On Thu, 21 Jun 2007, Rafael J. Wysocki wrote: > > I'll see if I can reproduce your problem here. > > Yes, I can. It's only necessary to load usb-storage (without any devices > actually using it) and it fails device_suspend() immediately (I don't think > it's freezer-related). > > I've got the following trace from it: > > usb_endpoint usbdev3.2_ep81: PM: suspend 0->1, parent 3-1:1.0 already 2 > Suspending device 3-1:1.0 > Suspending device usbdev3.2_ep00 > Suspending device 3-1 > Suspending device eth1 > Suspending device eth0 > Suspending device usbdev3.1 > Suspending device usbdev3.1_ep81 > Suspending device 3-0:1.0 > Suspending device usbdev3.1_ep00 > Suspending device usb3 > hub 3-0:1.0: hub_suspend > ohci_hcd 0000:00:02.1: needs reinit! > usb usb3: suspend fail, err -16 > usb usb3: 'global' suspend -16
Odd. This has nothing at all to do with usb-storage. The "needs reinnit!" message means that an OHCI controller was in a reset state -- not running and not suspended -- when the suspend method was called. This happened with plain old 2.6.22-rc4-mm2? I'll try to reproduce it. Alan Stern ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
