For MPC831x support, change the ehci-fsl driver to preserve
bits set in platform code. Add a common CONFIG_USB_EHCI_FSL
to indicate presence of Freescale EHCI SOC. Add FSL_USB2_DR_OTG
operating mode support, thus both host and device can work for the
mini-ab receptacle. Note: this doesn't enable OTG protocol
support.
Signed-off-by: Li Yang <[EMAIL PROTECTED]>
---
Select USB_EHCI_ROOT_HUB_TT when USB_EHCI_FSL is selected.
drivers/usb/host/Kconfig | 7 +++++++
drivers/usb/host/ehci-fsl.c | 10 +++++++---
drivers/usb/host/ehci-hcd.c | 2 +-
3 files changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 6271187..fc717c3 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -72,6 +72,13 @@ config USB_EHCI_BIG_ENDIAN_MMIO
depends on USB_EHCI_HCD
default n
+config USB_EHCI_FSL
+ bool
+ select USB_EHCI_ROOT_HUB_TT
+ default n
+ ---help---
+ Variation of ARC USB block used in some Freescale chips.
+
config USB_ISP116X_HCD
tristate "ISP116X HCD support"
depends on USB
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index a524805..e802a13 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -67,7 +67,8 @@ int usb_hcd_fsl_probe(const struct hc_driver *driver,
* in host mode.
*/
if (!((pdata->operating_mode == FSL_USB2_DR_HOST) ||
- (pdata->operating_mode == FSL_USB2_MPH_HOST))) {
+ (pdata->operating_mode == FSL_USB2_MPH_HOST) ||
+ (pdata->operating_mode == FSL_USB2_DR_OTG))) {
dev_err(&pdev->dev,
"Non Host Mode configured for %s. Wrong driver
linked.\n",
pdev->dev.bus_id);
@@ -185,15 +186,18 @@ static void mpc83xx_usb_setup(struct usb_hcd *hcd)
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct fsl_usb2_platform_data *pdata;
void __iomem *non_ehci = hcd->regs;
+ u32 temp;
pdata =
(struct fsl_usb2_platform_data *)hcd->self.controller->
platform_data;
/* Enable PHY interface in the control reg. */
- out_be32(non_ehci + FSL_SOC_USB_CTRL, 0x00000004);
+ temp = in_be32(non_ehci + FSL_SOC_USB_CTRL);
+ out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | 0x00000004);
out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0000001b);
- if (pdata->operating_mode == FSL_USB2_DR_HOST)
+ if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
+ (pdata->operating_mode == FSL_USB2_DR_OTG))
mpc83xx_setup_phy(ehci, pdata->phy_mode, 0);
if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index c7458f7..cc27a87 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -926,7 +926,7 @@ MODULE_LICENSE ("GPL");
#define PCI_DRIVER ehci_pci_driver
#endif
-#ifdef CONFIG_MPC834x
+#ifdef CONFIG_USB_EHCI_FSL
#include "ehci-fsl.c"
#define PLATFORM_DRIVER ehci_fsl_driver
#endif
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
