Hello Alan > Is the failure to ACK the problem you're worried about?
Yes and the other issue(I/O error) as well. The real problem is that when we use this USB stick with out host controller, the driver takes long time to report "Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0" line. Similarly the driver takes long time when we try to mount the file system and contents of mounted directory can not be accessed. > To find out what's happening, you should compare a kernel log > from the device and a log from a PC running the same version > of the Linux kernel, that is, vanilla 2.6.12 and not Fedora's 2.6.11. I don't have a PC running 2.6.12. However I will try. > Also, it would help to increase the size of your kernel's log > buffer. I am reposting the kernel log below. The log is long because I did not edit it. Please let me know if more info is required. hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 vox160-ehci-hcd vox160-ehci-hcd.0: port 1 full speed --> companion vox160-ehci-hcd vox160-ehci-hcd.0: GetStatus port 1 status 003801 POWER OWNER si g=j CONNECT hub 1-0:1.0: port_wait_reset: err = -134 hub 2-0:1.0: state 5 ports 1 chg 0000 evt 0002 vox160-ohci-hcd vox160-ohci-hcd.0: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS hub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 vox160-ohci-hcd vox160-ohci-hcd.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS usb 2-1: new full speed USB device using vox160-ohci-hcd and address 2 vox160-ohci-hcd vox160-ohci-hcd.0: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS usb 2-1: ep0 maxpacket = 8 usb 2-1: default language 0x0409 usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: USB FLASH DISK usb 2-1: Manufacturer: 3SYSTEM usb 2-1: SerialNumber: 0307110057580 usb 2-1: hotplug usb 2-1: adding 2-1:1.0 (config #1, interface 0) usb 2-1:1.0: hotplug usb-storage 2-1:1.0: usb_probe_interface usb-storage 2-1:1.0: usb_probe_interface - got id usb-storage: USB Mass Storage device detected usb-storage: -- associate_dev usb-storage: Vendor: 0x0c76, Product: 0x0007, Revision: 0x0100 usb-storage: Interface Subclass: 0x06, Protocol: 0x50 usb-storage: Transport: Bulk usb-storage: Protocol: Transparent SCSI usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1 usb-storage: GetMaxLUN command result is 1, data is 0 usb-storage: *** thread sleeping. scsi0 : SCSI emulation for USB Mass Storage devices hub 2-0:1.0: state 5 ports 1 chg 0000 evt 0002 usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command INQUIRY (6 bytes) usb-storage: 12 00 00 00 24 00 usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes usb-storage: Status code 0; transferred 36/36 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. Vendor: 3SYSTEM Model: USB FLASH DISK Rev: 1.00 Type: Direct-Access ANSI SCSI revision: 02 usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x2 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x80000002 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x80000002 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0xf0, key: 0x6, ASC: 0x28, ASCQ: 0x0 usb-storage: (Unknown Key): (unknown ASC/ASCQ) usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x3 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x3 R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_CAPACITY (10 bytes) usb-storage: 25 00 00 00 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x4 L 8 F 128 Trg 0 LUN 0 CL 10 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes usb-storage: Status code 0; transferred 8/8 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x4 R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. SCSI device sda: 512000 512-byte hdwr sectors (262 MB) usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command MODE_SENSE (6 bytes) usb-storage: 1a 00 3f 00 c0 00 usb-storage: Bulk Command S 0x43425355 T 0x5 L 192 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes vox160-ohci-hcd vox160-ohci-hcd.0: urb 81617740 path 1 ep2out 5c0e0000 cc 5 --> status -145 usb-storage: Status code -145; transferred 0/31 usb-storage: -- timeout or NAK usb-storage: Bulk command transfer result=4 usb-storage: -- transport indicates error, resetting usb-storage: usb_stor_Bulk_reset called usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 usb-storage: Soft reset: clearing bulk-in endpoint halt usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Soft reset: clearing bulk-out endpoint halt usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=02 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Soft reset done usb-storage: scsi cmd done, result=0x70000 usb-storage: queuecommand called usb-storage: *** thread sleeping. usb-storage: *** thread awakened. usb-storage: Command MODE_SENSE (6 bytes) usb-storage: 1a 00 3f 00 c0 00 usb-storage: Bulk Command S 0x43425355 T 0x6 L 192 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes vox160-ohci-hcd vox160-ohci-hcd.0: urb 81617740 path 1 ep2out 5c0e0000 cc 5 --> status -145 usb-storage: Status code -145; transferred 0/31 usb-storage: -- timeout or NAK usb-storage: Bulk command transfer result=4 usb-storage: -- transport indicates error, resetting usb-storage: usb_stor_Bulk_reset called usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 usb-storage: Soft reset: clearing bulk-in endpoint halt usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Soft reset: clearing bulk-out endpoint halt usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=02 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Soft reset done usb-storage: scsi cmd done, result=0x70000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command MODE_SENSE (6 bytes) usb-storage: 1a 00 3f 00 c0 00 usb-storage: Bulk Command S 0x43425355 T 0x7 L 192 