* David Brownell <[EMAIL PROTECTED]> [070427 16:36]: > On Friday 27 April 2007, Felipe Balbi wrote: > > > tusb6010 + OTG Mode + g_ether static = this combination works. > > > > tusb6010 + OTG mode + g_ether module = not working. > > > > tusb6010 + OTG mode + g_file_storage static = not working > > > > tusb6010 + OTG mode + g_file_storage module = not working. > > But what does "not working" mean, exactly? > > The last many times I've tested -- albeit not on N800 hardware, but > on the H4 + TUSB 6010 EVM -- modular gadget drivers worked just fine. > Didn't test static, or non-OTG modes. > > I know there are some patches for musb_hdrc that you may be working > with, that I wasn't. And also that N800 clocks the TUSB chip from > the CPU oscillator, vs one private to the TUSB chip. All those > differences are potentially troublesome here ...
Heh, maybe what's going on here that Felipe does not have any gadget module loaded? If there's no gadget module loaded, the musb driver is not initialized. Felipe, can you check that? At least the host side works for me more or less with g_zero.ko loaded. Tony ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
