Every usb serial driver should have a pointer to the corresponding usb driver.
So the usb serial core can add a new id not only to the usb serial driver, but
also to the usb driver.
Also the usb drivers of ark3116, mos7720 and mos7840 missed the flag
no_dynamic_id=1. This is added now.
Signed-off-by: Johannes Hölzl <[EMAIL PROTECTED]>
---
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 8122755..8fb391b 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -568,8 +568,17 @@ static void aircable_unthrottle(struct u
schedule_work(&priv->rx_work);
}
+static struct usb_driver aircable_driver = {
+ .name = "aircable",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+ .no_dynamic_id = 1,
+};
+
static struct usb_serial_driver aircable_device = {
.description = "aircable",
+ .usb_driver = &aircable_driver,
.id_table = id_table,
.num_ports = 1,
.attach = aircable_attach,
@@ -583,13 +592,6 @@ static struct usb_serial_driver aircable
.unthrottle = aircable_unthrottle,
};
-static struct usb_driver aircable_driver = {
- .name = "aircable",
- .probe = usb_serial_probe,
- .disconnect = usb_serial_disconnect,
- .id_table = id_table,
-};
-
static int __init aircable_init (void)
{
int retval;
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index 7f5d546..4c6b5fb 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -273,6 +273,7 @@ static struct usb_serial_driver airprime
.owner = THIS_MODULE,
.name = "airprime",
},
+ .usb_driver = &airprime_driver,
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index ca52f12..f150b1d 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -445,6 +445,7 @@ static struct usb_driver ark3116_driver
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table,
+ .no_dynamic_id = 1,
};
static struct usb_serial_driver ark3116_device = {
@@ -453,6 +454,7 @@ static struct usb_serial_driver ark3116_
.name = "ark3116",
},
.id_table = id_table,
+ .usb_driver = &ark3116_driver,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.num_bulk_out = 1,
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 8835bb5..0a2eb52 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -126,6 +126,7 @@ static struct usb_serial_driver belkin_d
.name = "belkin",
},
.description = "Belkin / Peracom / GoHubs USB Serial Adapter",
+ .usb_driver = &belkin_driver,
.id_table = id_table_combined,
.num_interrupt_in = 1,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index f95d42c..c3cdca5 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -88,6 +88,7 @@ static struct usb_serial_driver cp2101_d
.owner = THIS_MODULE,
.name = "cp2101",
},
+ .usb_driver = &cp2101_driver,
.id_table = id_table,
.num_interrupt_in = 0,
.num_bulk_in = 0,
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index a63c328..4167753 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -88,6 +88,7 @@ static struct usb_serial_driver cyberjac
.name = "cyberjack",
},
.description = "Reiner SCT Cyberjack USB card reader",
+ .usb_driver = &cyberjack_driver,
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
@@ -98,7 +99,7 @@ static struct usb_serial_driver cyberjac
.open = cyberjack_open,
.close = cyberjack_close,
.write = cyberjack_write,
- .write_room = cyberjack_write_room,
+ .write_room = cyberjack_write_room,
.read_int_callback = cyberjack_read_int_callback,
.read_bulk_callback = cyberjack_read_bulk_callback,
.write_bulk_callback = cyberjack_write_bulk_callback,
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index f2e89a0..4e40546 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -193,6 +193,7 @@ static struct usb_serial_driver cypress_
.name = "earthmate",
},
.description = "DeLorme Earthmate USB",
+ .usb_driver = &cypress_driver,
.id_table = id_table_earthmate,
.num_interrupt_in = 1,
.num_interrupt_out = 1,
@@ -222,6 +223,7 @@ static struct usb_serial_driver cypress_
.name = "cyphidcom",
},
.description = "HID->COM RS232 Adapter",
+ .usb_driver = &cypress_driver,
.id_table = id_table_cyphidcomrs232,
.num_interrupt_in = 1,
.num_interrupt_out = 1,
@@ -251,6 +253,7 @@ static struct usb_serial_driver cypress_
.name = "nokiaca42v2",
},
.description = "Nokia CA-42 V2 Adapter",