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes vox160-ohci-hcd vox160-ohci-hcd.0: urb 81617740 path 1 ep2out 5c0e0000 cc 5 --> status -145 usb-storage: Status code -145; transferred 0/31 usb-storage: -- timeout or NAK usb-storage: Bulk command transfer result=4 usb-storage: -- transport indicates error, resetting usb-storage: usb_stor_Bulk_reset called usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 usb-storage: Soft reset: clearing bulk-in endpoint halt usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Soft reset: clearing bulk-out endpoint halt usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=02 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Soft reset done usb-storage: scsi cmd done, result=0x70000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command MODE_SENSE (6 bytes) usb-storage: 1a 00 3f 00 c0 00 usb-storage: Bulk Command S 0x43425355 T 0x8 L 192 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes vox160-ohci-hcd vox160-ohci-hcd.0: urb 81617740 path 1 ep2out 5c0e0000 cc 5 --> status -145 usb-storage: Status code -145; transferred 0/31 usb-storage: -- timeout or NAK usb-storage: Bulk command transfer result=4 usb-storage: -- transport indicates error, resetting usb-storage: usb_stor_Bulk_reset called usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 usb-storage: Soft reset: clearing bulk-in endpoint halt usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Soft reset: clearing bulk-out endpoint halt usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=02 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Soft reset done usb-storage: scsi cmd done, result=0x70000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command MODE_SENSE (6 bytes) usb-storage: 1a 00 3f 00 c0 00 usb-storage: Bulk Command S 0x43425355 T 0x9 L 192 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_buf: xfer 192 bytes usb-storage: Status code 0; transferred 12/192 usb-storage: -- short transfer usb-storage: Bulk data transfer result 0x1 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x9 R 180 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. sda: Write Protect is off sda: Mode Sense: 0b 00 00 08 sda: assuming drive cache: write through usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0xa L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0xa R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x8000000a L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes vox160-ohci-hcd vox160-ohci-hcd.0: urb 81617740 path 1 ep2out 5c0e0000 cc 5 --> status -145 usb-storage: Status code -145; transferred 0/31 usb-storage: -- timeout or NAK usb-storage: Bulk command transfer result=4 usb-storage: -- auto-sense failure usb-storage: usb_stor_Bulk_reset called usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 usb-storage: Soft reset: clearing bulk-in endpoint halt usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Soft reset: clearing bulk-out endpoint halt usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=02 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Soft reset done usb-storage: scsi cmd done, result=0x70000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0xb L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0xb R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x8000000b L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x8000000b R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0xf0, key: 0x6, ASC: 0x28, ASCQ: 0x0 usb-storage: (Unknown Key): (unknown ASC/ASCQ) usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0xc L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0xc R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes) usb-storage: 1e 00 00 00 01 00 usb-storage: Bulk Command S 0x43425355 T 0xd L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0xd R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x8000000d L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x8000000d R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0xf0, key: 0x5, ASC: 0x20, ASCQ: 0x0 usb-storage: (Unknown Key): (unknown ASC/ASCQ) usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0xe L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0xe R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_CAPACITY (10 bytes) usb-storage: 25 00 00 00 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0xf L 8 F 128 Trg 0 LUN 0 CL 10 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes usb-storage: Status code 0; transferred 8/8 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0xf R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. SCSI device sda: 512000 512-byte hdwr sectors (262 MB) usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command MODE_SENSE (6 bytes) usb-storage: 1a 00 3f 00 c0 00 usb-storage: Bulk Command S 0x43425355 T 0x10 L 192 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes vox160-ohci-hcd vox160-ohci-hcd.0: urb 81617740 path 1 ep2out 5c0e0000 cc 5 --> status -145 usb-storage: Status code -145; transferred 0/31 usb-storage: -- timeout or NAK usb-storage: Bulk command transfer result=4 usb-storage: -- transport indicates error, resetting usb-storage: usb_stor_Bulk_reset called usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 usb-storage: Soft reset: clearing bulk-in endpoint halt usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Soft reset: clearing bulk-out endpoint halt usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=02 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Soft reset done usb-storage: scsi cmd done, result=0x70000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command MODE_SENSE (6 bytes) usb-storage: 1a 00 3f 00 c0 00 usb-storage: Bulk Command S 0x43425355 T 0x11 L 192 