On Fri, 29 Jun 2007 12:14:24 +0800 Lonsn <[EMAIL PROTECTED]> wrote: > In > the board side, kernel repeatedly printed following message every > several seconds. "g_file_storage gadget: full speed config #1". > What's wrong with it?
This usually means that the host gets confused about something the board does and issues a bus reset. In particular, I've seen Windows XP getting confused if it gets one or more NAKs before a STALL. At least that's what I _think_ happened when I tested this a few days ago. Tightening up the polling loop in halt_bulk_in_endpoint() in file_storage.c seemed to help (i.e. removing the call to msleep_interruptible.) Btw, I mostly saw this happening during SCSI initialization, not actual data transfer, and on a different controller (AT32AP7000.) But I imagine STALLs may happen occasionally during data transfer as well? Haavard ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