+ .usb_driver = &cypress_driver,
.id_table = id_table_nokiaca42v2,
.num_interrupt_in = 1,
.num_interrupt_out = 1,
diff --git a/drivers/usb/serial/digi_acceleport.c
b/drivers/usb/serial/digi_acceleport.c
index bdb5810..36e9306 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -508,6 +508,7 @@ static struct usb_serial_driver digi_acc
.name = "digi_2",
},
.description = "Digi 2 port USB adapter",
+ .usb_driver = &digi_driver,
.id_table = id_table_2,
.num_interrupt_in = 0,
.num_bulk_in = 4,
@@ -537,6 +538,7 @@ static struct usb_serial_driver digi_acc
.name = "digi_4",
},
.description = "Digi 4 port USB adapter",
+ .usb_driver = &digi_driver,
.id_table = id_table_4,
.num_interrupt_in = 0,
.num_bulk_in = 5,
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 4ce10a8..2641c40 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -117,6 +117,7 @@ static struct usb_serial_driver empeg_de
.name = "empeg",
},
.id_table = id_table,
+ .usb_driver = &empeg_driver,
.num_interrupt_in = 0,
.num_bulk_in = 1,
.num_bulk_out = 1,
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index c186b4e..0c4c56d 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -613,6 +613,7 @@ static struct usb_serial_driver ftdi_sio
.name = "ftdi_sio",
},
.description = "FTDI USB Serial Device",
+ .usb_driver = &ftdi_driver ,
.id_table = id_table_combined,
.num_interrupt_in = 0,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c
index 77b9772..60305fc 100644
--- a/drivers/usb/serial/funsoft.c
+++ b/drivers/usb/serial/funsoft.c
@@ -35,6 +35,7 @@ static struct usb_serial_driver funsoft_
.name = "funsoft",
},
.id_table = id_table,
+ .usb_driver = &funsoft_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 4543152..83f5fc6 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1567,6 +1567,7 @@ static struct usb_serial_driver garmin_d
.name = "garmin_gps",
},
.description = "Garmin GPS usb/tty",
+ .usb_driver = &garmin_driver,
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 3604293..601e064 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -20,6 +20,10 @@ #include <linux/usb.h>
#include <linux/usb/serial.h>
#include <asm/uaccess.h>
+static int generic_probe(struct usb_interface *interface,
+ const struct usb_device_id *id);
+
+
static int debug;
#ifdef CONFIG_USB_SERIAL_GENERIC
@@ -34,6 +38,21 @@ MODULE_PARM_DESC(product, "User specifie
static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */
+/* we want to look at all devices, as the vendor/product id can change
+ * depending on the command line argument */
+static struct usb_device_id generic_serial_ids[] = {
+ {.driver_info = 42},
+ {}
+};
+
+static struct usb_driver generic_driver = {
+ .name = "usbserial_generic",
+ .probe = generic_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = generic_serial_ids,
+ .no_dynamic_id = 1,
+};
+
/* All of the device info needed for the Generic Serial Converter */
struct usb_serial_driver usb_serial_generic_device = {
.driver = {
@@ -41,6 +60,7 @@ struct usb_serial_driver usb_serial_gene
.name = "generic",
},
.id_table = generic_device_ids,
+ .usb_driver = &generic_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
@@ -48,13 +68,6 @@ struct usb_serial_driver usb_serial_gene
.shutdown = usb_serial_generic_shutdown,
};
-/* we want to look at all devices, as the vendor/product id can change
- * depending on the command line argument */
-static struct usb_device_id generic_serial_ids[] = {
- {.driver_info = 42},
- {}
-};
-
static int generic_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
@@ -65,14 +78,6 @@ static int generic_probe(struct usb_inte
return usb_serial_probe(interface, id);
return -ENODEV;
}
-
-static struct usb_driver generic_driver = {
- .name = "usbserial_generic",
- .probe = generic_probe,
- .disconnect = usb_serial_disconnect,
- .id_table = generic_serial_ids,
- .no_dynamic_id = 1,
-};
#endif
int usb_serial_generic_register (int _debug)
diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c
index ebcac70..6c6ebae 100644
--- a/drivers/usb/serial/hp4x.c
+++ b/drivers/usb/serial/hp4x.c
@@ -49,6 +49,7 @@ static struct usb_serial_driver hp49gp_d
.name = "hp4X",
},
.id_table = id_table,
