This patch (as949) changes the usbmon driver to use the new urb->ep
field rather than urb->pipe.
Signed-off-by: Alan Stern <[EMAIL PROTECTED]>
cc: Pete Zaitcev <[EMAIL PROTECTED]>
---
Index: usb-2.6/drivers/usb/mon/mon_bin.c
===================================================================
--- usb-2.6.orig/drivers/usb/mon/mon_bin.c
+++ usb-2.6/drivers/usb/mon/mon_bin.c
@@ -354,7 +354,7 @@ static inline char mon_bin_get_setup(uns
const struct urb *urb, char ev_type)
{
- if (!usb_pipecontrol(urb->pipe) || ev_type != 'S')
+ if (!usb_endpoint_xfer_control(&urb->ep->desc) || ev_type != 'S')
return '-';
if (urb->dev->bus->uses_dma &&
@@ -410,7 +410,7 @@ static void mon_bin_event(struct mon_rea
if (length >= rp->b_size/5)
length = rp->b_size/5;
- if (usb_pipein(urb->pipe)) {
+ if (usb_urb_dir_in(urb)) {
if (ev_type == 'S') {
length = 0;
data_tag = '<';
@@ -440,10 +440,22 @@ static void mon_bin_event(struct mon_rea
*/
memset(ep, 0, PKT_SIZE);
ep->type = ev_type;
- ep->xfer_type = usb_pipetype(urb->pipe);
- /* We use the fact that usb_pipein() returns 0x80 */
- ep->epnum = usb_pipeendpoint(urb->pipe) | usb_pipein(urb->pipe);
- ep->devnum = usb_pipedevice(urb->pipe);
+ switch (usb_endpoint_type(&urb->ep->desc)) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ ep->xfer_type = PIPE_CONTROL;
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ ep->xfer_type = PIPE_BULK;
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ ep->xfer_type = PIPE_INTERRUPT;
+ break;
+ default:
+ ep->xfer_type = PIPE_ISOCHRONOUS;
+ break;
+ }
+ ep->epnum = urb->ep->desc.bEndpointAddress;
+ ep->devnum = urb->dev->devnum;
ep->busnum = urb->dev->bus->busnum;
ep->id = (unsigned long) urb;
ep->ts_sec = ts.tv_sec;
@@ -500,10 +512,22 @@ static void mon_bin_error(void *data, st
memset(ep, 0, PKT_SIZE);
ep->type = 'E';
- ep->xfer_type = usb_pipetype(urb->pipe);
- /* We use the fact that usb_pipein() returns 0x80 */
- ep->epnum = usb_pipeendpoint(urb->pipe) | usb_pipein(urb->pipe);
- ep->devnum = usb_pipedevice(urb->pipe);
+ switch (usb_endpoint_type(&urb->ep->desc)) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ ep->xfer_type = PIPE_CONTROL;
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ ep->xfer_type = PIPE_BULK;
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ ep->xfer_type = PIPE_INTERRUPT;
+ break;
+ default:
+ ep->xfer_type = PIPE_ISOCHRONOUS;
+ break;
+ }
+ ep->epnum = urb->ep->desc.bEndpointAddress;
+ ep->devnum = urb->dev->devnum;
ep->busnum = urb->dev->bus->busnum;
ep->id = (unsigned long) urb;
ep->status = error;
Index: usb-2.6/drivers/usb/mon/mon_main.c
===================================================================
--- usb-2.6.orig/drivers/usb/mon/mon_main.c
+++ usb-2.6/drivers/usb/mon/mon_main.c
@@ -154,8 +154,8 @@ static void mon_complete(struct usb_bus
* This should not happen.
* At this point we do not even know the bus number...
*/
- printk(KERN_ERR TAG ": Null mon bus in URB, pipe 0x%x\n",
- urb->pipe);
+ printk(KERN_ERR TAG ": Null mon bus in URB, address %p\n",
+ urb);
return;
}
Index: usb-2.6/drivers/usb/mon/mon_text.c
===================================================================
--- usb-2.6.orig/drivers/usb/mon/mon_text.c
+++ usb-2.6/drivers/usb/mon/mon_text.c
@@ -50,10 +50,12 @@ struct mon_iso_desc {
struct mon_event_text {
struct list_head e_link;
int type; /* submit, complete, etc. */
- unsigned int pipe; /* Pipe */
unsigned long id; /* From pointer, most of the time */
unsigned int tstamp;
+ int xfertype;
int busnum;
+ int devnum;
+ int epnum;
int length; /* Depends on type: xfer length or act length */
int status;
int interval;
@@ -61,6 +63,7 @@ struct mon_event_text {
int error_count;
char setup_flag;
char data_flag;
+ char is_in;
int numdesc; /* Full number */
struct mon_iso_desc isodesc[ISODESC_MAX];
unsigned char setup[SETUP_MAX];
@@ -121,7 +124,7 @@ static inline char mon_text_get_setup(st
struct urb *urb, char ev_type, struct mon_bus *mbus)
{
- if (!usb_pipecontrol(urb->pipe) || ev_type != 'S')
+ if (ep->xfertype != USB_ENDPOINT_XFER_CONTROL || ev_type != 'S')
return '-';
if (urb->dev->bus->uses_dma &&
@@ -138,14 +141,12 @@ static inline char mon_text_get_setup(st
static inline char mon_text_get_data(struct mon_event_text *ep, struct urb
*urb,
int len, char ev_type, struct mon_bus *mbus)
{
- int pipe = urb->pipe;
-
if (len <= 0)
return 'L';
if (len >= DATA_MAX)
len = DATA_MAX;
- if (usb_pipein(pipe)) {
+ if (ep->is_in) {
if (ev_type != 'C')
return '<';
} else {
@@ -203,24 +204,28 @@ static void mon_text_event(struct mon_re
}
ep->type = ev_type;
- ep->pipe = urb->pipe;
ep->id = (unsigned long) urb;
ep->busnum = urb->dev->bus->busnum;
+ ep->devnum = urb->dev->devnum;
+ ep->epnum = usb_endpoint_num(&urb->ep->desc);
+ ep->xfertype = usb_endpoint_type(&urb->ep->desc);
+ ep->is_in = usb_urb_dir_in(urb);
ep->tstamp = stamp;
ep->length = (ev_type == 'S') ?
