From: David Brownell <[EMAIL PROTECTED]>

Hmm, I noticed that support for one of the USB host-to-host cables
never got fully merged ... Kconfig wouldn't show it!  Fixed.

Also, changed the CDC Subset default to 'y' so that more of these
cables will work out-of-the-box.

Signed-off-by: David Brownell <[EMAIL PROTECTED]>
Signed-off-by: Greg Kroah-Hartman <[EMAIL PROTECTED]>
---
 drivers/usb/net/Kconfig      |    8 ++++++++
 drivers/usb/net/cdc_subset.c |    5 +++++
 2 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig
index 5b7fed7..0f3d7db 100644
--- a/drivers/usb/net/Kconfig
+++ b/drivers/usb/net/Kconfig
@@ -240,6 +240,7 @@ config USB_NET_RNDIS_HOST
 config USB_NET_CDC_SUBSET
        tristate "Simple USB Network Links (CDC Ethernet subset)"
        depends on USB_USBNET
+       default y
        help
          This driver module supports USB network devices that can work
          without any device-specific information.  Select it if you have
@@ -299,6 +300,13 @@ config USB_EPSON2888
          Choose this option to support the usb networking links used
          by some sample firmware from Epson.
 
+config USB_KC2190
+       boolean "KT Technology KC2190 based cables (InstaNet)"
+       depends on USB_NET_CDC_SUBSET && EXPERIMENTAL
+       help
+         Choose this option if you're using a host-to-host cable
+         with one of these chips.
+
 config USB_NET_ZAURUS
        tristate "Sharp Zaurus (stock ROMs) and compatible"
        depends on USB_USBNET
diff --git a/drivers/usb/net/cdc_subset.c b/drivers/usb/net/cdc_subset.c
index 6e3fead..bc62b01 100644
--- a/drivers/usb/net/cdc_subset.c
+++ b/drivers/usb/net/cdc_subset.c
@@ -165,6 +165,11 @@ static const struct driver_info    epson2888_info = {
 #endif /* CONFIG_USB_EPSON2888 */
 
 
+/*-------------------------------------------------------------------------
+ *
+ * info from Jonathan McDowell <[EMAIL PROTECTED]>
+ *
+ *-------------------------------------------------------------------------*/
 #ifdef CONFIG_USB_KC2190
 #define HAVE_HARDWARE
 static const struct driver_info kc2190_info = {
-- 
1.5.0


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to