On Sun, Jan 09, 2005 at 12:34:50PM -0500, Alan Stern wrote: > On Sun, 9 Jan 2005, Eero Heino wrote: > > > > You can try using the "old_scheme_first=y" module parameter for the > > > usbcore module. I don't know that it will help, but maybe it will... > > > > > > Alan Stern > > > > > > > I loaded usbcore with the "old_scheme_first=y" parameter > > and when I connect the adapter I get > > > > kernel: usb 1-2: Product: USB 10M HomePNA Adapter > > kernel: usb 1-2: Manufacturer: Generic > > kernel: usb 1-2: SerialNumber: 00E0989BC8B3 > > kernel: drivers/usb/net/kaweth.c: Downloading firmware... > > usb.agent[4344]: kaweth: already loaded > > kernel: drivers/usb/net/kaweth.c: Firmware loaded. I'll be back... > > kernel: kaweth: probe of 1-2:1.0 failed with error -5 > > kernel: usb 1-2: USB disconnect, address 6 > > kernel: usb 1-2: new full speed USB device using ohci_hcd and address 7 > > usb 1-2: device descriptor read/8, error -71 > > usb 1-2: device descriptor read/8, error -71 > > kernel: usb 1-2: new full speed USB device using ohci_hcd and address 8 > > usb 1-2: device descriptor read/8, error -71 > > usb 1-2: device descriptor read/8, error -71 > > Then I'm fresh out of ideas. >
Huge delay but now the device works! It's also possible that other HPNA 1-2 devices with bcm42u chip in them will work. The driver called bcm42u can be found at http://bcm42u.unknownplatoon.org/ and also from freshmeat.net. Eero Heino ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
