Hi all
I am facing some strange problem regarding wi-fi 3com adapter on my
PXA270. khubd detects the device and attaches the driver(zd1211rw.ko)
too but
gives "hubd timed out" error after loading the required firmwares. I am
sure that firmwares are loading properly as I included some debug messages
in the driver. Another thing is its not always gives the same error;
some times ( around 1 out of 3 attempts) it works properly and creats
eth0 interface.
I am unable to figure it out bcos of this inconsistency. Anybody has
idea on how to go further.
Thanks in Advance
Here is the dmesg:
hub 1-0:1.0: state 8 ports 1 chg 0000 evt 0000
usb usb1: usb auto-resume
usb usb1: finish resume
hub 1-0:1.0: hub_resume
pxa27x-ohci pxa27x-ohci: wakeup root hub
pxa27x-ohci pxa27x-ohci: GetStatus roothub.portstatus [0] = 0x00010101
CSC PPS CCS
hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
pxa27x-ohci pxa27x-ohci: GetStatus roothub.portstatus [0] = 0x00100103
PRSC PPS PES CCS
usb 1-1: new full speed USB device using pxa27x-ohci and address 27
pxa27x-ohci pxa27x-ohci: GetStatus roothub.portstatus [0] = 0x00100103
PRSC PPS PES CCS
usb 1-1: default language 0x0409
usb 1-1: new device strings: Mfr=16, Product=32, SerialNumber=0
usb 1-1: Product: 3CRUSB10075
usb 1-1: Manufacturer: 3COM
usb 1-1: uevent
usb 1-1: usb_probe_device
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: uevent
zd1211rw 1-1:1.0: usb_probe_interface
zd1211rw 1-1:1.0: usb_probe_interface - got id
usb 1-1: print_id() 6891:a727 v4330 full
zd1211rw 1-1:1.0: zd_netdev_alloc() netdev->flags 0x1002
zd1211rw 1-1:1.0: zd_netdev_alloc() netdev->features 0x00000000
usb 1-1: request_fw_file() fw name zd1211/zd1211_ub
usb 1-1: upload_firmware() firmware device id 0x4330 is equal to the
actual device id
usb 1-1: request_fw_file() fw name zd1211/zd1211_uphr
usb 1-1: upload_code() transfer size 4096
usb 1-1: upload_code() transfer size 1024
usb 1-1: upload_code() firmware confirm return value 0x01
usb 1-1: khubd timed out on ep0out len=0/0 <=========================
from here on wards problem starts.
zd1211rw 1-1:1.0: probe() couldn't reset configuration. Error number -110
pxa27x-ohci pxa27x-ohci: GetStatus roothub.portstatus [0] = 0x00100103
PRSC PPS PES CCS
usb 1-1: reset full speed USB device using pxa27x-ohci and address 27
usb 1-1: khubd timed out on ep0in len=0/64
usb 1-1: khubd timed out on ep0in len=0/64
usb 1-1: khubd timed out on ep0in len=0/64
pxa27x-ohci pxa27x-ohci: GetStatus roothub.portstatus [0] = 0x00100103
PRSC PPS PES CCS
usb 1-1: device descriptor read/64, error -110
usb 1-1: khubd timed out on ep0in len=0/64
usb 1-1: khubd timed out on ep0in len=0/64
usb 1-1: khubd timed out on ep0in len=0/64
pxa27x-ohci pxa27x-ohci: GetStatus roothub.portstatus [0] = 0x00100103
PRSC PPS PES CCS
usb 1-1: device descriptor read/64, error -110
pxa27x-ohci pxa27x-ohci: GetStatus roothub.portstatus [0] = 0x00100103
PRSC PPS PES CCS
usb 1-1: reset full speed USB device using pxa27x-ohci and address 27
usb 1-1: khubd timed out on ep0in len=0/64
usb 1-1: khubd timed out on ep0in len=0/64
usb 1-1: khubd timed out on ep0in len=0/64
pxa27x-ohci pxa27x-ohci: GetStatus roothub.portstatus [0] = 0x00100103
PRSC PPS PES CCS
usb 1-1: device descriptor read/64, error -110
usb 1-1: khubd timed out on ep0in len=0/64
usb 1-1: khubd timed out on ep0in len=0/64
usb 1-1: khubd timed out on ep0in len=0/64
pxa27x-ohci pxa27x-ohci: GetStatus roothub.portstatus [0] = 0x00100103
PRSC PPS PES CCS
usb 1-1: device descriptor read/64, error -110
pxa27x-ohci pxa27x-ohci: GetStatus roothub.portstatus [0] = 0x00100103
PRSC PPS PES CCS
usb 1-1: reset full speed USB device using pxa27x-ohci and address 27
regards
Girish
--
----------------------------------------------------------------------
Girish A J ([EMAIL PROTECTED])
Associate - Systems, Ph: (80) 2361 8184-86 Ext 135
PicoPeta Simputers Pvt Ltd. (A subsidiary of Geodesic Information
Systems Ltd)
146 5th Cross, RMV Extension, Fax:(80) 2361 7568
Bangalore - 560 080.
URL http://www.picopeta.com
--------------------------------------------------------------------------
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