+ .usb_driver = &hp49gp_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 91bd301..33885ea 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -240,14 +240,6 @@ static void edge_shutdown (struct usb_s
#include "io_tables.h" /* all of the devices that this driver supports */
-static struct usb_driver io_driver = {
- .name = "io_edgeport",
- .probe = usb_serial_probe,
- .disconnect = usb_serial_disconnect,
- .id_table = id_table_combined,
- .no_dynamic_id = 1,
-};
-
/* function prototypes for all of our local functions */
static void process_rcvd_data (struct edgeport_serial *edge_serial,
unsigned char *buffer, __u16 bufferLength);
static void process_rcvd_status (struct edgeport_serial
*edge_serial, __u8 byte2, __u8 byte3);
diff --git a/drivers/usb/serial/io_tables.h b/drivers/usb/serial/io_tables.h
index fad561c..e3d0283 100644
--- a/drivers/usb/serial/io_tables.h
+++ b/drivers/usb/serial/io_tables.h
@@ -75,12 +75,21 @@ static struct usb_device_id id_table_com
MODULE_DEVICE_TABLE (usb, id_table_combined);
+static struct usb_driver io_driver = {
+ .name = "io_edgeport",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table_combined,
+ .no_dynamic_id = 1,
+};
+
static struct usb_serial_driver edgeport_2port_device = {
.driver = {
.owner = THIS_MODULE,
.name = "edgeport_2",
},
.description = "Edgeport 2 port adapter",
+ .usb_driver = &io_driver,
.id_table = edgeport_2port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
@@ -111,6 +120,7 @@ static struct usb_serial_driver edgeport
.name = "edgeport_4",
},
.description = "Edgeport 4 port adapter",
+ .usb_driver = &io_driver,
.id_table = edgeport_4port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
@@ -141,6 +151,7 @@ static struct usb_serial_driver edgeport
.name = "edgeport_8",
},
.description = "Edgeport 8 port adapter",
+ .usb_driver = &io_driver,
.id_table = edgeport_8port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index ee0c921..7a6f47e 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2979,6 +2979,7 @@ static struct usb_serial_driver edgeport
.name = "edgeport_ti_1",
},
.description = "Edgeport TI 1 port adapter",
+ .usb_driver = &io_driver,
.id_table = edgeport_1port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
@@ -3009,6 +3010,7 @@ static struct usb_serial_driver edgeport
.name = "edgeport_ti_2",
},
.description = "Edgeport TI 2 port adapter",
+ .usb_driver = &io_driver,
.id_table = edgeport_2port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 2,
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index d72cf8b..12cac72 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -563,6 +563,7 @@ static struct usb_serial_driver ipaq_dev
.name = "ipaq",
},
.description = "PocketPC PDA",
+ .usb_driver = &ipaq_driver,
.id_table = ipaq_id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 2a4bb66..9d02628 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -443,6 +443,7 @@ static struct usb_serial_driver ipw_devi
.name = "ipw",
},
.description = "IPWireless converter",
+ .usb_driver = &usb_ipw_driver,
.id_table = usb_ipw_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 331bf81..a4f37bc 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -138,6 +138,7 @@ static struct usb_serial_driver ir_devic
.name = "ir-usb",
},
.description = "IR Dongle",
+ .usb_driver = &ir_driver,
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 7472ed6..c047ca8 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -576,6 +576,7 @@ static struct usb_serial_driver keyspan_
.name = "keyspan_no_firm",
},
.description = "Keyspan - (without firmware)",
+ .usb_driver = &keyspan_driver,
.id_table = keyspan_pre_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -590,6 +591,7 @@ static struct usb_serial_driver keyspan_
.name = "keyspan_1",
},
.description = "Keyspan 1 port adapter",
+ .usb_driver = &keyspan_driver,
.id_table = keyspan_1port_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -617,6 +619,7 @@ static struct usb_serial_driver keyspan_
.name = "keyspan_2",
},
.description = "Keyspan 2 port adapter",
+ .usb_driver = &keyspan_driver,
