From: Alan Stern <[EMAIL PROTECTED]>
This patch (as709) changes the way ehci-hcd presents port status
values for ports owned by the companion controller. It no longer
hides the information; in particular, it allows the core to see the
disconnect event that occurs when a full- or low-speed device is
switched over to the companion. This is required for the next patch
in this series.
Signed-off-by: Alan Stern <[EMAIL PROTECTED]>
Cc: David Brownell <[EMAIL PROTECTED]>
Signed-off-by: Greg Kroah-Hartman <[EMAIL PROTECTED]>
---
drivers/usb/host/ehci-hub.c | 64 +++++++++++++++++++++++-------------------
1 files changed, 35 insertions(+), 29 deletions(-)
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 12f881f..076474d 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -270,16 +270,14 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
spin_lock_irqsave (&ehci->lock, flags);
for (i = 0; i < ports; i++) {
temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
- if (temp & PORT_OWNER) {
- /* don't report this in GetPortStatus */
- if (temp & PORT_CSC) {
- temp &= ~PORT_RWC_BITS;
- temp |= PORT_CSC;
- ehci_writel(ehci, temp,
- &ehci->regs->port_status [i]);
- }
- continue;
- }
+
+ /*
+ * Return status information even for ports with OWNER set.
+ * Otherwise khubd wouldn't see the disconnect event when a
+ * high-speed device is switched over to the companion
+ * controller by the user.
+ */
+
if (!(temp & PORT_CONNECT))
ehci->reset_done [i] = 0;
if ((temp & mask) != 0
@@ -377,8 +375,13 @@ static int ehci_hub_control (
goto error;
wIndex--;
temp = ehci_readl(ehci, status_reg);
- if (temp & PORT_OWNER)
- break;
+
+ /*
+ * Even if OWNER is set, so the port is owned by the
+ * companion controller, khubd needs to be able to clear
+ * the port-change status bits (especially
+ * USB_PORT_FEAT_C_CONNECTION).
+ */
switch (wValue) {
case USB_PORT_FEAT_ENABLE:
@@ -501,24 +504,27 @@ static int ehci_hub_control (
ehci_readl(ehci, status_reg));
}
- // don't show wPortStatus if it's owned by a companion hc
- if (!(temp & PORT_OWNER)) {
- if (temp & PORT_CONNECT) {
- status |= 1 << USB_PORT_FEAT_CONNECTION;
- // status may be from integrated TT
- status |= ehci_port_speed(ehci, temp);
- }
- if (temp & PORT_PE)
- status |= 1 << USB_PORT_FEAT_ENABLE;
- if (temp & (PORT_SUSPEND|PORT_RESUME))
- status |= 1 << USB_PORT_FEAT_SUSPEND;
- if (temp & PORT_OC)
- status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
- if (temp & PORT_RESET)
- status |= 1 << USB_PORT_FEAT_RESET;
- if (temp & PORT_POWER)
- status |= 1 << USB_PORT_FEAT_POWER;
+ /*
+ * Even if OWNER is set, there's no harm letting khubd
+ * see the wPortStatus values (they should all be 0 except
+ * for PORT_POWER anyway).
+ */
+
+ if (temp & PORT_CONNECT) {
+ status |= 1 << USB_PORT_FEAT_CONNECTION;
+ // status may be from integrated TT
+ status |= ehci_port_speed(ehci, temp);
}
+ if (temp & PORT_PE)
+ status |= 1 << USB_PORT_FEAT_ENABLE;
+ if (temp & (PORT_SUSPEND|PORT_RESUME))
+ status |= 1 << USB_PORT_FEAT_SUSPEND;
+ if (temp & PORT_OC)
+ status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
+ if (temp & PORT_RESET)
+ status |= 1 << USB_PORT_FEAT_RESET;
+ if (temp & PORT_POWER)
+ status |= 1 << USB_PORT_FEAT_POWER;
#ifndef EHCI_VERBOSE_DEBUG
if (status & ~0xffff) /* only if wPortChange is interesting */
--
1.4.4.4
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