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes vox160-ohci-hcd vox160-ohci-hcd.0: urb 81617740 path 1 ep2out 5c0e0000 cc 5 --> status -145 usb-storage: Status code -145; transferred 0/31 usb-storage: -- timeout or NAK usb-storage: Bulk command transfer result=4 usb-storage: -- transport indicates error, resetting usb-storage: usb_stor_Bulk_reset called usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 usb-storage: Soft reset: clearing bulk-in endpoint halt usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Soft reset: clearing bulk-out endpoint halt usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=02 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Soft reset done usb-storage: scsi cmd done, result=0x70000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command MODE_SENSE (6 bytes) usb-storage: 1a 00 3f 00 c0 00 usb-storage: Bulk Command S 0x43425355 T 0x12 L 192 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes vox160-ohci-hcd vox160-ohci-hcd.0: urb 81617740 path 1 ep2out 5c0e0000 cc 5 --> status -145 usb-storage: Status code -145; transferred 0/31 usb-storage: -- timeout or NAK usb-storage: Bulk command transfer result=4 usb-storage: -- transport indicates error, resetting usb-storage: usb_stor_Bulk_reset called usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 usb-storage: Soft reset: clearing bulk-in endpoint halt usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Soft reset: clearing bulk-out endpoint halt usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=02 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Soft reset done usb-storage: scsi cmd done, result=0x70000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command MODE_SENSE (6 bytes) usb-storage: 1a 00 3f 00 c0 00 usb-storage: Bulk Command S 0x43425355 T 0x13 L 192 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_buf: xfer 192 bytes usb-storage: Status code 0; transferred 12/192 usb-storage: -- short transfer usb-storage: Bulk data transfer result 0x1 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x13 R 180 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. sda: Write Protect is off sda: Mode Sense: 0b 00 00 08 sda: assuming drive cache: write through sda:<7>usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 00 00 00 00 08 00 usb-storage: Bulk Command S 0x43425355 T 0x14 L 4096 F 128 Trg 0 LUN 0 CL 10 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries vox160-ohci-hcd vox160-ohci-hcd.0: urb 81617800 path 1 ep1in 40120000 cc 4 --> s tatus -32 usb-storage: Status code -32; transferred 0/4096 usb-storage: clearing endpoint halt for pipe 0xc0008280 usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Bulk data transfer result 0x2 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x14 R 4096 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: -- unexpectedly short transfer usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x80000014 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x80000014 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0xf0, key: 0x6, ASC: 0x28, ASCQ: 0x0 usb-storage: (Unknown Key): (unknown ASC/ASCQ) usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 00 00 00 00 08 00 usb-storage: Bulk Command S 0x43425355 T 0x15 L 4096 F 128 Trg 0 LUN 0 CL 10 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries vox160-ohci-hcd vox160-ohci-hcd.0: urb 81617800 path 1 ep1in 40120000 cc 4 --> s tatus -32 usb-storage: Status code -32; transferred 0/4096 usb-storage: clearing endpoint halt for pipe 0xc0008280 usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Bulk data transfer result 0x2 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x15 R 4096 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: -- unexpectedly short transfer usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x80000015 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x80000015 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0xf0, key: 0x6, ASC: 0x28, ASCQ: 0x0 usb-storage: (Unknown Key): (unknown ASC/ASCQ) usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. end_request: I/O error, dev sda, sector 0 Buffer I/O error on device sda, logical block 0 Buffer I/O error on device sda, logical block 0 unable to read partition table Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad LUN (0:1) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (1:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (2:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (3:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (4:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (5:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (6:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (7:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: device scan complete ferred 512/512 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x37 R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 41 00 00 01 00 usb-storage: Bulk Command S 0x43425355 T 0x38 L 512 F 128 Trg 0 LUN 0 CL 10 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x38 R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 42 00 00 01 00 usb-storage: Bulk Command S 0x43425355 T 0x39 L 512 F 128 Trg 0 LUN 0 CL 10 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x39 R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 43 00 00 01 00 usb-storage: Bulk Command S 0x43425355 T 0x3a L 512 F 128 Trg 0 LUN 0 CL 10 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x3a R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 44 00 00 01 00 usb-storage: Bulk Command S 0x43425355 T 0x3b L 512 F 128 Trg 0 LUN 0 CL 10 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x3b R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 45 00 00 01 00 