From: Eberhard Fahle <[EMAIL PROTECTED]>
The driver uses usb_control_msg() for exchanging data with the device.
When the driver lived freeley _outside_ the kernel tree (pre 2.6.21) the
timeouts for these calls where set to 5*HZ for reading, 1HZ for writing.
(These timeouts seemed to work fine for all users of the driver, at
least nobody complained in the last 2 years.
The current code (2.6.21-rc5) removed the 'HZ' from the timeouts and
left the driver with 5 jiffies for reading and 1 jiffy for writing. My
new machine is fast, but not that fast.
The patch also removes a useless debug statement, which was left over
from testing a broken firmware version
From: Eberhard Fahle <[EMAIL PROTECTED]>
Signed-off-by: Greg Kroah-Hartman <[EMAIL PROTECTED]>
---
drivers/usb/misc/iowarrior.c | 14 ++++++--------
1 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index de97ed7..fc51207 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -118,7 +118,7 @@ static int usb_get_report(struct usb_device *dev,
USB_DIR_IN | USB_TYPE_CLASS |
USB_RECIP_INTERFACE, (type << 8) + id,
inter->desc.bInterfaceNumber, buf, size,
- GET_TIMEOUT);
+ GET_TIMEOUT*HZ);
}
//#endif
@@ -133,7 +133,7 @@ static int usb_set_report(struct usb_interface *intf,
unsigned char type,
USB_TYPE_CLASS | USB_RECIP_INTERFACE,
(type << 8) + id,
intf->cur_altsetting->desc.bInterfaceNumber, buf,
- size, 1);
+ size, HZ);
}
/*---------------------*/
@@ -750,7 +750,6 @@ static int iowarrior_probe(struct usb_interface *interface,
struct usb_endpoint_descriptor *endpoint;
int i;
int retval = -ENOMEM;
- int idele = 0;
/* allocate memory for our device state and intialize it */
dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL);
@@ -826,11 +825,10 @@ static int iowarrior_probe(struct usb_interface
*interface,
/* Set the idle timeout to 0, if this is interface 0 */
if (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) {
- idele = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- 0x0A,
- USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0,
- 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
- dbg("idele = %d", idele);
+ usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ 0x0A,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0,
+ 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
}
/* allow device read and ioctl */
dev->present = 1;
--
1.5.1.2
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
