According to the Bulk-Only spec, usb-storage is supposed to use the
_first_ bulk-in and bulk-out endpoints it finds, not the _last_. And
while we're at it, we ought to test the direction of the interrupt
endpoint as well. This patch (as842) makes both changes.
Signed-off-by: Alan Stern <[EMAIL PROTECTED]>
---
This never mattered until just recently, when a user ran across a
mass-storage device with 2 bulk-in and 2 bulk-out endpoints, and we were
trying to use the wrong ones.
Pete, you probably will want to make a similar change to ub.
Alan Stern
Index: usb-2.6/drivers/usb/storage/usb.c
===================================================================
--- usb-2.6.orig/drivers/usb/storage/usb.c
+++ usb-2.6/drivers/usb/storage/usb.c
@@ -731,26 +731,27 @@ static int get_pipes(struct us_data *us)
struct usb_endpoint_descriptor *ep_int = NULL;
/*
- * Find the endpoints we need.
+ * Find the first endpoint of each type we need.
* We are expecting a minimum of 2 endpoints - in and out (bulk).
- * An optional interrupt is OK (necessary for CBI protocol).
+ * An optional interrupt-in is OK (necessary for CBI protocol).
* We will ignore any others.
*/
for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
ep = &altsetting->endpoint[i].desc;
- /* Is it a BULK endpoint? */
if (usb_endpoint_xfer_bulk(ep)) {
- /* BULK in or out? */
- if (usb_endpoint_dir_in(ep))
- ep_in = ep;
- else
- ep_out = ep;
+ if (usb_endpoint_dir_in(ep)) {
+ if (!ep_in)
+ ep_in = ep;
+ } else {
+ if (!ep_out)
+ ep_out = ep;
+ }
}
- /* Is it an interrupt endpoint? */
- else if (usb_endpoint_xfer_int(ep)) {
- ep_int = ep;
+ else if (usb_endpoint_is_int_in(ep)) {
+ if (!ep_int)
+ ep_int = ep;
}
}
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