urb->transfer_buffer_length : urb->actual_length;
/* Collecting status makes debugging sense for submits, too */
ep->status = urb->status;
- if (usb_pipeint(urb->pipe)) {
+ if (ep->xfertype == USB_ENDPOINT_XFER_INT) {
ep->interval = urb->interval;
- } else if (usb_pipeisoc(urb->pipe)) {
+ } else if (ep->xfertype == USB_ENDPOINT_XFER_ISOC) {
ep->interval = urb->interval;
ep->start_frame = urb->start_frame;
ep->error_count = urb->error_count;
}
ep->numdesc = urb->number_of_packets;
- if (usb_pipeisoc(urb->pipe) && urb->number_of_packets > 0) {
+ if (ep->xfertype == USB_ENDPOINT_XFER_ISOC &&
+ urb->number_of_packets > 0) {
if ((ndesc = urb->number_of_packets) > ISODESC_MAX)
ndesc = ISODESC_MAX;
fp = urb->iso_frame_desc;
@@ -268,9 +273,12 @@ static void mon_text_error(void *data, s
}
ep->type = 'E';
- ep->pipe = urb->pipe;
ep->id = (unsigned long) urb;
ep->busnum = 0;
+ ep->devnum = urb->dev->devnum;
+ ep->epnum = usb_endpoint_num(&urb->ep->desc);
+ ep->xfertype = usb_endpoint_type(&urb->ep->desc);
+ ep->is_in = usb_urb_dir_in(urb);
ep->tstamp = 0;
ep->length = 0;
ep->status = error;
@@ -413,10 +421,10 @@ static ssize_t mon_text_read_u(struct fi
mon_text_read_head_u(rp, &ptr, ep);
if (ep->type == 'E') {
mon_text_read_statset(rp, &ptr, ep);
- } else if (usb_pipeisoc(ep->pipe)) {
+ } else if (ep->xfertype == USB_ENDPOINT_XFER_ISOC) {
mon_text_read_isostat(rp, &ptr, ep);
mon_text_read_isodesc(rp, &ptr, ep);
- } else if (usb_pipeint(ep->pipe)) {
+ } else if (ep->xfertype == USB_ENDPOINT_XFER_INT) {
mon_text_read_intstat(rp, &ptr, ep);
} else {
mon_text_read_statset(rp, &ptr, ep);
@@ -468,18 +476,17 @@ static void mon_text_read_head_t(struct
{
char udir, utype;
- udir = usb_pipein(ep->pipe) ? 'i' : 'o';
- switch (usb_pipetype(ep->pipe)) {
- case PIPE_ISOCHRONOUS: utype = 'Z'; break;
- case PIPE_INTERRUPT: utype = 'I'; break;
- case PIPE_CONTROL: utype = 'C'; break;
+ udir = (ep->is_in ? 'i' : 'o');
+ switch (ep->xfertype) {
+ case USB_ENDPOINT_XFER_ISOC: utype = 'Z'; break;
+ case USB_ENDPOINT_XFER_INT: utype = 'I'; break;
+ case USB_ENDPOINT_XFER_CONTROL: utype = 'C'; break;
default: /* PIPE_BULK */ utype = 'B';
}
p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt,
"%lx %u %c %c%c:%03u:%02u",
ep->id, ep->tstamp, ep->type,
- utype, udir,
- usb_pipedevice(ep->pipe), usb_pipeendpoint(ep->pipe));
+ utype, udir, ep->devnum, ep->epnum);
}
static void mon_text_read_head_u(struct mon_reader_text *rp,
@@ -487,18 +494,17 @@ static void mon_text_read_head_u(struct
{
char udir, utype;
- udir = usb_pipein(ep->pipe) ? 'i' : 'o';
- switch (usb_pipetype(ep->pipe)) {
- case PIPE_ISOCHRONOUS: utype = 'Z'; break;
- case PIPE_INTERRUPT: utype = 'I'; break;
- case PIPE_CONTROL: utype = 'C'; break;
+ udir = (ep->is_in ? 'i' : 'o');
+ switch (ep->xfertype) {
+ case USB_ENDPOINT_XFER_ISOC: utype = 'Z'; break;
+ case USB_ENDPOINT_XFER_INT: utype = 'I'; break;
+ case USB_ENDPOINT_XFER_CONTROL: utype = 'C'; break;
default: /* PIPE_BULK */ utype = 'B';
}
p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt,
"%lx %u %c %c%c:%d:%03u:%u",
ep->id, ep->tstamp, ep->type,
- utype, udir,
- ep->busnum, usb_pipedevice(ep->pipe), usb_pipeendpoint(ep->pipe));
+ utype, udir, ep->busnum, ep->devnum, ep->epnum);
}
static void mon_text_read_statset(struct mon_reader_text *rp,
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
