On Tue, May 01, 2007 at 05:49:01AM -0400, Gene Heskett wrote: > On Monday 30 April 2007, Greg KH wrote: > >On Sat, Apr 28, 2007 at 01:32:51PM -0400, Gene Heskett wrote: > >> Greetings; > >> > >> This is driving me batty (its just a short drive, folks) > >> > >> from /var/log/messages > >> > >> [EMAIL PROTECTED] rc3.d]# grep ttyUSB /var/log/messages > >> Apr 22 22:23:28 coyote kernel: usb 3-3.2: FTDI USB Serial Device converter > >> now attached to ttyUSB0 Apr 22 22:23:28 coyote kernel: usb 2-2.1: pl2303 > >> converter now attached to ttyUSB1 Apr 24 00:40:34 coyote kernel: usb > >> 3-3.2: FTDI USB Serial Device converter now attached to ttyUSB0 Apr 24 > >> 00:40:34 coyote kernel: usb 2-2.1: pl2303 converter now attached to > >> ttyUSB1 Apr 24 01:19:30 coyote kernel: usb 3-3.2: FTDI USB Serial Device > >> converter now attached to ttyUSB0 Apr 24 01:19:30 coyote kernel: usb > >> 2-2.1: pl2303 converter now attached to ttyUSB1 Apr 25 06:46:59 coyote > >> kernel: usb 2-2.1: pl2303 converter now attached to ttyUSB0 Apr 25 > >> 06:46:59 coyote kernel: usb 3-3.2: FTDI USB Serial Device converter now > >> attached to ttyUSB1 Apr 26 09:13:00 coyote kernel: usb 2-2.1: pl2303 > >> converter now attached to ttyUSB0 Apr 26 09:13:00 coyote kernel: usb > >> 3-3.2: FTDI USB Serial Device converter now attached to ttyUSB1 Apr 26 > >> 09:40:30 coyote kernel: pl2303 ttyUSB0: pl2303 converter now disconnected > >> from ttyUSB0 Apr 26 09:40:44 coyote kernel: usb 2-2.2: pl2303 converter > >> now attached to ttyUSB0 Apr 26 09:41:59 coyote kernel: pl2303 ttyUSB0: > >> pl2303 converter now disconnected from ttyUSB0 Apr 26 09:42:13 coyote > >> kernel: usb 3-3.1: pl2303 converter now attached to ttyUSB0 Apr 26 > >> 09:44:59 coyote kernel: pl2303 ttyUSB0: pl2303 converter now disconnected > >> from ttyUSB0 Apr 26 09:45:05 coyote kernel: usb 2-2.1: pl2303 converter > >> now attached to ttyUSB0 Apr 27 09:43:16 coyote kernel: usb 3-3.2: FTDI USB > >> Serial Device converter now attached to ttyUSB0 Apr 27 09:43:16 coyote > >> kernel: usb 2-2.1: pl2303 converter now attached to ttyUSB1 Apr 28 > >> 12:56:28 coyote kernel: usb 2-2.1: pl2303 converter now attached to > >> ttyUSB0 Apr 28 12:56:28 coyote kernel: usb 3-3.2: FTDI USB Serial Device > >> converter now attached to ttyUSB1 > > > >Are you yanking and plugging this device back in? If not, you have some > >flaky hardware there :( > > In the above instance, I had plugged it in to make sure it was recognized, > then assembled the rest of the cable and plugged it into a different hub, a > 2.0 hub. When I was using the pl2303's for that, they won't work unless > plugged into a usb1.1 hub, and I also have a 2.0 hub, which is where the FTDI > adapter is plugged in now, getting rid of one cable plugged into the front > panel breakout which is a 1.1 only hub. 3 years Old. > > >> During a boot to 2.6.21-sd046, it was one way, and now with 2.6.21-CFS-v7 > >> is reversed. I have NDI, nor can I connect mentally, the scheduler diffs > >> to this, it just doesn't grok. > > > >Does 2.6.21 work ok? > > Bare 2.6.21? NDI Greg, that mainline scheduler is such a pain compared to > the > 2 I'm playing with I haven't actually tried it.
I'd really like it if you could try it as that would rule out a whole raft of other issues :) thanks, greg k-h ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
