On Thu, Jan 25, 2007 at 02:29:01PM -0800, Greg KH wrote: > > The default mode presents an SDcard interface, class 8, Mass Storage, > > to the kernel, which usually snaps it right up. The interface used > > by the Windows software to read contacts and calendar items, etc, > > is a class 0xFF. This class doesn't always show up in the lsusb -v > > list. > > How does it switch between the two modes, is it a user driven switch, or > is it another "magical command" type thing?
I suspect it is another "magical command." Ideally the Pearl should show up with both class 8 and class FF configurations, but by default it only seems to show class 8. Yet in Windows captures I've seen, there is definitely a class FF in there somewhere, so something magical is happening. > > So I strongly suspect there will be a similar handshake for the Pearl > > just to get it to show both classes on its lsusb -v listing. When I figure > > that out, I'll let you know or send a patch. > > Please do, if you just send the info, that should be all that I need to > add this to the driver. So for now I'll hold off adding that device id. Will do. - Chris ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
