EHCI Glue driver for Intel IXP4XX EHCI USB controller
Signed-off-by: Vladimir Barinov <[EMAIL PROTECTED]>
---------
--- usb-2.6.orig/drivers/usb/host/ehci.h 2007-05-03 14:17:41.000000000
+0400
+++ usb-2.6.new/drivers/usb/host/ehci.h 2007-05-03 14:26:38.000000000 +0400
@@ -734,6 +734,11 @@ ehci_port_speed(struct ehci_hcd *ehci, u
#define writel_be(val, addr) out_be32((__force unsigned *)addr, val)
#endif
+#if defined(CONFIG_ARM) && defined(CONFIG_ARCH_IXP4XX)
+#define readl_be(addr) __raw_readl((__force unsigned *)addr)
+#define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr)
+#endif
+
static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
__u32 __iomem * regs)
{
--- usb-2.6.orig/drivers/usb/host/ehci-hcd.c 2007-05-03 14:17:41.000000000
+0400
+++ usb-2.6.new/drivers/usb/host/ehci-hcd.c 2007-05-03 14:24:14.000000000
+0400
@@ -1019,6 +1019,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_ppc_soc_driver
#endif
+#ifdef CONFIG_ARCH_IXP4XX
+#include "ehci-ixp4xx.c"
+#define PLATFORM_DRIVER ixp4xx_ehci_driver
+#endif
+
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER)
#error "missing bus glue for ehci-hcd"
--- usb-2.6.orig/drivers/usb/host/ehci-ixp4xx.c 1970-01-01 03:00:00.000000000
+0300
+++ usb-2.6.new/drivers/usb/host/ehci-ixp4xx.c 2007-05-03 18:19:21.000000000
+0400
@@ -0,0 +1,152 @@
+/*
+ * IXP4XX EHCI Host Controller Driver
+ *
+ * Author: Vladimir Barinov <[EMAIL PROTECTED]>
+ *
+ * Based on "ehci-fsl.c" by David Brownell <[EMAIL PROTECTED]>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/platform_device.h>
+
+static int ixp4xx_ehci_init(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ int retval = 0;
+
+ ehci->big_endian_desc = 1;
+ ehci->big_endian_mmio = 1;
+
+ ehci->caps = hcd->regs + 0x100;
+ ehci->regs = hcd->regs + 0x100 +
+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+ ehci->is_tdi_rh_tt = 1;
+ ehci_reset(ehci);
+
+ retval = ehci_init(hcd);
+ if (retval)
+ return retval;
+
+ ehci_port_power(ehci, 0);
+
+ return retval;
+}
+
+static const struct hc_driver ixp4xx_ehci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "IXP4XX EHCI Host Controller",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+ .reset = ixp4xx_ehci_init,
+ .start = ehci_run,
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+ .get_frame_number = ehci_get_frame,
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+#if defined(CONFIG_PM)
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+#endif
+};
+
+static int ixp4xx_ehci_probe(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd;
+ const struct hc_driver *driver = &ixp4xx_ehci_hc_driver;
+ struct resource *res;
+ int irq;
+ int retval;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res) {
+ dev_err(&pdev->dev,
+ "Found HC with no IRQ. Check %s setup!\n",
+ pdev->dev.bus_id);
+ return -ENODEV;
+ }
+ irq = res->start;
+
+ hcd = usb_create_hcd(driver, &pdev->dev, pdev->dev.bus_id);
+ if (!hcd) {
+ retval = -ENOMEM;
+ goto fail_create_hcd;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev,
+ "Found HC with no register addr. Check %s setup!\n",
+ pdev->dev.bus_id);
+ retval = -ENODEV;
+ goto fail_request_resource;
+ }
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = res->end - res->start + 1;
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+ driver->description)) {
+ dev_dbg(&pdev->dev, "controller already in use\n");
+ retval = -EBUSY;
+ goto fail_request_resource;
+ }
+
+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+ if (hcd->regs == NULL) {
+ dev_dbg(&pdev->dev, "error mapping memory\n");
+ retval = -EFAULT;
+ goto fail_ioremap;
+ }
+
+ retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (retval)
+ goto fail_add_hcd;
+
+ return retval;
+
+fail_add_hcd:
+ iounmap(hcd->regs);
+fail_ioremap:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+fail_request_resource:
+ usb_put_hcd(hcd);
+fail_create_hcd:
+ dev_err(&pdev->dev, "init %s fail, %d\n", pdev->dev.bus_id, retval);
+ return retval;
+}
+
+static int ixp4xx_ehci_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+
+ return 0;
+}
+
+MODULE_ALIAS("ixp4xx-ehci");
+
+static struct platform_driver ixp4xx_ehci_driver = {
+ .probe = ixp4xx_ehci_probe,
+ .remove = ixp4xx_ehci_remove,
+ .driver = {
+ .name = "ixp4xx-ehci",
+ .bus = &platform_bus_type
+ },
+};
--- usb-2.6.orig/drivers/usb/Kconfig 2007-05-02 17:28:44.000000000 +0400
+++ usb-2.6.new/drivers/usb/Kconfig 2007-05-03 15:09:02.000000000 +0400
@@ -39,6 +39,7 @@ config USB_ARCH_HAS_EHCI
boolean
default y if PPC_83xx
default y if SOC_AU1200
+ default y if ARCH_IXP4XX
default PCI
# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
--- usb-2.6.orig/drivers/usb/host/Kconfig 2007-05-02 17:31:10.000000000
+0400
+++ usb-2.6.new/drivers/usb/host/Kconfig 2007-05-03 15:50:10.000000000
+0400
@@ -69,12 +69,12 @@ config USB_EHCI_TT_NEWSCHED
config USB_EHCI_BIG_ENDIAN_MMIO
bool
- depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX)
+ depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX ||
ARCH_IXP4XX)
default y
config USB_EHCI_BIG_ENDIAN_DESC
bool
- depends on USB_EHCI_HCD && 440EPX
+ depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX)
default y
config USB_ISP116X_HCD
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
