Hi,
I'm seeing an strange problem when trying to eject my ipod. To try to
isolate the problem, I've done the following in single-mode and with
USB_STORAGE_DEBUG (dmesg attached). I couldn't figure out how to start
the logging, so the attached is the latest output I got.
Anyways, I'm trying to simply connect the iPod and then eject it,
without even mounting it. When I connect it, it correctly shows up
in /dev/sda1 and /dev/sda2 (the second being the important one). If I
do:
eject /dev/sda
immediately, or within a minute or so, the iPod is ejected correctly (at
least it thinks so :) ). If I wait a few minutes, a get 4 or so
usb 4-4: reset high speed USB device using ehci_hcd and address 4
before
sd 2:0:0:0: scsi: Device offlined - not ready after error recovery
Now, if after waiting a few minutes, I don't do eject immediately but
instead do 'fdisk -l' first, the iPod is ejected properly.
Any ideas?
Thanks,
Carlos
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x42 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x42 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
usb-storage: 1e 00 00 00 01 00
usb-storage: Bulk Command S 0x43425355 T 0x43 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x43 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command START_STOP (6 bytes)
usb-storage: 1b 00 00 00 02 00
usb-storage: Bulk Command S 0x43425355 T 0x44 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x44 R 0 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0x45 L 18 F 128 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x45 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0xf0, key: 0x5, ASC: 0x53, ASCQ: 0x2
usb-storage: Illegal Request: Medium removal prevented
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
usb-storage: 1e 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x46 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x46 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command START_STOP (6 bytes)
usb-storage: 1b 00 00 00 01 00
usb-storage: Bulk Command S 0x43425355 T 0x47 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: command_abort called
usb-storage: usb_stor_stop_transport called
usb-storage: -- cancelling URB
usb-storage: Status code -104; transferred 0/13
usb-storage: -- transfer cancelled
usb-storage: Bulk status result = 4
usb-storage: -- command was aborted
usb-storage: storage_pre_reset
usb 4-4: reset high speed USB device using ehci_hcd and address 4
usb-storage: storage_post_reset
usb-storage: usb_reset_composite_device returns 0
usb-storage: scsi command aborted
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x48 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: command_abort called
usb-storage: usb_stor_stop_transport called
usb-storage: -- cancelling URB
usb-storage: Status code -104; transferred 0/31
usb-storage: -- transfer cancelled
usb-storage: Bulk command transfer result=4
usb-storage: -- command was aborted
usb-storage: storage_pre_reset
usb 4-4: reset high speed USB device using ehci_hcd and address 4
usb-storage: storage_post_reset
usb-storage: usb_reset_composite_device returns 0
usb-storage: scsi command aborted
usb-storage: *** thread sleeping.
usb-storage: device_reset called
usb-storage: usb_stor_Bulk_reset called
usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
usb-storage: Soft reset: clearing bulk-in endpoint halt
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=82 len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: Soft reset: clearing bulk-out endpoint halt
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=01 len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: Soft reset done
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x49 L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: command_abort called
usb-storage: usb_stor_stop_transport called
usb-storage: -- cancelling URB
usb-storage: Status code -104; transferred 0/31
usb-storage: -- transfer cancelled
usb-storage: Bulk command transfer result=4
usb-storage: -- command was aborted
usb-storage: storage_pre_reset
usb 4-4: reset high speed USB device using ehci_hcd and address 4
usb-storage: storage_post_reset
usb-storage: usb_reset_composite_device returns 0
usb-storage: scsi command aborted
usb-storage: *** thread sleeping.
usb-storage: bus_reset called
usb-storage: storage_pre_reset
usb 4-4: reset high speed USB device using ehci_hcd and address 4
usb-storage: storage_post_reset
usb-storage: usb_reset_composite_device returns 0
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x4a L 0 F 0 Trg 0 LUN 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: command_abort called
usb-storage: usb_stor_stop_transport called
usb-storage: -- cancelling URB
usb-storage: Status code -104; transferred 0/31
usb-storage: -- transfer cancelled
usb-storage: Bulk command transfer result=4
usb-storage: -- command was aborted
usb-storage: storage_pre_reset
usb 4-4: reset high speed USB device using ehci_hcd and address 4
usb-storage: storage_post_reset
usb-storage: usb_reset_composite_device returns 0
usb-storage: scsi command aborted
usb-storage: *** thread sleeping.
sd 2:0:0:0: scsi: Device offlined - not ready after error recovery
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