.id_table = keyspan_2port_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -644,6 +647,7 @@ static struct usb_serial_driver keyspan_
.name = "keyspan_4",
},
.description = "Keyspan 4 port adapter",
+ .usb_driver = &keyspan_driver,
.id_table = keyspan_4port_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 5,
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 9090051..a479453 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -787,6 +787,7 @@ static struct usb_serial_driver keyspan_
.name = "keyspan_pda_pre",
},
.description = "Keyspan PDA - (prerenumeration)",
+ .usb_driver = &keyspan_pda_driver,
.id_table = id_table_fake,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -803,6 +804,7 @@ static struct usb_serial_driver xircom_p
.name = "xircom_no_firm",
},
.description = "Xircom / Entregra PGS - (prerenumeration)",
+ .usb_driver = &keyspan_pda_driver,
.id_table = id_table_fake_xircom,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -818,6 +820,7 @@ static struct usb_serial_driver keyspan_
.name = "keyspan_pda",
},
.description = "Keyspan PDA",
+ .usb_driver = &keyspan_pda_driver,
.id_table = id_table_std,
.num_interrupt_in = 1,
.num_bulk_in = 0,
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 17e2056..0396e40 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -128,6 +128,7 @@ static struct usb_serial_driver kl5kusb1
.name = "kl5kusb105d",
},
.description = "KL5KUSB105D / PalmConnect",
+ .usb_driver = &kl5kusb105d_driver,
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index ff03331..b2e3c7e 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -110,6 +110,7 @@ static struct usb_serial_driver kobil_de
.name = "kobil",
},
.description = "KOBIL USB smart card terminal",
+ .usb_driver = &kobil_driver,
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 0,
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index b7582cc..0993f7f 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -137,6 +137,7 @@ static struct usb_serial_driver mct_u232
.name = "mct_u232",
},
.description = "MCT U232",
+ .usb_driver = &mct_u232_driver,
.id_table = id_table_combined,
.num_interrupt_in = 2,
.num_bulk_in = 0,
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 82cd15b..0732ad3 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1605,12 +1605,21 @@ static void mos7720_shutdown(struct usb_
usb_set_serial_data(serial, NULL);
}
+static struct usb_driver usb_driver = {
+ .name = "moschip7720",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = moschip_port_id_table,
+ .no_dynamic_id = 1,
+};
+
static struct usb_serial_driver moschip7720_2port_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "moschip7720",
},
.description = "Moschip 2 port adapter",
+ .usb_driver = &usb_driver,
.id_table = moschip_port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 2,
@@ -1631,13 +1640,6 @@ static struct usb_serial_driver moschip7
.read_bulk_callback = mos7720_bulk_in_callback,
};
-static struct usb_driver usb_driver = {
- .name = "moschip7720",
- .probe = usb_serial_probe,
- .disconnect = usb_serial_disconnect,
- .id_table = moschip_port_id_table,
-};
-
static int __init moschip7720_init(void)
{
int retval;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 5b71962..2ca5445 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -2841,12 +2841,21 @@ static void mos7840_shutdown(struct usb_
}
+static struct usb_driver io_driver = {
+ .name = "mos7840",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = moschip_id_table_combined,
+ .no_dynamic_id = 1,
+};
+
static struct usb_serial_driver moschip7840_4port_device = {
.driver = {
.owner = THIS_MODULE,
.name = "mos7840",
},
.description = DRIVER_DESC,
+ .usb_driver = &io_driver,
.id_table = moschip_port_id_table,
.num_interrupt_in = 1, //NUM_DONT_CARE,//1,
#ifdef check
@@ -2876,13 +2885,6 @@ #endif
.read_int_callback = mos7840_interrupt_callback,
};
-static struct usb_driver io_driver = {
- .name = "mos7840",
- .probe = usb_serial_probe,
- .disconnect = usb_serial_disconnect,
- .id_table = moschip_id_table_combined,
-};
-
/****************************************************************************
* moschip7840_init