usb-storage: Bulk Command S 0x43425355 T 0x3c L 512 F 128 Trg 0 LUN 0 CL 10 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x3c R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 46 00 00 01 00 usb-storage: Bulk Command S 0x43425355 T 0x3d L 512 F 128 Trg 0 LUN 0 CL 10 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x3d R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 47 00 00 01 00 usb-storage: Bulk Command S 0x43425355 T 0x3e L 512 F 128 Trg 0 LUN 0 CL 10 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x3e R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 48 00 00 01 00 usb-storage: Bulk Command S 0x43425355 T 0x3f L 512 F 128 Trg 0 LUN 0 CL 10 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes vox160-ohci-hcd vox160-ohci-hcd.0: urb 81617740 path 1 ep2out 5c0e0000 cc 5 --> status -145 usb-storage: Status code -145; transferred 0/31 usb-storage: -- timeout or NAK usb-storage: Bulk command transfer result=4 usb-storage: -- transport indicates error, resetting usb-storage: usb_stor_Bulk_reset called usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 usb-storage: Soft reset: clearing bulk-in endpoint halt usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Soft reset: clearing bulk-out endpoint halt usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=02 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Soft reset done usb-storage: scsi cmd done, result=0x70000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 48 00 00 01 00 usb-storage: Bulk Command S 0x43425355 T 0x40 L 512 F 128 Trg 0 LUN 0 CL 10 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries vox160-ohci-hcd vox160-ohci-hcd.0: urb 81617560 path 1 ep1in 40120000 cc 4 --> s tatus -32 usb-storage: Status code -32; transferred 0/512 usb-storage: clearing endpoint halt for pipe 0xc0008280 usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Bulk data transfer result 0x2 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x40 R 512 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: -- unexpectedly short transfer usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x80000040 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x80000040 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0xf0, key: 0x6, ASC: 0x28, ASCQ: 0x0 usb-storage: (Unknown Key): (unknown ASC/ASCQ) usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 48 00 00 01 00 usb-storage: Bulk Command S 0x43425355 T 0x41 L 512 F 128 Trg 0 LUN 0 CL 10 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries vox160-ohci-hcd vox160-ohci-hcd.0: urb 81617560 path 1 ep1in 40120000 cc 4 --> s tatus -32 usb-storage: Status code -32; transferred 0/512 usb-storage: clearing endpoint halt for pipe 0xc0008280 usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Bulk data transfer result 0x2 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x41 R 512 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: -- unexpectedly short transfer usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x80000041 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x80000041 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0xf0, key: 0x6, ASC: 0x28, ASCQ: 0x0 usb-storage: (Unknown Key): (unknown ASC/ASCQ) usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. Doing ls at mount point produces following messages FAT: Directory bread(block 528) failed FAT: Directory bread(block 529) failed FAT: Directory bread(block 530) failed And no files on the disks are visible. Regards Vivek > -----Original Message----- > From: Alan Stern [mailto:[EMAIL PROTECTED] > Sent: Friday, September 08, 2006 3:24 PM > To: Vivek Dharmadhikari > Cc: linux-usb-devel@lists.sourceforge.net > Subject: Re: [linux-usb-devel] 3SYSTEM's POCKET USB DISK does not work > > On Fri, 8 Sep 2006, Vivek Dharmadhikari wrote: > > > Hello > > > > I have problem with a particular type of USB key (3SYSTEM's POCKET > > DISK) on my embedded Linux2.6.12 system. From USB protocol > analyzer I > > saw the USB key device failed to ACK a data packet (size 31 bytes) > > from USB host controller and timeout error occurred. USB host > > controller re-sends the same data packet 3 times and the USB device > > does not send anything to the USB host controller. > > Is the failure to ACK the problem you're worried about? > > > However, this USB storage key works well with PC Linux > 2.6.11(fadora > > core (2.6.11-1.1369_FC4). > > > > The kernel log is attached below > > > > usb 2-1: Product: USB FLASH DISK > > usb 2-1: Manufacturer: 3SYSTEM > > usb 2-1: SerialNumber: 0307110057580 > > scsi0 : SCSI emulation for USB Mass Storage devices > > Vendor: 3SYSTEM Model: USB FLASH DISK Rev: 1.00 > > Type: Direct-Access ANSI SCSI revision: 02 > > SCSI device sda: 512000 512-byte hdwr sectors (262 MB) > > sda: Write Protect is off > > sda: assuming drive cache: write through SCSI device sda: 512000 > > 512-byte hdwr sectors (262 MB) > > sda: Write Protect is off > > sda: assuming drive cache: write through > > /dev/scsi/host0/bus0/target0/lun0:<7>usb-storage: > queuecommand called > > end_request: I/O error, dev sda, sector 0 Buffer I/O error > on device > > sda, logical block 0 Buffer I/O error on device sda, > logical block 0 > > unable to read partition table > > Or is this I/O error the problem? The two are not > necessarily related. > > To find out what's happening, you should compare a kernel log > from the device and a log from a PC running the same version > of the Linux kernel, that is, vanilla 2.6.12 and not Fedora's 2.6.11. > > Also, it would help to increase the size of your kernel's log > buffer. > What you posted was missing some information from the beginning. > > Alan Stern > > ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
