On Wed, 13 Sep 2006, Rafael J. Wysocki wrote:
> Well, I have reproduced it with
> gregkh-usb-usbcore-remove-usb_suspend_root_hub.patch
> reverted too.
>
> Attached is the output of dmesg from the failing case with USB_DEBUG set.
> It covers two attempts to suspend to disk, the second one being unsuccessful,
> with reloading the ohci_hcd module in between. [This kernel also has your
> other patch to prevent the second suspend from failing applied, but it doesn't
> help.]
Okay. Your problem, and probably Mattia's too, is something other than
what that recent patch addressed. I can't tell from the dmesg log exactly
what went wrong, but I can tell you where to look.
In drivers/usb/core/driver.c, resume_device() is not succeeding. That is,
the lines near the end which do
if (status == 0)
udev->dev.power.power_state.event = PM_EVENT_ON;
aren't running during the first resume. You can see this in the dmesg
log; lines 1173-1175 say
usb usb1: resuming
usbdev1.1_ep00: PM: resume from 0, parent usb1 still 1
hub 1-0:1.0: PM: resume from 0, parent usb1 still 1
If power_state.event had gotten set to PM_EVENT_ON then the parent state
would be 0, not 1. This is the source of your problem. During your
second suspend attempt, usb1 didn't get handled correctly because its
state was set wrong. (I suspect the mishandling took place in usbcore
rather than the PM core, but it doesn't matter. The state should not have
been wrong to begin with.) Consequently its parent device 0000:00:13.2
refused to freeze, which aborted the suspend attempt.
For the usb1 device, udriver->resume should point to the generic_resume()
routine in drivers/usb/core/generic.c. In fact, this should be true for
every device that driver.c:resume_device() sees. But generic_resume()
simply calls usb_port_resume() in hub.c, and the log doesn't contain any
of the USB debugging messages that usb_port_resume() would produce. So I
can't tell what happened.
The patch below will add some extra debugging information. We need to
find out why the resume didn't succeed. Oh -- and of course, you should
reinstate all those autosuspend patches. Otherwise this patch won't
apply!
Alan Stern
Index: mm/drivers/usb/core/driver.c
===================================================================
--- mm.orig/drivers/usb/core/driver.c
+++ mm/drivers/usb/core/driver.c
@@ -825,6 +825,7 @@ static int resume_device(struct usb_devi
struct usb_device_driver *udriver;
int status = 0;
+ dev_dbg(&udev->dev, "%s: state %d\n", __FUNCTION__, udev->state);
if (udev->state == USB_STATE_NOTATTACHED ||
udev->state != USB_STATE_SUSPENDED)
goto done;
@@ -839,7 +840,7 @@ static int resume_device(struct usb_devi
status = udriver->resume(udev);
done:
- // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
+ dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
if (status == 0)
udev->dev.power.power_state.event = PM_EVENT_ON;
return status;
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
