On Wed, May 16, 2007 at 06:04:45PM +0200, Jan Engelhardt wrote: > Hello, > > > I seem to have problems with the ark3116 driver from 2.6.18.8. This is a > USB-RS232 cable. Just opening the /dev/ttyUSB0 device > gives (this is the > debug output enabled by `modprobe ark3116 debug=1`). > > The lines that look suspicious are > /serial/ark3116.c: 124 < 1 bytes [0xFFFFFFB0] > and > /serial/ark3116.c: ark3116_ioctl cmd 0x5401 not supported
Why is this suspicious? We don't support all ioctls for all usb-serial drivers, perhaps this one is just not really needed? > I have also seen things like "id here < -62 [0x10]", which would > indicate that usb_control_msg() returned something very negative > (-ETIME!?). But does the driver seem to work properly? > Issuing a write() on an open fd to ttyUSB does not generate any further > debug output. Is the driver even complete/functional? Do you get data through the device properly? thanks, greg k-h ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
