On Thu, 5 Jul 2007, Gene Heskett wrote: > Greetings; > > I have a 40GB drive in a usb enclosure that when plugged in, signs on like > this in the dmesg output: > > usb 3-3.4.2: uevent > hub 3-3.4:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 > hub 3-3.4:1.0: state 7 ports 4 chg 0000 evt 0004 > hub 3-3.4:1.0: port 2, status 0101, change 0001, 12 Mb/s > hub 3-3.4:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 > hub 3-3.4:1.0: port 2 not reset yet, waiting 10ms > usb 3-3.4.2: new high speed USB device using ehci_hcd and address 12 > hub 3-3.4:1.0: port 2 not reset yet, waiting 10ms > usb 3-3.4.2: default language 0x0409 > usb 3-3.4.2: new device strings: Mfr=1, Product=2, SerialNumber=3 > usb 3-3.4.2: Product: Maxtor OneTouch III > usb 3-3.4.2: Manufacturer: Maxtor > usb 3-3.4.2: SerialNumber: RA01ZFQC > usb 3-3.4.2: uevent > usb 3-3.4.2: usb_probe_device > usb 3-3.4.2: configuration #1 chosen from 1 choice > usb 3-3.4.2: adding 3-3.4.2:1.0 (config #1, interface 0) > usb 3-3.4.2:1.0: uevent > usb 3-3.4.2:1.0: uevent > libusual 3-3.4.2:1.0: usb_probe_interface > libusual 3-3.4.2:1.0: usb_probe_interface - got id > usb-storage 3-3.4.2:1.0: usb_probe_interface > usb-storage 3-3.4.2:1.0: usb_probe_interface - got id > scsi2 : SCSI emulation for USB Mass Storage devices > drivers/usb/core/inode.c: creating file '012' > usb-storage: device found at 12 > usb-storage: waiting for device to settle before scanning > usb-storage: device scan complete > hub 3-3.4:1.0: port 2 not reset yet, waiting 10ms > usb 3-3.4.2: reset high speed USB device using ehci_hcd and address 12 > usb 3-3.4.2: usb-storage timed out on ep0in len=0/64 > ehci_hcd 0000:00:02.2: devpath 3.4.2 ep0in 3strikes > ehci_hcd 0000:00:02.2: devpath 3.4.2 ep0in 3strikes > hub 3-3.4:1.0: port 2 not reset yet, waiting 10ms > usb 3-3.4.2: device descriptor read/64, error -71 > hub 3-3.4:1.0: port 2 not reset yet, waiting 10ms > usb_endpoint usbdev3.12_ep01: ep_device_release called for usbdev3.12_ep01 > usb_endpoint usbdev3.12_ep82: ep_device_release called for usbdev3.12_ep82 > hub 3-3.4:1.0: port 2 not reset yet, waiting 10ms > usb 3-3.4.2: reset high speed USB device using ehci_hcd and address 12 > hub 3-3.4:1.0: port 2 not reset yet, waiting 10ms > > The power led on the case lights up just fine, but the drive doesn't spin up. > Plugged into my HP lappy (FC5), it spins up and automounts just fine but does > so at 1.1 speeds. > > My config.gz is attached. What am I missing?
Does the case use external power or does it run off USB bus power? If it is bus-powered, perhaps it isn't getting enough juice. Try turning on CONFIG_USB_STORAGE_DEBUG and see what shows up in the debugging log. Alan Stern ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
