On Mon, 7 May 2007 08:52:37 -0700 [EMAIL PROTECTED] wrote: > http://bugzilla.kernel.org/show_bug.cgi?id=8444 > > Summary: 16GB USB Stick not working > Kernel Version: 2.6.21.1 > Status: NEW > Severity: normal > Owner: [EMAIL PROTECTED] > Submitter: [EMAIL PROTECTED] > > > Distribution: > Debian Unstable > > Hardware Environment: > Dell Precision 300 > > 00:00.0 Host bridge: Intel Corporation 82955X Memory Controller Hub > 00:01.0 PCI bridge: Intel Corporation 82955X PCI Express Root Port > 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition > Audio Controller (rev 01) > 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 > (rev 01) > 00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express > Port 5 (rev 01) > 00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express > Port 6 (rev 01) > 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 > (rev 01) > 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 > (rev 01) > 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 > (rev 01) > 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 > (rev 01) > 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI > Controller (rev 01) > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) > 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface > Bridge (rev 01) > 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller > (rev 01) > 00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) Serial ATA > Storage Controller AHCI (rev 01) > 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev > 01) > 01:00.0 VGA compatible controller: nVidia Corporation NV44 [Quadro NVS 285] > (rev a1) > 03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit > Ethernet PCI Express (rev 11) > 04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit > Ethernet PCI Express (rev 01) > 05:02.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 61) > > > Problem Description: > 16GB version of the Corsair Flash Voyager isn't recognized. > dmesg output: > [ 306.444319] hub 1-0:1.0: hub_suspend > [ 306.444338] ehci_hcd 0000:00:1d.7: suspend root hub > [ 306.444360] usb usb1: usb auto-suspend > [ 310.697665] hub 1-0:1.0: state 8 ports 8 chg 0000 evt 0000 > [ 310.697673] usb usb1: usb auto-resume > [ 310.697676] usb usb1: finish resume > [ 310.697695] hub 1-0:1.0: hub_resume > [ 310.697699] ehci_hcd 0000:00:1d.7: resume root hub > [ 310.730267] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER > sig=j > CSC CONNECT > [ 310.730279] hub 1-0:1.0: port 8, status 0501, change 0001, 480 Mb/s > [ 310.850032] hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status > 0x501 > [ 310.903505] ehci_hcd 0000:00:1d.7: port 8 high speed > [ 310.903512] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER > sig=se0 PE CONNECT > [ 310.956516] usb 1-8: new high speed USB device using ehci_hcd and address 9 > [ 311.954802] usb 1-8: khubd timed out on ep0in len=0/64 > [ 312.896747] ehci_hcd 0000:00:1d.7: port 8 high speed > [ 312.896756] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER > sig=se0 PE CONNECT > [ 312.949778] usb 1-8: device descriptor read/64, error -32 > [ 313.106392] ehci_hcd 0000:00:1d.7: port 8 high speed > [ 313.106400] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER > sig=se0 PE CONNECT > [ 313.159438] usb 1-8: device descriptor read/64, error -32 > [ 313.316035] ehci_hcd 0000:00:1d.7: port 8 high speed > [ 313.316043] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER > sig=se0 PE CONNECT > [ 313.369090] usb 1-8: new high speed USB device using ehci_hcd and address > 10 > [ 313.422479] ehci_hcd 0000:00:1d.7: port 8 high speed > [ 313.422486] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER > sig=se0 PE CONNECT > [ 313.475536] usb 1-8: device descriptor read/64, error -32 > [ 313.632123] ehci_hcd 0000:00:1d.7: port 8 high speed > [ 313.632130] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER > sig=se0 PE CONNECT > [ 313.685176] usb 1-8: device descriptor read/64, error -32 > [ 313.841768] ehci_hcd 0000:00:1d.7: port 8 high speed > [ 313.841776] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER > sig=se0 PE CONNECT > [ 313.894819] usb 1-8: new high speed USB device using ehci_hcd and address > 11 > [ 314.300786] usb 1-8: device not accepting address 11, error -32 > [ 314.354273] ehci_hcd 0000:00:1d.7: port 8 high speed > [ 314.354281] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER > sig=se0 PE CONNECT > [ 314.407277] usb 1-8: new high speed USB device using ehci_hcd and address > 12 > [ 314.813259] usb 1-8: device not accepting address 12, error -32 > [ 314.813283] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000 > [ 316.809938] hub 1-0:1.0: hub_suspend > [ 316.809952] ehci_hcd 0000:00:1d.7: suspend root hub > [ 316.809973] usb usb1: usb auto-suspend > [ 345.712362] hub 1-0:1.0: state 8 ports 8 chg 0000 evt 0000 > [ 345.712370] usb usb1: usb auto-resume > [ 345.712373] usb usb1: finish resume > [ 345.712381] hub 1-0:1.0: hub_resume > [ 345.712385] ehci_hcd 0000:00:1d.7: resume root hub > [ 345.743656] ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001002 POWER > sig=se0 CSC > [ 345.743666] hub 1-0:1.0: port 8, status 0100, change 0001, 12 Mb/s > [ 345.863435] hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status > 0x100 > [ 345.863443] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000 > [ 347.860016] hub 1-0:1.0: hub_suspend > [ 347.860026] ehci_hcd 0000:00:1d.7: suspend root hub > [ 347.860047] usb usb1: usb auto-suspend > > I also tried kernel version 2.6.18.8. Same problem.
------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
