The OHCI bus glue for the Philips PNX chips is missing a few calls.
- Bus suspend/resume were wrongly omitted in the original submission.
- Two new calls were added since that glue was submitted:
* Root hub irq enable call
* Shutdown hook for usbcore
Plus usb_bus.hcpriv has now been removed from usbcore.
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
Index: at91/drivers/usb/host/ohci-pnx4008.c
===================================================================
--- at91.orig/drivers/usb/host/ohci-pnx4008.c 2006-09-30 19:16:13.000000000
-0700
+++ at91/drivers/usb/host/ohci-pnx4008.c 2006-10-02 07:00:48.000000000
-0700
@@ -262,6 +262,7 @@ static const struct hc_driver ohci_pnx40
*/
.start = ohci_pnx4008_start,
.stop = ohci_stop,
+ .shutdown = ohci_shutdown,
/*
* managing i/o requests and associated device resources
@@ -280,7 +281,11 @@ static const struct hc_driver ohci_pnx40
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
-
+ .hub_irq_enable = ohci_rhsc_enable,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
.start_port_reset = ohci_start_port_reset,
};
@@ -410,8 +415,6 @@ static int __devinit usb_hcd_pnx4008_pro
goto out4;
}
- hcd->self.hcpriv = (void *)hcd;
-
pnx4008_start_hc();
platform_set_drvdata(pdev, hcd);
ohci = hcd_to_ohci(hcd);
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