* This is called by the module subsystem, or on startup to initialize us
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index 0610409..7cc6791 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -120,6 +120,7 @@ static struct usb_serial_driver navman_d
.name = "navman",
},
.id_table = id_table,
+ .usb_driver = &navman_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index bc91d3b..0216ac1 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -93,6 +93,7 @@ static struct usb_serial_driver zyxel_om
.name = "omninet",
},
.description = "ZyXEL - omni.net lcd plus usb",
+ .usb_driver = &omninet_driver,
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 130afbb..b78ad0e 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -129,6 +129,7 @@ static struct usb_serial_driver option_1
.name = "option1",
},
.description = "GSM modem (1-port)",
+ .usb_driver = &option_driver,
.id_table = option_ids1,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index bc800c8..8f97876 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -1118,6 +1118,7 @@ static struct usb_serial_driver pl2303_d
.name = "pl2303",
},
.id_table = id_table,
+ .usb_driver = &pl2303_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 1,
.num_bulk_out = 1,
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index 30b7ebc..5a03a3f 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -402,6 +402,7 @@ static struct usb_serial_driver safe_dev
.name = "safe_serial",
},
.id_table = id_table,
+ .usb_driver = &safe_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 4b5097f..52b56e9 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -614,6 +614,7 @@ static struct usb_serial_driver sierra_1
},
.description = "Sierra USB modem (1 port)",
.id_table = id_table_1port,
+ .usb_driver = &sierra_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 1,
.num_bulk_out = 1,
@@ -642,6 +643,7 @@ static struct usb_serial_driver sierra_3
},
.description = "Sierra USB modem (3 port)",
.id_table = id_table_3port,
+ .usb_driver = &sierra_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 3,
.num_bulk_out = 3,
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c
b/drivers/usb/serial/ti_usb_3410_5052.c
index 07400c0..adf15a3 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -260,6 +260,7 @@ static struct usb_serial_driver ti_1port
.name = "ti_usb_3410_5052_1",
},
.description = "TI USB 3410 1 port adapter",
+ .usb_driver = &ti_usb_driver,
.id_table = ti_id_table_3410,
.num_interrupt_in = 1,
.num_bulk_in = 1,
@@ -290,6 +291,7 @@ static struct usb_serial_driver ti_2port
.name = "ti_usb_3410_5052_2",
},
.description = "TI USB 5052 2 port adapter",
+ .usb_driver = &ti_usb_driver,
.id_table = ti_id_table_5052,
.num_interrupt_in = 1,
.num_bulk_in = 2,
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index befe2e1..fa5fe1d 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -189,6 +189,7 @@ static struct usb_serial_driver handspri
.name = "visor",
},
.description = "Handspring Visor / Palm OS",
+ .usb_driver = &visor_driver,
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 2,
@@ -219,6 +220,7 @@ static struct usb_serial_driver clie_5_d
.name = "clie_5",
},
.description = "Sony Clie 5.0",
+ .usb_driver = &visor_driver,
.id_table = clie_id_5_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 2,
@@ -249,6 +251,7 @@ static struct usb_serial_driver clie_3_5
.name = "clie_3.5",
},
.description = "Sony Clie 3.5",
+ .usb_driver = &visor_driver,
.id_table = clie_id_3_5_table,
.num_interrupt_in = 0,
.num_bulk_in = 1,
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 4d1cd7a..5b6ade8 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -161,6 +161,7 @@ static struct usb_serial_driver whitehea
.name = "whiteheatnofirm",
},
.description = "Connect Tech - WhiteHEAT - (prerenumeration)",
+ .usb_driver = &whiteheat_driver,
.id_table = id_table_prerenumeration,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
@@ -176,6 +177,7 @@ static struct usb_serial_driver whitehea
.name = "whiteheat",
},
.description = "Connect Tech - WhiteHEAT",
+ .usb_driver = &whiteheat_driver,
.id_table = id_table_std,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
