Hello Pete, > > I use 2.6.19.1 kernel on the laptop 'compaq nc6320'. While booting the > > kernel, I see the following error: > > usb 1-1: device not accepting address 2, error -71 > > I saw this. But there was no indication if any other kernel works. > It's just busted hardware most likely. I decided not to reply until > it gets a little clearer.
Ok, this is a new laptop which came with WinXP installed. I have no way to figure out whether WinXP had errors with the same usb controller, but I didn't see any visible errors. I then installed fedora core 6 on this laptop. The same problem happened with the stock kernel (2.6.18-1.2868). I then installed '2.6.19.1' on this box & the problem exists. If you suspect the hardware might be buggy, do you think there is some way to isolate the issue? Thanks, --Vasu ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
