Hi, I can't scan anymore. :-( I don't know which rc kernel introduced it, but this are the messages I get (w/o touching the device/usb cable except pluggin it in for the first time):
usb 1-1.2: new full speed USB device using ehci_hcd and address 4 ehci_hcd 0000:00:0b.1: qh ffff81007bc6c280 (#00) state 4 usb 1-1.2: configuration #1 chosen from 1 choice usb 1-1.2: USB disconnect, address 4 usb 1-1.2: new full speed USB device using ehci_hcd and address 5 usb 1-1.2: configuration #1 chosen from 1 choice usb 1-1.2: USB disconnect, address 5 usb 1-1.2: new full speed USB device using ehci_hcd and address 6 usb 1-1.2: configuration #1 chosen from 1 choice usb 1-1.2: USB disconnect, address 6 usb 1-1.2: new full speed USB device using ehci_hcd and address 7 usb 1-1.2: configuration #1 chosen from 1 choice usb 1-1.2: USB disconnect, address 7 usb 1-1.2: new full speed USB device using ehci_hcd and address 8 usb 1-1.2: configuration #1 chosen from 1 choice Shouldn't the ohci module handle the scanner? The scanner is connected through a hub. I don't remember how 2.6.19 handled it, or whether I used some new exotic setting which causes the breakage. Well, I'll test this week-end and upload more infos then. If you already have some ideas in the meantime, let me know. BTW, a usb2.0 card reader (connected through the same hub) works w/o problems... -- (°= =°) //\ Prakash Punnoor /\\ V_/ \_V
pgpGQ9kMglnQC.pgp
Description: PGP signature
------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
