcd and address 3 usb 1-5: device descriptor read/64, error -32 usb 1-5: device descriptor read/64, error -32 usb 1-5: new high speed USB device using ehci_hcd and address 4 usb 1-5: device not accepting address 4, error -32 usb 1-5: new high speed USB device using ehci_hcd and address 5 usb 1-5: device not accepting address 5, error -32 usb 1-8: new high speed USB device using ehci_hcd and address 6 usb 1-8: default language 0x0409 usb 1-8: new device strings: Mfr=2, Product=3, SerialNumber=4 usb 1-8: Product: USB Mass Storage Device usb 1-8: Manufacturer: Genesyslogic usb 1-8: SerialNumber: 001600016303 usb 1-8: uevent usb 1-8: configuration #1 chosen from 1 choice usb 1-8: adding 1-8:1.0 (config #1, interface 0) usb 1-8:1.0: uevent usb-storage 1-8:1.0: usb_probe_interface usb-storage 1-8:1.0: usb_probe_interface - got id usb-storage: device found at 6 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage usb-storage: device scan complete ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
