You need to make them, you might see if they are already in /dev/usb. On Sun, 18 Sep 2005 [EMAIL PROTECTED] wrote:
> Hello, > > I'm running: > Gentoo 2005.1, kernel 2.6.12 gentoo r10. I have a USB device that uses > the FTDI driver (in the kernel) to make the device appear as a serial > port. > > When I plug in the device I get the following in my syslog: > > Sep 18 03:31:23 (none) usb 2-1: new full speed USB device using uhci_hcd > and address 2 > Sep 18 03:31:23 (none) ftdi_sio 2-1:1.0: FTDI FT232BM Compatible > converter detected > Sep 18 03:31:23 (none) usb 2-1: FTDI FT232BM Compatible converter now > attached to ttyUSB0 > > but alas, there is no /dev/ttyUSB0. > > Any suggestions of where I might look for what went wrong? > > Below are my kernel config parameters that relate to USB. > > Thanks in advance, > Michael > > > > > # grep -i usb .config > # USB devices > # CONFIG_SND_USB_AUDIO is not set > # CONFIG_SND_USB_USX2Y is not set > # USB support > CONFIG_USB_ARCH_HAS_HCD=y > CONFIG_USB_ARCH_HAS_OHCI=y > CONFIG_USB=y > # CONFIG_USB_DEBUG is not set > # Miscellaneous USB options > CONFIG_USB_DEVICEFS=y > # CONFIG_USB_BANDWIDTH is not set > # CONFIG_USB_DYNAMIC_MINORS is not set > # CONFIG_USB_SUSPEND is not set > # CONFIG_USB_OTG is not set > # USB Host Controller Drivers > CONFIG_USB_EHCI_HCD=y > # CONFIG_USB_EHCI_SPLIT_ISO is not set > # CONFIG_USB_EHCI_ROOT_HUB_TT is not set > CONFIG_USB_OHCI_HCD=y > # CONFIG_USB_OHCI_BIG_ENDIAN is not set > CONFIG_USB_OHCI_LITTLE_ENDIAN=y > CONFIG_USB_UHCI_HCD=y > # CONFIG_USB_SL811_HCD is not set > # USB Device Class drivers > # CONFIG_USB_AUDIO is not set > # CONFIG_USB_BLUETOOTH_TTY is not set > # CONFIG_USB_MIDI is not set > # CONFIG_USB_ACM is not set > CONFIG_USB_PRINTER=y > # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be > # needed; see USB_STORAGE Help for more information > CONFIG_USB_STORAGE=y > # CONFIG_USB_STORAGE_DEBUG is not set > # CONFIG_USB_STORAGE_DATAFAB is not set > # CONFIG_USB_STORAGE_FREECOM is not set > # CONFIG_USB_STORAGE_ISD200 is not set > # CONFIG_USB_STORAGE_DPCM is not set > # CONFIG_USB_STORAGE_USBAT is not set > # CONFIG_USB_STORAGE_SDDR09 is not set > # CONFIG_USB_STORAGE_SDDR55 is not set > # CONFIG_USB_STORAGE_JUMPSHOT is not set > # USB Input Devices > CONFIG_USB_HID=y > CONFIG_USB_HIDINPUT=y > # CONFIG_USB_HIDDEV is not set > # CONFIG_USB_AIPTEK is not set > # CONFIG_USB_WACOM is not set > # CONFIG_USB_KBTAB is not set > # CONFIG_USB_POWERMATE is not set > # CONFIG_USB_MTOUCH is not set > CONFIG_USB_EGALAX=m > # CONFIG_USB_XPAD is not set > # CONFIG_USB_ATI_REMOTE is not set > # USB Imaging devices > # CONFIG_USB_MDC800 is not set > # CONFIG_USB_MICROTEK is not set > # USB Multimedia devices > # CONFIG_USB_DABUSB is not set > # Video4Linux support is needed for USB Multimedia device support > # USB Network Adapters > # CONFIG_USB_CATC is not set > # CONFIG_USB_KAWETH is not set > # CONFIG_USB_PEGASUS is not set > # CONFIG_USB_RTL8150 is not set > # CONFIG_USB_USBNET is not set > # CONFIG_USB_ZD1201 is not set > CONFIG_USB_MON=y > # USB port drivers > # CONFIG_USB_USS720 is not set > # USB Serial Converter support > CONFIG_USB_SERIAL=y > # CONFIG_USB_SERIAL_CONSOLE is not set > # CONFIG_USB_SERIAL_GENERIC is not set > # CONFIG_USB_SERIAL_AIRPRIME is not set > # CONFIG_USB_SERIAL_BELKIN is not set > # CONFIG_USB_SERIAL_WHITEHEAT is not set > # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set > # CONFIG_USB_SERIAL_CP2101 is not set > # CONFIG_USB_SERIAL_CYPRESS_M8 is not set > # CONFIG_USB_SERIAL_EMPEG is not set > CONFIG_USB_SERIAL_FTDI_SIO=y > # CONFIG_USB_SERIAL_VISOR is not set > # CONFIG_USB_SERIAL_IPAQ is not set > # CONFIG_USB_SERIAL_IR is not set > # CONFIG_USB_SERIAL_EDGEPORT is not set > # CONFIG_USB_SERIAL_EDGEPORT_TI is not set > # CONFIG_USB_SERIAL_GARMIN is not set > # CONFIG_USB_SERIAL_IPW is not set > # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set > # CONFIG_USB_SERIAL_KEYSPAN is not set > # CONFIG_USB_SERIAL_KLSI is not set > # CONFIG_USB_SERIAL_KOBIL_SCT is not set > # CONFIG_USB_SERIAL_MCT_U232 is not set > # CONFIG_USB_SERIAL_PL2303 is not set > # CONFIG_USB_SERIAL_HP4X is not set > # CONFIG_USB_SERIAL_SAFE is not set > # CONFIG_USB_SERIAL_TI is not set > # CONFIG_USB_SERIAL_CYBERJACK is not set > # CONFIG_USB_SERIAL_XIRCOM is not set > # CONFIG_USB_SERIAL_OMNINET is not set > # USB Miscellaneous drivers > # CONFIG_USB_EMI62 is not set > # CONFIG_USB_EMI26 is not set > # CONFIG_USB_AUERSWALD is not set > # CONFIG_USB_RIO500 is not set > # CONFIG_USB_LEGOTOWER is not set > # CONFIG_USB_LCD is not set > # CONFIG_USB_LED is not set > CONFIG_USB_CYTHERM=m > # CONFIG_USB_PHIDGETKIT is not set > CONFIG_USB_PHIDGETSERVO=m > # CONFIG_USB_IDMOUSE is not set > # CONFIG_USB_SISUSBVGA is not set > # CONFIG_USB_TEST is not set > # USB ATM/DSL drivers > # USB Gadget Support > # CONFIG_USB_GADGET is not set > > > ------------------------------------------------------- > SF.Net email is sponsored by: > Tame your development challenges with Apache's Geronimo App Server. Download > it for free - -and be entered to win a 42" plasma tv or your very own > Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php > _______________________________________________ > [email protected] > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
