From: Rene van Paassen <[EMAIL PROTECTED]>
Now the old tool is remembered, and reset when a new tool is selected via
the sysfs files.
Signed-off-by: Rene van Paassen <[EMAIL PROTECTED]>
---
drivers/usb/input/aiptek.c | 98 ++++++++++++++++++++++++--------------------
1 files changed, 54 insertions(+), 44 deletions(-)
diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c
index 716b8fd..5cdd000 100644
--- a/drivers/usb/input/aiptek.c
+++ b/drivers/usb/input/aiptek.c
@@ -218,15 +218,9 @@
#define AIPTEK_WHEEL_DISABLE (-10101)
/* ToolCode values, which BTW are 0x140 .. 0x14f
- * We have things set up such that if TOOL_BUTTON_FIRED_BIT is
- * not set, we'll send one instance of AIPTEK_TOOL_BUTTON_xxx.
- *
- * Whenever the user resets the value, TOOL_BUTTON_FIRED_BIT will
- * get reset.
+ * We have things set up such that if the tool button has changed,
+ * the tools get reset.
*/
-#define TOOL_BUTTON(x) ((x) & 0x14f)
-#define TOOL_BUTTON_FIRED(x) ((x) & 0x200)
-#define TOOL_BUTTON_FIRED_BIT 0x200
/* toolMode codes
*/
#define AIPTEK_TOOL_BUTTON_PEN_MODE BTN_TOOL_PEN
@@ -326,6 +320,9 @@ struct aiptek {
int inDelay; /* jitter: in jitter delay?
*/
unsigned long endDelay; /* jitter: time when delay ends
*/
int previousJitterable; /* jitterable prev value */
+
+ int lastMacro; /* macro key to reset
*/
+ int previousToolMode; /* pen, pencil, brush, etc.
tool */
unsigned char *data; /* incoming packet data
*/
};
@@ -542,16 +539,18 @@ static void aiptek_irq(struct urb *urb)
* all 'bad' reports...
*/
if (dv != 0) {
- /* If we've not already sent a tool_button_??
code, do
- * so now. Then set FIRED_BIT so it won't be
resent unless
- * the user forces FIRED_BIT off.
+ /* If the selected tool changed, reset the old
+ tool key, and set the new one.
*/
- if (TOOL_BUTTON_FIRED
- (aiptek->curSetting.toolMode) == 0) {
+ if (aiptek->previousToolMode !=
+ aiptek->curSetting.toolMode) {
+ input_report_key(inputdev,
+
aiptek->previousToolMode, 0);
input_report_key(inputdev,
-
TOOL_BUTTON(aiptek->curSetting.toolMode),
+
aiptek->curSetting.toolMode,
1);
- aiptek->curSetting.toolMode |=
TOOL_BUTTON_FIRED_BIT;
+ aiptek->previousToolMode =
+ aiptek->curSetting.toolMode;
}
if (p != 0) {
@@ -612,16 +611,18 @@ static void aiptek_irq(struct urb *urb)
middle = (data[5] &
aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
if (dv != 0) {
- /* If we've not already sent a tool_button_??
code, do
- * so now. Then set FIRED_BIT so it won't be
resent unless
- * the user forces FIRED_BIT off.
+ /* If the selected tool changed, reset the old
+ tool key, and set the new one.
*/
- if (TOOL_BUTTON_FIRED
- (aiptek->curSetting.toolMode) == 0) {
+ if (aiptek->previousToolMode !=
+ aiptek->curSetting.toolMode) {
+ input_report_key(inputdev,
+
aiptek->previousToolMode, 0);
input_report_key(inputdev,
-
TOOL_BUTTON(aiptek->curSetting.toolMode),
+
aiptek->curSetting.toolMode,
1);
- aiptek->curSetting.toolMode |=
TOOL_BUTTON_FIRED_BIT;
+ aiptek->previousToolMode =
+ aiptek->curSetting.toolMode;
}
if (p != 0) {
@@ -662,15 +663,18 @@ static void aiptek_irq(struct urb *urb)
z = le16_to_cpu(get_unaligned((__le16 *) (data + 4)));
if (dv != 0) {
- /* If we've not already sent a tool_button_?? code, do
- * so now. Then set FIRED_BIT so it won't be resent
unless
- * the user forces FIRED_BIT off.
- */
- if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) ==
0) {
+ /* If the selected tool changed, reset the old
+ tool key, and set the new one.
+ */
+ if (aiptek->previousToolMode !=
+ aiptek->curSetting.toolMode) {
+ input_report_key(inputdev,
+ aiptek->previousToolMode, 0);
input_report_key(inputdev,
-
TOOL_BUTTON(aiptek->curSetting.toolMode),
+ aiptek->curSetting.toolMode,
1);
- aiptek->curSetting.toolMode |=
TOOL_BUTTON_FIRED_BIT;
+ aiptek->previousToolMode =
+ aiptek->curSetting.toolMode;
}
if (p != 0) {
@@ -710,15 +714,18 @@ static void aiptek_irq(struct urb *urb)
macro = data[3];
if (dv != 0) {
- /* If we've not already sent a tool_button_?? code, do
- * so now. Then set FIRED_BIT so it won't be resent
unless
- * the user forces FIRED_BIT off.
- */
- if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) ==
0) {
+ /* If the selected tool changed, reset the old
+ tool key, and set the new one.
+ */
+ if (aiptek->previousToolMode !=
+ aiptek->curSetting.toolMode) {
+ input_report_key(inputdev,
+ aiptek->previousToolMode, 0);
input_report_key(inputdev,
-
TOOL_BUTTON(aiptek->curSetting.toolMode),
+ aiptek->curSetting.toolMode,
1);
- aiptek->curSetting.toolMode |=
TOOL_BUTTON_FIRED_BIT;
+ aiptek->previousToolMode =
+ aiptek->curSetting.toolMode;
}
if (p != 0) {
@@ -762,15 +769,18 @@ static void aiptek_irq(struct urb *urb)
0);
}
- /* If we've not already sent a tool_button_?? code, do
- * so now. Then set FIRED_BIT so it won't be resent unless
- * the user forces FIRED_BIT off.
- */
- if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) {
+ /* If the selected tool changed, reset the old
+ tool key, and set the new one.
+ */
+ if (aiptek->previousToolMode !=
+ aiptek->curSetting.toolMode) {
+ input_report_key(inputdev,
+ aiptek->previousToolMode, 0);
input_report_key(inputdev,
- TOOL_BUTTON(aiptek->curSetting.
- toolMode), 1);
- aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
+ aiptek->curSetting.toolMode,
+ 1);
+ aiptek->previousToolMode =
+ aiptek->curSetting.toolMode;
}
input_report_key(inputdev, macroKeyEvents[macro], 1);
--
1.5.0.6
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
