The USB HID driver doesn't include any code to handle a STALL on the
interrupt endpoint. While this may be uncommon, it does happen
sometimes. This patch (as805) adds a fix.
Signed-off-by: Alan Stern <[EMAIL PROTECTED]>
---
Index: usb-2.6/drivers/usb/input/hid.h
===================================================================
--- usb-2.6.orig/drivers/usb/input/hid.h
+++ usb-2.6/drivers/usb/input/hid.h
@@ -384,6 +384,7 @@ struct hid_control_fifo {
#define HID_IN_RUNNING 3
#define HID_RESET_PENDING 4
#define HID_SUSPENDED 5
+#define HID_CLEAR_HALT 6
struct hid_input {
struct list_head list;
Index: usb-2.6/drivers/usb/input/hid-core.c
===================================================================
--- usb-2.6.orig/drivers/usb/input/hid-core.c
+++ usb-2.6/drivers/usb/input/hid-core.c
@@ -933,20 +933,29 @@ static void hid_retry_timeout(unsigned l
hid_io_error(hid);
}
-/* Workqueue routine to reset the device */
+/* Workqueue routine to reset the device or clear a halt */
static void hid_reset(void *_hid)
{
struct hid_device *hid = (struct hid_device *) _hid;
- int rc_lock, rc;
+ int rc_lock, rc = 0;
- dev_dbg(&hid->intf->dev, "resetting device\n");
- rc = rc_lock = usb_lock_device_for_reset(hid->dev, hid->intf);
- if (rc_lock >= 0) {
- rc = usb_reset_composite_device(hid->dev, hid->intf);
- if (rc_lock)
- usb_unlock_device(hid->dev);
+ if (test_bit(HID_CLEAR_HALT, &hid->iofl)) {
+ dev_dbg(&hid->intf->dev, "clear halt\n");
+ rc = usb_clear_halt(hid->dev, hid->urbin->pipe);
+ clear_bit(HID_CLEAR_HALT, &hid->iofl);
+ hid_start_in(hid);
+ }
+
+ else if (test_bit(HID_RESET_PENDING, &hid->iofl)) {
+ dev_dbg(&hid->intf->dev, "resetting device\n");
+ rc = rc_lock = usb_lock_device_for_reset(hid->dev, hid->intf);
+ if (rc_lock >= 0) {
+ rc = usb_reset_composite_device(hid->dev, hid->intf);
+ if (rc_lock)
+ usb_unlock_device(hid->dev);
+ }
+ clear_bit(HID_RESET_PENDING, &hid->iofl);
}
- clear_bit(HID_RESET_PENDING, &hid->iofl);
switch (rc) {
case 0:
@@ -988,9 +997,8 @@ static void hid_io_error(struct hid_devi
/* Retries failed, so do a port reset */
if (!test_and_set_bit(HID_RESET_PENDING, &hid->iofl)) {
- if (schedule_work(&hid->reset_work))
- goto done;
- clear_bit(HID_RESET_PENDING, &hid->iofl);
+ schedule_work(&hid->reset_work);
+ goto done;
}
}
@@ -1014,6 +1022,11 @@ static void hid_irq_in(struct urb *urb)
hid->retry_delay = 0;
hid_input_report(HID_INPUT_REPORT, urb, 1);
break;
+ case -EPIPE: /* stall */
+ clear_bit(HID_IN_RUNNING, &hid->iofl);
+ set_bit(HID_CLEAR_HALT, &hid->iofl);
+ schedule_work(&hid->reset_work);
+ return;
case -ECONNRESET: /* unlink */
case -ENOENT:
case -ESHUTDOWN: /* unplug */
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
