Hi,
I'm having a slight problem using the gadget serial device on an
AT91SAM9260 board. When trying to connect to a virtual console on
windows or the ACM driver on linux, it seems I'm receive a control
message to do a SET_LINE_CODE (baudrate,parity, etc).
Looking at the code, this seems to be handled in gs_setup()in serial.c,
but I don't see where the "data" is being read into the "req->buf". The
port_line_coding receives bad data when I connect it to the ACM linux
driver.
As a result of the "line code data" not being read from the EP0 fifo,
the board evenutually resets itself (soft lockup) because the fifo is
never emptied.
Thanks for any help,
Ken Watson
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
