On Sunday 24 September 2006 5:18 am, Theodoros V. Kalamatianos wrote: > I have encountered at least 3 hubs (2 usb2 & 1 usb1) that will consume a > lot of power (about 2-2.5W if the laptop power consumption readings are to > be trusted) and heat up a lot (to the point of being too hot to touch for > more than a few seconds) even when no devices are connected, at least on > Linux. I have not tested them on a Windows machine to see if this is the > case there. The USB2 ones used Cypress chips. I do not know what your h/w > config is, but perhaps this is a similar case ?
Probably not unrelated. I have one of those Cypress-based hubs; it's nice except for the heat/power, which precludes using them in bus-powered mode with a laptop (or anything) ... I don't much like wall-warts! It might be too much to expect that when that hub's upstream port is suspended, its power usage goes to something reasonable. ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel