From: Alan Stern <[EMAIL PROTECTED]>

This patch (as895) fixes up a loose end in the port-handover code for
the USB-Persist facility.  A special case occurs when a high-speed
device is attached to a port which the user has designated to run at
full-speed only; the port must be disabled before the handover can
take place.

Signed-off-by: Alan Stern <[EMAIL PROTECTED]>
Signed-off-by: Greg Kroah-Hartman <[EMAIL PROTECTED]>
 drivers/usb/host/ehci-hub.c |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 3e80de7..27291f5 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -60,11 +60,13 @@ static void ehci_handover_companion_ports(struct ehci_hcd 
        while (port--) {
                if (test_bit(port, &ehci->owned_ports)) {
                        reg = &ehci->regs->port_status[port];
-                       status = ehci_readl(ehci, reg);
+                       status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
                        /* Port already owned by companion? */
                        if (status & PORT_OWNER)
                                clear_bit(port, &ehci->owned_ports);
+                       else if (test_bit(port, &ehci->companion_ports))
+                               ehci_writel(ehci, status & ~PORT_PE, reg);
                                ehci_hub_control(hcd, SetPortFeature,
                                                USB_PORT_FEAT_RESET, port + 1,

This email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
To unsubscribe, use the last form field at:

Reply via email to